ikan OTTICA 2 x NDI|HX PTZ Cameras and IP Controller Bundle

Add a dual camera setup with remote control to your meeting room, classroom, or house of worship with this OTTICA 2 x NDI|HX PTZ Cameras and IP Controller Bundle from ikan. The bundle includes two OTTICA NDI|HX/HDMI/SDI PTZ cameras and the OTTICA IP camera controller.

Each OTTICA camera captures up to 1080p60 video, features a 20x optical zoom, PoE, and audio input, and it can output video via SDI, HDMI, or via a local NDI network using the high-quality, fully licensed NDI|HX protocol. The controller allows you to control up to 255 cameras via IP over a local network or via serial control using VISCA, VISCA-over-IP, Pelco-P, or Pelco-D protocols via RS-232 or RS-422 ports.

Read more below about the items in this kit.

ikan OTTICA NDI HX PTZ Video Camera with 20x Optical Zoom (Black)

Add a conference camera to your meeting room with this black OTTICA NDI|HX PTZ Video Camera with 20x Optical Zoom from ikan. The camera features a 1/2.8" CMOS sensor and supports output up to a 1080p60 simultaneously over HDMI, SDI, and is fully licensed for NDI|HX communication. NewTek s NDI|HX allows you to utilize NDI protocols using less bandwidth than NDI.

The OTTICA features a 20x zoom with a 5.5 to 110mm wide-angle lens, which provides a range with a viewing angle of 3.3 to 54.7° , respectively. It supports 2400 to 7100K color temperature and 2D/3D noise reduction. There are HDMI, SDI, and RJ45 NDI video outputs that support up to 1080p60 video. It also includes a 3.5mm audio line input for embedding analog audio with your output. The camera can be powered via the included power adapter or via PoE (Power-over-Ethernet) over the RJ45 NDI port.

The pan, tilt, and zoom functions operate with virtual silence. It supports up to 255 presets using its RS-232 and RS-485 serial connections with a separately available controller, and it supports up to 10 presets using the included IR remote control. The camera also includes a wall-mount bracket, RS-232 cable, RS-485 terminal connector, and a cascade cable that facilitates daisy-chaining your RS-232 serial control if you use multiple cameras.

1/2.8" CMOS sensor that captures up to 1080p60 video

HDMI, SDI, RJ45 Ethernet (NDI) video outputs

Fully licensed NDI|HX support

PoE (Power-over-Ethernet) support

Silent PTZ motor mechanism

5.5 to 110mm varifocal lens with 20x zoom and a 3.3 to 54.7° field of view

2D/3D noise reduction

Control PTZ using included IR remote control and PELCO-D, PELCO-P, and VISCA serial protocols

Powers with power adapter or via PoE

One 1/4" -20 mounting thread, wall mount included

Cascade connector included to support serial control of multiple cameras from one controller

EAN: 847983031610

ikan OTTICA IP PTZ Camera Controller

The OTTICA IP PTZ Camera Controller from ikan is compatible with any PTZ camera that uses the ONVIF, IP VISCA, serial port VISCA, and Pelco-D/P protocols. It can be set up over Ethernet, 9-pin RS-232, and 5-pin Phoenix RS-422 ports to control up to 255 cameras. The maximum communication distance is 3937 over 0.5mm twisted-pair cabling.

Key Features

Precise Controls

The OTTICA controller features a joystick for smooth control of pan, tilt, and zoom. The controller also allows precision control over variable PTZ speed, red and blue gain, focus, iris, onscreen display, white balance, fast camera switching, quick-set camera parameters and presets, and many other features. Two programmable function buttons (F1 and F2) are customizable in IP VISCA and VISCA protocols.

Metal and Silicone Design with LCD

The housing is designed of metal and the buttons are made of firm silicone. An industrial-grade blue LCD screen displays fine and clear characters. The buttons provide sound prompts for a more interactive experience.

Communication BPS

2400, 4800, 9600, 19,200, 38,400, and 115,200 bps

Control Protocol

IP VISCA, VISCA, Pelco-D, Pelco-P, and ONVIF

Data Output Interface

Protocol Network: ONVIF, VISCA

Control Buttons

Autofocus

Sets the camera into autofocus mode. It will light up when the camera is in manual focus mode.

AE Auto (Auto Aperture)

Sets the camera into automatic aperture mode. It will light up when the camera is in manual aperture mode.

Camera OSD

Call/Close the Camera OSD.

Home

Returns the camera to the home position if the Camera OSD is off. When the Camera OSD is on, the Home button confirms the function of the Camera OSD.

F1 and F2

Custom function buttons (for VISCA and IP VISCA modes).

Setup

The local settings button shows and modifies local settings. Navigate menus using the joystick.

Search

Search for all available devices with ONVIF protocol in the LAN (only in ONVIF mode).

Inquire

Check added devices.

WBC Mode (Auto White Balance)

Sets the camera into auto white balance mode. The button will light up when the camera is in manual white balance mode.

CAM1 to CAM4

Quickly switch to 1 to 4 cameras (ONVIF/IP VISCA), or address code 1 to 4 devices (VISCA/Pelco).

Preset

Short presses allow you to set presets. Long presses delete presets. Use the number keys and the Enter button when setting or deleting presets.

Call

Use the number keys and Enter button to move the camera to a preset.

IP

Manually adds network devices (only in ONVIF and IP VISCA modes). Use the Enter button to confirm each step of the setup.

Cam

In IP VISCA and ONVIF modes, it will quickly switch to the camera number-bound device when adding a device. In VISCA and Pelco modes, it will switch to the address code when entering a certain address.

0 to 9 Number Keys

Keys 2, 4, 6, and 8 additionally function as directional keys, which can control pan/tilt rotation and Camera OSD.

EAN: 847983017065