Nimbus WiMi6220 Overview
The WiMi6220 Wireless 3G-SDI & HDMI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi6220 receiver as a point-to-point Wi-Fi transmission system with a 4921' range and only 80ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. This model can be powered using the included Gold mount battery plate or via the 2-pin LEMO power connector for continuous power.
The transmitter encodes and sends up to a 1080p60 SDI or HDMI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video. The transmitter is also capable of multicasting to up to four receivers at the same time over the same range and with the same near-zero delay.
An Ethernet port, which allows for CCU/PTZ camera control, can also be used for wired connectivity and 1080p60 transmission to the receiver via Cat 5e cable. The WiMi6220 transmitter also features an RS-422 interface and a two-way talk-back audio jack. With a corresponding audio jack available on the receiver, the talk-back port allows connecting a headset mic for communicating with talent. The WiMi6220 transmitter offers a 1/4" -20 mounting thread on the bottom.
Key Features
- 4921' range over 5 GHz Wi-Fi
- 80ms latency
- Includes Gold mount battery plate
- Encodes and sends up to a 1080p60 SDI or HDMI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)
- RTSP streaming server (RTP/UDP)
- MPEG2TS streaming (UDP)
- 3G/HD/SD-SDI and HDMI inputs
- Ethernet port for CCU/PTZ control or wired connectivity and 1080p60 transmission
- Two-way talk-back audio jack for headset mic communication
- RS-422 interface
- Baseline profile with level 4.2
- 2-pin LEMO power input
- USB firmware update port
- 1/4" -20 mounting thread
EAN: 193913000226
Nimbus WiMi6220 Specs
Wireless
| Wireless Range | 4921.26' / 1500 m (Line-of-Sight) |
| # of Channels | 12 (40 MHz) 24 (20 MHz) |
| Frequency Range | 5.15 to 5.25 GHz 5.25 to 5.35 GHz 5.47 to 5.72 GHz 5.72 to 5.85 GHz |
| Latency | 80 ms |
| Wi-Fi | 5 GHz Wi-Fi 5 (802.11ac) |
Interfaces
| Video I/O | 1x BNC (3G-SDI / HD-SDI / SD-SDI) Input 1x HDMI Input |
| Audio I/O | 1x 1/8" / 3.5 mm TRS Stereo |
| Other I/O | 1x RJ45 10/100 Ethernet 1x RJ45 RS-422 1x Unspecified Interface |
| Embedded Audio | SDI HDMI |
Format Support
| Video Format | SDI/BNC: 1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 1080PsF at 23.98, 24, 25, 29.97, 30 fps SDI/BNC: 1080i at 50, 59.94, 60 fps SDI/BNC: 720p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 576i at 50 fps SDI/BNC: 480i at 59.94 fps HDMI: 1080p at 24, 30, 50, 59.94, 60 fps HDMI: 1080i/720p at 50, 59.94 fps HDMI: 576p/576i at 50 fps HDMI: 480p at 59.94, 60 fps HDMI: 480i at 59.94 fps |
| Audio Format | 16-Bit 48 kHz LPCM Audio |
| Video Standard Compliance | SMPTE 259M/274M/292M/296M/425M ITU -R BT.601 |
Power
| Battery Support | 1x Gold Mount |
| Power I/O | 1x LEMO 2-Pin (6.8 to 16 VDC) Input |
| Power Consumption | Device: (11 W) |
General
| Mounting | 1x 1/4"-20 Female |
| Dimensions | 5.67 x 3.58 x 1.02" / 14.4 x 9.1 x 2.6 cm |
In the Box
- Nimbus WiMi6220 Wireless 3G-SDI & HDMI H.264 Encoder/Transmitter (Gold Mount)
- 3 x Bar Antenna (6 dBi)
- RJ45 Adapter for RS-422
- Gold Mount Battery Plate
- 2-Year Manufacturer Warranty
No posts found
