The RF Video XLD-5800/HP Wideband Microwave Link is used for 1 video or 2 audio signals with frequencies between 5.690 and 5.900 MHz. It consists of a 10W transmitter (XLD-5800/HP) with a digital display, a receiver with a digital display, and 2 directional antennas (PH-58). In case of a matching error between the antenna and the transmitter, the transmitter self-adjusts its settings. With high-gain antennas, the microwave link can cover distances of more than 30 km and is ideal for use in TV and film production.
Equipped with a built-in low noise amplifier, the XLD-5800/HP receiver amplifies weak signals and minimizes any loss during transmission. You can adjust the operating frequency of signals with the use of simple push buttons. The transmitters and receivers are housed in weather-resistant NEMAenclosures.
Used for 1 video or 2 audio signals with frequencies from 5.690 - 5.900 MHz
Consists of 10W transmitter (XLD-5800/HP) with a digital display, a receiver with a digital display, and 2 directional antennas (PH-58)
Self-adjustable transmitter for dealing with matching errors between the antenna and transmitter
Covers distances of more than 30 km with high-gain antennas
Ideal for use in TV and film production
Built-in low noise amplifier helps to amplify weak signals and minimize any loss during transmission
Adjustable signal operating frequency
Weather-resistant NEMAenclosures for transmitters and receivers
RF-Links XLD-5800/HP Specs
| Transmitter | |
| Operating Frequency | 5690-5900 MHz |
| Channels | All channels |
| Channel Selection | Internal/depends on model |
| DC Voltage | 12 V |
| RF Output Power | 5 W (10 W) |
| Minimum Required Voltage | 12 V |
| Battery Power | 12 V min |
| Frequency Stability | 0.005% |
| Video Distortion | 2% |
| Maximum Range | 20 miles + (32.2km +) |
| Video Format | , PAL |
| Current Consumption | 1.8 A (2.8 A) |
| Antenna | SMA/N |
| Impedance | 50 ohms |
| Video Connector | BNC |
| Video Level | 1 V |
| Video Impedance | 75 ohms |
| Audio Frequency Response | 20-16 kHz |
| Audio Input | 300 mV 10K |
| Audio Carrier Frequencies | 6 MHz |
| Operating Temperature | -40 ~ 167°F (-40 ~ 75°C) |
| Modulation | WFM |
| Dimensions | 7.5 x 11 x 3.5" (191 x 279 x 89mm) |
| Weight | 5 lbs (2.3kg) |
| Receiver | |
| Operating Frequency | 5690-5900 MHz |
| Channels | All channels |
| Channel Selection | Display |
| DC Voltage | 12 V |
| Sensitivity | - 92 dBm |
| Minimum Required Voltage | 12 V |
| Battery Power | 12 V |
| IF Frequency | 47 MHz |
| Video Distortion | 1% |
| IF Bandwidth | 20 MHz |
| Gain Flatness | 0.03% |
| Noise | <2% |
| Antenna | Directional |
| Impedance | 50 ohms |
| Video Connector | BNC |
| Video Level | 1 V |
| Video Impedance | 75 ohms |
| Image Rejection | N/A |
| Audio Input | 300 mV |
| Audio Output | 300 mV |
| Modulation | WFM |
| Antenna | SMA/N |
| Operating Temperature | -40 ~ 167°F (-40 ~ 75°C) |
| Dimensions | 7.5 x 11 x 3.5" (191 x 279 x 89mm) |
| Weight | 5 lbs (2.3kg) |
In the Box
- RF-Links XLD-5800/HP Wideband Microwave Link
- XLD-5800/HP Transmitter
- XLD-5800/HP Receiver
- 2-Year Manufacturer Warranty
No posts found
