ikan OTTICA 3 x NDI|HX 20x PTZ Cameras and V2 IP Controller Bundle (White)

ikan OTTICA Overview

Add a three camera setup with remote control to your meeting room, classroom, or house of worship with this OTTICA 3 x NDI|HX 20x PTZ Cameras and IP Controller Bundle from ikan. The bundle includes three white OTTICA NDI|HX/HDMI/SDI 20x PTZ cameras and the OTTICA V2 IP camera controller. The fully licensed NDI|HX cameras can record 1080p HDMI/SDI video. Powered by IP, the controller features joystick controls and four LED screens.

ikan OTTICA NDI HX PTZ Video Camera with 20x Optical Zoom (White)

Add a conference camera to your meeting room with this white OTTICA NDI|HX PTZ Video Camera with 20x Optical Zoom from ikan. The camera features a 1/2.8" CMOS sensor and supports output up to a 1080p60 simultaneously over HDMI, SDI, and is fully licensed for NDI|HX communication. NewTek s NDI|HX allows you to utilize NDI protocols using less bandwidth than NDI.

The OTTICA features a 20x zoom with a 5.5 to 110mm wide-angle lens, which provides a range with a viewing angle of 3.3 to 54.7° , respectively. It supports 2400 to 7100K color temperature and 2D/3D noise reduction. There are HDMI, SDI, and RJ45 NDI video outputs that support up to 1080p60 video. It also includes a 3.5mm audio line input for embedding analog audio with your output. The camera can be powered via the included power adapter or via PoE (Power-over-Ethernet) over the RJ45 NDI port.

The pan, tilt, and zoom functions operate with virtual silence. It supports up to 255 presets using its RS-232 and RS-485 serial connections with a separately available controller, and it supports up to 10 presets using the included IR remote control. The camera also includes a wall-mount bracket, RS-232 cable, RS-485 terminal connector, and a cascade cable that facilitates daisy-chaining your RS-232 serial control if you use multiple cameras.

1/2.8" CMOS sensor that captures up to 1080p60 video

HDMI, SDI, RJ45 Ethernet (NDI) video outputs

Fully licensed NDI|HX support

PoE (Power-over-Ethernet) support

Silent PTZ motor mechanism

5.5 to 110mm varifocal lens with 20x zoom and a 3.3 to 54.7° field of view

2D/3D noise reduction

Control PTZ using included IR remote control and PELCO-D, PELCO-P, and VISCA serial protocols

Powers with power adapter or via PoE

One 1/4" -20 mounting thread, wall mount included

Cascade connector included to support serial control of multiple cameras from one controller

EAN: 847983033379

ikan OTTICA V2 IP PTZ Camera Controller

The OTTICA V2 IP PTZ Camera Controller from ikan features four LED screens, various controls, and is compatible with any PTZ camera that uses IP VISCA, serial port VISCA, and Pelco-D/P protocols. It can be set up to control up to 5 cameras over Ethernet, DB-9 RS-232, and 4-pin Phoenix RS-422 ports simultaneously. Three dedicated knobs control camera parameters like iris, zoom, and gain. Camera presets have been streamlined for intuitive configuration. The controller comes with a Phoenix 4-pin terminal and a power adapter for easy integration into your broadcast setup.

Interface

The OTTICA V2 has an RJ45 port, DB-9 RS-232 port, and a 4-pin RS-422 port for both analog and IP control protocols. Other connectors include a 12V barrel power input and a micro USB connector for firmware updates.

Precise Controls

A 2-axis joystick on the OTTICA V2 facilitates smooth control of pan and tilt movements. A zoom rocker easily zooms your camera in or out. Two separate knobs control the focus and PTZ/focus speed. Select from 7 different speed levels for PTZ movements. Reset your camera parameters to the default positions by holding down the function button.

Quick Adjustment

Three dedicated side knobs and corresponding LED screens can adjust different parameters depending on the operating mode you are in. Enter AE mode to change the auto exposure mode of your connected camera. The side knobs will then allow you to adjust shutter, iris, and exposure compensation. When in WB mode, change the white balance of your camera by adjusting the knobs for color temperature, red gain, and blue gain. Other possible parameters controlled by the knobs include brightness, focus, and gain limit.

Preset Positions

Creating camera presets is intuitive, simply press and hold one of the preset buttons. When you wish to recall the preset, tap the corresponding button and your camera will adjust accordingly. The OTTICA V2 is capable of programming 5 presets or a maximum of 10 presets for selection per channel.