ikan OTTICA 2 x NDI|HX 30x PTZ Cameras and V2 IP Controller Bundle (Black)

ikan OTTICA Overview

Add a dual camera setup with remote control to your meeting room, classroom, or house of worship with this OTTICA 2 x NDI|HX 30x PTZ Cameras and IP Controller Bundle from ikan. The bundle includes two black OTTICA NDI|HX/HDMI/SDI 30x PTZ cameras and the OTTICA V2 IP camera controller. The fully licensed NDI|HX cameras can record 1080p HDMI/SDI video. Powered by IP, the controller features joystick controls and four LED screens.

ikan OTTICA NDI HX PTZ Camera with 30x Optical Zoom (Black)

Add a versatile NDI|HX PTZ camera to your meeting room, house of worship, or studio with this black OTTICA NDI|HX PTZ Camera with 30x Optical Zoom from ikan. Boasting a 1/2.8" CMOS sensor, the OTTICA is fully licensed for NewTek s NDI|HX communication, which enables the utilization of NDI protocols with less bandwidth than NDI.

A 4.3 to 129mm lens provides a 30x optical zoom with a viewing angle ranging from 2.34 to 65.1° . With a color temperature range from 2400 to 7100K, the OTTICA captures vibrant, razor-sharp images that are supported by its 2D/3D noise-reduction capability. Video output occurs via HDMI, SDI, and RJ45 NDI connectivity, employing resolutions up to 1080p60. A 3.5mm audio input makes it possible for you to embed analog audio with the video outputs, and you can power the camera using the included power adapter or via PoE (Power over Ethernet) over the RJ45 port.

Employing a virtually silent motor during pan, tilt, and zoom operation, the OTTICA supports RS-232 and RS-485 serial connectivity, which when used with a separately available controller, allows you to store up to 255 presets or up to 10 presets when using the included IR remote control. Also in the box, are a cascade cable for daisy-chaining RS-232 serial control, an RS-232 cable, an RS-485 connector, a power adapter, and a wall-mount bracket.

1/2.8" CMOS sensor captures up to 1080p60 video

HDMI, SDI, RJ45 Ethernet (NDI) video outputs

Fully licensed NDI|HX support

PoE (Power-over-Ethernet) support

Silent PTZ motor mechanism

4.3 to 129mm varifocal lens with 30x zoom and a 2.34 to 65.1° field of view

2D/3D noise reduction

Control PTZ using included IR remote control and PELCO-D, PELCO-P, and VISCA serial protocols

Powers with power adapter or via PoE

One 1/4" -20 mounting thread, wall mount bracket included

Cascade connector included to support serial control of multiple cameras from one controller

EAN: 847983034277

ikan OTTICA V2 IP PTZ Camera Controller

The OTTICA V2 IP PTZ Camera Controller from ikan features four LED screens, various controls, and is compatible with any PTZ camera that uses IP VISCA, serial port VISCA, and Pelco-D/P protocols. It can be set up to control up to 5 cameras over Ethernet, DB-9 RS-232, and 4-pin Phoenix RS-422 ports simultaneously. Three dedicated knobs control camera parameters like iris, zoom, and gain. Camera presets have been streamlined for intuitive configuration. The controller comes with a Phoenix 4-pin terminal and a power adapter for easy integration into your broadcast setup.

Interface

The OTTICA V2 has an RJ45 port, DB-9 RS-232 port, and a 4-pin RS-422 port for both analog and IP control protocols. Other connectors include a 12V barrel power input and a micro USB connector for firmware updates.

Precise Controls

A 2-axis joystick on the OTTICA V2 facilitates smooth control of pan and tilt movements. A zoom rocker easily zooms your camera in or out. Two separate knobs control the focus and PTZ/focus speed. Select from 7 different speed levels for PTZ movements. Reset your camera parameters to the default positions by holding down the function button.

Quick Adjustment

Three dedicated side knobs and corresponding LED screens can adjust different parameters depending on the operating mode you are in. Enter AE mode to change the auto exposure mode of your connected camera. The side knobs will then allow you to adjust shutter, iris, and exposure compensation. When in WB mode, change the white balance of your camera by adjusting the knobs for color temperature, red gain, and blue gain. Other possible parameters controlled by the knobs include brightness, focus, and gain limit.

Preset Positions

Creating camera presets is intuitive, simply press and hold one of the preset buttons. When you wish to recall the preset, tap the corresponding button and your camera will adjust accordingly. The OTTICA V2 is capable of programming 5 presets or a maximum of 10 presets for selection per channel.