Wirelessly transmit high-quality HD video up to 1080p60 up to 4921' away using a 5 GHz Wi-Fi signal with this WiMi6220 Wireless Transmission System Bundle from Nimbus. The bundle includes one WiMi6220 3G-SDI/HDMI H.264 encoder transmitter and two WiMi6220 3G-SDI/HDMI decoder/receivers.
The transmitter can encode and send 3G/HD/SD-SDI or HDMI video to both receivers simultaneously with virtually zero latency. Each unit features a Gold mount battery plate, a DCA12M DC power adapter, a 1/4"-20 mounting thread, and three adjustable RP-SMA antennas. An RJ45 adapter is included to provide RS-422 control, and a talkback jack allows you to provide audio connectivity.
Nimbus WiMi6220 Wireless 3G-SDI & HDMI H.264 Encoder/Transmitter (Gold Mount)
The WiMi6220 Wireless 3G-SDI & HDMI H.264 Encoder/Transmitter from Nimbus pairs with an optional WiMi6220 receiver as a point-to-point Wi-Fi transmission system with a 4921' range and only 80ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. This model can be powered using the included Gold mount battery plate or via the 2-pin LEMO power connector for continuous power.
The transmitter encodes and sends up to a 1080p60 SDI or HDMI signal as an H.264 encoded signal, and the receiver decodes and outputs it as video. The transmitter is also capable of multicasting to up to four receivers at the same time over the same range and with the same near-zero delay.
An Ethernet port, which allows for CCU/PTZ camera control, can also be used for wired connectivity and 1080p60 transmission to the receiver via Cat 5e cable. The WiMi6220 transmitter also features an RS-422 interface and a two-way talk-back audio jack. With a corresponding audio jack available on the receiver, the talk-back port allows connecting a headset mic for communicating with talent. The WiMi6220 transmitter offers a 1/4"-20 mounting thread on the bottom.
- 4921' range over 5 GHz Wi-Fi
- 80ms latency
- Includes Gold mount battery plate
- Encodes and sends up to a 1080p60 SDI or HDMI signal in H.264 MPEG-4 Parts 10: AVC (decoded by optional receiver)
- RTSP streaming server (RTP/UDP)
- MPEG2TS streaming (UDP)
- 3G/HD/SD-SDI and HDMI inputs
- Ethernet port for CCU/PTZ control or wired connectivity and 1080p60 transmission
- Two-way talk-back audio jack for headset mic communication
- RS-422 interface
- Baseline profile with level 4.2
- 2-pin LEMO power input
- USB firmware update port
- 1/4"-20 mounting thread
EAN: 193913000226
Nimbus WiMi6220 Wireless 3G-SDI & HDMI H.264 Decoder/Receiver (Gold Mount)
The WiMi6220 Wireless 3G-SDI & HDMI H.264 Decoder/Receiver from Nimbus pairs with an optional WiMi6220 transmitter as a point-to-point Wi-Fi transmission system with a 4921' range and only 80ms latency. With both units featuring built-in 5 GHz Wi-Fi, no additional network connection is required. This unit can be powered using the included Gold mount battery plate or via the included power adapter.
The receiver accepts up to a 1080p60 SDI or HDMI signal encoded in H.264 by the transmitter, and it decodes and outputs it as video. Up to four receivers can be paired to a single transmitter for multicasting over the same range and with the same near-zero delay.
An Ethernet port, which allows for CCU/PTZ camera control, can also be used for wired connectivity and 1080p60 transmission with a Cat 5e cable. The WiMi6220 receiver features an RS-422 interface and a two-way talk-back audio jack. With a corresponding audio jack available on the transmitter, the talk-back port allows connecting a headset mic for communication with talent. For mounting, it offers a 1/4"-20 mounting thread on the bottom.
