Datavideo PTC-150TWL PTZ Camera with HBT-11 HDBaseT Receiver (White)

Datavideo PTC-150TWL HD/SD-SDI HDBaseT PTZ Camera (No Receiver, White)

EAN:672255007358

The white PTC-150TL HD/SD HDBaseT PTZ Camera (No HDBaseT Receiver) from Datavideo captures up to 1080p HD video and features HDBaseT technology for remotely controlling the camera via Cat 6 or above cable. Configured specifically for use with the HS-1500T HDBaseT Production Switcher, the PTC-150TWL does not include an HDBaseT receiver.

PTC-150TL video capture functions include wide dynamic range, backlight compensation, and digital noise reduction for detailed imaging. Features include 30x optical zoom, 50 programmable presets, and an IR cut filter for optimal low-light performance. Adjust the camera to your choice of multiple mounting options with the help of the image mirror and rotation functions.

For multi-camera shoots, the built-in green/red tally light can be used to signal when the camera is active. Virtual studio applications benefit from the PTC-150TL s support for real-time position reporting on a per frame basis. The PTC-150TL camera supports Sony VISCA protocol for PTZ control using RS-422 interface over the unit s RJ45 port.

Features

• Capture up to 1080p HD video with wide dynamic range, and backlight compensation
• The 30x, 4.3 to 129mm, f/1.6 to 4.7 zoom lens captures detail from near or far positions
• HDBaseT compatibility enables cable video, power, control, and tally using a single Cat 6 cable, and separately available HDBaseT components
• Create up to 50 preset pan, tilt, and zoom position combinations
• An IR cut filter, and digital noise reduction enhances capture, even in low-light environments
• Auto/manual iris and white balance options enable individual calibration for multi-camera setups
• Built-in dual tally with red and green LEDs
• Compatible with the Datavideo RMC-180 camera control unit
• Day and night image-compensation functions
• Firmware updates via USB port

Datavideo HDBaseT to HDMI Receiver

EAN:672255007075

Use the HDBaseT to HDMI Receiver from Datavideo to convert an incoming HDBaseT signal from a PTZ camera and output to HDMI to connect it to a display or projector. The receiver supports up to 1080p video from up to 328 away over Cat 7 or 6 cable, and it also supports up to UHD 4K video from the optional HBT-10 transmitter from a shorter distance away.

The receiver can pass through DVIP control as well as RS-232 and RS-422 serial control using its serial terminal block interface. A power adapter and power cable comes in the box as well as a terminal block to RJ45 adapter for serial control extension. The receiver also supports PoE/PoH (Power-over-Ethernet/HDBaseT) and is compatible with select Datavideo PTZ cameras to provide power over the Cat 7 or 6 cable.

PoE PTZ Camera Compatibility

To provide power over HDBaseT to PTC-140T and PTC-150T