Built around a high-performance processor and a new S35 3:2 CMOS image sensor, the MAVO mark2 6K S35 Digital Cinema Camera from Kinefinity is ready to work with the large variety of existing Super35-format lenses using the native KineMOUNT and the included active PL lens adapter. And with frame rates up to 6K 96 fps and 4K 112 fps, dual native 800/3200 ISOs, 14+ stops of dynamic range, and cleaner imaging, the MAVO mark2 S35 offers enhanced video capture in both standard and low-light settings.
Kinefinity MAVO S35 MKII Specs
| Lens Mount | ARRI PL |
| Sensor Resolution | Effective: 25 Megapixel (6144 x 4016) |
| Image Sensor | 24 x 16 mm (Super35) CMOS |
| Image Stabilization | No |
| ISO Sensitivity Range | 800 to 3200 |
| Internal Recording Modes | ProRes 422/ProRes 422 HQ/ProRes 422 Proxy/ProRes 422LT/ProRes 4444/ProRes 4444XQ 10/12-Bit 6144 x 4016 from 0.2 to 60.00 fps 6144 x 3240 from 0.2 to 75 fps 6144 x 2516 from 0.2 to 96 fps 5760 x 3240 from 0.2 to 75 fps 5120 x 2700 from 0.2 to 90 fps 5120 x 2160 from 0.2 to 112 fps 5760 x 3840 from 0.2 to 60.00 fps 5120 x 3840 from 0.2 to 60.00 fps 4864 x 3840 from 0.2 to 60.00 fps 4096 x 2160 from 0.2 to 75 fps 4096 x 1672 from 0.2 to 75 fps 3840 x 2460 from 0.2 to 60.00 fps 3840 x 2160 from 0.2 to 75 fps 3840 x 1576 from 0.2 to 96 fps 3456 x 2460 from 0.2 to 60.00 fps 3072 x 2460 from 0.2 to 60.00 fps |
| External Recording Modes | No |
| Media/Memory Card Slot | Single Slot: KineMAG Nano SSD |
| Video I/O | 2x Proprietary (Unspecified Signal) Monitor Output 1x BNC (3G-SDI) Output |
| Mobile App Compatible | Yes, Adapter Required (Included): Android & iOS App Name: Kinefinety App Functionality: Adjust Settings, Remote Control, View Live Feed |
| Battery Type | V-Mount |
Imaging
| Lens Mount | ARRI PL |
| Sensor Resolution | Effective: 25 Megapixel (6144 x 4016) |
| Image Sensor | 24 x 16 mm (Super35) CMOS |
| Image Stabilization | No |
| Built-In ND Filter | No |
| Internal Filter Holder | No |
| Capture Type | Video Only |
Exposure Control
| Shutter Type | Electronic Rolling Shutter |
| ISO Sensitivity Range | 800 to 3200 |
| Shutter Angle | 0.7 to 358° |
| Advertised Dynamic Range | 14 Stops |
Video Capture
| Internal Recording Modes | ProRes 422/ProRes 422 HQ/ProRes 422 Proxy/ProRes 422LT/ProRes 4444/ProRes 4444XQ 10/12-Bit 6144 x 4016 from 0.2 to 60.00 fps 6144 x 3240 from 0.2 to 75 fps 6144 x 2516 from 0.2 to 96 fps 5760 x 3240 from 0.2 to 75 fps 5120 x 2700 from 0.2 to 90 fps 5120 x 2160 from 0.2 to 112 fps 5760 x 3840 from 0.2 to 60.00 fps 5120 x 3840 from 0.2 to 60.00 fps 4864 x 3840 from 0.2 to 60.00 fps 4096 x 2160 from 0.2 to 75 fps 4096 x 1672 from 0.2 to 75 fps 3840 x 2460 from 0.2 to 60.00 fps 3840 x 2160 from 0.2 to 75 fps 3840 x 1576 from 0.2 to 96 fps 3456 x 2460 from 0.2 to 60.00 fps 3072 x 2460 from 0.2 to 60.00 fps |
| External Recording Modes | No |
| Recording Sensor Crop | Crops to Output Resolution in All Recording Modes |
| Fast-/Slow-Motion Support | Yes |
| Gamma Curve | KineLOG3, Rec709 |
| Built-In Microphone | Mono |
| Audio Recording | 2-Channel 24-Bit 48 kHz LPCM Audio |
| IP Streaming | No |
Interface
| Media/Memory Card Slot | Single Slot: KineMAG Nano SSD |
| Video I/O | 2x Proprietary (Unspecified Signal) Monitor Output 1x BNC (3G-SDI) Output |
| Audio I/O | 1x 1/8" / 3.5 mm TRS Stereo Microphone Input 2x XLR 3-Pin Input 1x 1/8" / 3.5 mm TRS Stereo Headphone Output |
| Power I/O | 1x LEMO 2-Pin (11 to 19VDC up to 3 A) Input |
| Other I/O | 1x LEMO 5-Pin (RS-232) Control 1x LEMO 5-Pin (Timecode) 1x 9-Pin (RS-422, Sync) 1x USB-C (Firmware) Input |
| Wireless | Wi-Fi Video Output, Control *Adapter Required |
| Mobile App Compatible | Yes, Adapter Required (Included): Android & iOS App Name: Kinefinety App Functionality: Adjust Settings, Remote Control, View Live Feed |
| Global Positioning (GPS, GLONASS, etc.) | No |
| Focus Type | Manual Focus Only |
Environmental
| Operating Temperature | 32 to 72°F / 0 to 40°C |
General
| Battery Type | V-Mount |
| Power Consumption | 23 W |
| Shoe Mount | No |
| Tripod Mounting Thread | 1x 1/4"-20 Female 2x 3/8"-16 Female |
| Accessory Mounting Thread | 4x 1/4"-20 |
| Material of Construction | Aluminum |
| Dimensions (W x H x D) | 4.9 x 4.2 x 4.2" / 124 x 107 x 106 mm (Without Protrusions) |
| Weight | 2.98 lb / 1.35 kg (Body Only) |
No posts found