- 4921' range over 5 GHz Wi-Fi
- 80ms latency
- Gold mount battery plate and power adapter included
- Up to 1080p60 SDI and HDMI resolutions
- Decodes H.264 file received from the transmitter and outputs it as video
- RTSP streaming server (RTP/UDP)
- MPEG2TS streaming (UDP)
- Relay streaming server (RTSP/MPEG2TS)
- Up to four units can be paired with a single transmitter, sold separately, for simultaneous multicasting
- 3G/HD/SD-SDI and HDMI outputs
- Ethernet port for CCU/PTZ control or wired connectivity and 1080p60 transmission
- Two-way talk-back audio jack for headset mic communication
- RS-422 interface
- Baseline profile with level 4.2
- USB firmware update port
- 1/4"-20 mounting thread
EAN: 193913000233
Nimbus WiMi6220 Wireless 3G-SDI & HDMI H.264 Encoder/Transmitter (Gold Mount) Specs
Wireless
| Wireless Range | 4921.26' / 1500 m (Line-of-Sight) |
| # of Channels | 12 (40 MHz) 24 (20 MHz) |
| Frequency Range | 5.15 to 5.25 GHz 5.25 to 5.35 GHz 5.47 to 5.72 GHz 5.72 to 5.85 GHz |
| Latency | 80 ms |
| Wi-Fi | 5 GHz Wi-Fi 5 (802.11ac) |
Interfaces
| Video I/O | 1x BNC (3G-SDI / HD-SDI / SD-SDI) Input 1x HDMI Input |
| Audio I/O | 1x 1/8" / 3.5 mm TRS Stereo |
| Other I/O | 1x RJ45 10/100 Ethernet 1x RJ45 RS-422 1x Unspecified Interface |
| Embedded Audio | SDI HDMI |
Format Support
| Video Format | SDI/BNC: 1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 1080PsF at 23.98, 24, 25, 29.97, 30 fps SDI/BNC: 1080i at 50, 59.94, 60 fps SDI/BNC: 720p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 576i at 50 fps SDI/BNC: 480i at 59.94 fps HDMI: 1080p at 24, 30, 50, 59.94, 60 fps HDMI: 1080i/720p at 50, 59.94 fps HDMI: 576p/576i at 50 fps HDMI: 480p at 59.94, 60 fps HDMI: 480i at 59.94 fps |
| Audio Format | 16-Bit 48 kHz LPCM Audio |
| Video Standard Compliance | SMPTE 259M/274M/292M/296M/425M ITU -R BT.601 |
Power
| Battery Support | 1x Gold Mount |
| Power I/O | 1x LEMO 2-Pin (6.8 to 16 VDC) Input |
| Power Consumption | Device: (11 W) |
General
| Mounting | 1x 1/4"-20 Female |
| Dimensions | 5.67 x 3.58 x 1.02" / 14.4 x 9.1 x 2.6 cm |
Nimbus WiMi6220 Wireless 3G-SDI & HDMI H.264 Decoder/Receiver (Gold Mount) Specs
Wireless
| Wireless Range | 4921.26' / 1500 m (Line-of-Sight) |
| # of Channels | 12 (40 MHz) 24 (20 MHz) |
| Frequency Range | 5.15 to 5.25 GHz 5.25 to 5.35 GHz 5.47 to 5.72 GHz 5.72 to 5.85 GHz |
| Latency | 80 ms |
| Wi-Fi | 5 GHz Wi-Fi 5 (802.11ac) |
Interfaces
| Video I/O | 1x BNC (3G-SDI / HD-SDI / SD-SDI) Output 1x HDMI Output |
| Audio I/O | 1x 1/8" / 3.5 mm TRS Stereo |
| Other I/O | 1x RJ45 10/100 Ethernet 1x RJ45 RS-422 1x Unspecified Interface |
| Embedded Audio | SDI HDMI |
Format Support
| Video Format | SDI/BNC: 1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 1080PsF at 23.98, 24, 25, 29.97, 30 fps SDI/BNC: 1080i at 50, 59.94, 60 fps SDI/BNC: 720p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps SDI/BNC: 576i at 50 fps SDI/BNC: 480i at 59.94 fps HDMI: 1080p at 24, 30, 50, 59.94, 60 fps HDMI: 1080i/720p at 50, 59.94 fps HDMI: 576p/576i at 50 fps HDMI: 480p at 59.94, 60 fps HDMI: 480i at 59.94 fps |
| Audio Format | 16-Bit 48 kHz LPCM Audio |
| Video Standard Compliance | SMPTE 259M/274M/292M/296M/425M ITU -R BT.601 |
Power
| Battery Support | 1x Gold Mount |
| Power I/O | 1x LEMO 2-Pin (6.8 to 16 VDC) Input |
| Power Consumption | Device: (10 W) |
General
| Mounting | 1x 1/4"-20 Female |
| Dimensions | 5.67 x 3.58 x 1.02" / 14.4 x 9.1 x 2.6 cm |
In the Box
- 3 x Bar Antenna (6 dBi)
- RJ45 Adapter for RS-422
- Gold Mount Battery Plate
- 2-Year Manufacturer Warranty
- 3 x Bar Antenna (6 dBi)
- RJ45 Adapter for RS-422
- Gold Mount Battery Plate
- Nimbus DCA12M Mini 12 VDC Adapter for WiMi6220, WiMi5150A, and WiMi5200
- 2-Year Manufacturer Warranty
No posts found
