JVC KY-PZ100 Robotic PTZ Camera with NDI Converter Kit (Black)

Set up a high-resolution PTZ camera on your existing NDI network with this JVC KY-PZ100 Robotic PTZ Camera with NDI Converter Kit put together. The kit includes one black KY-PZ100 Robotic PTZ camera and an SDI to Full NDI converter.

The camera features up to 1080p59.94 video capture, 3G-SDI/HDMI outputs, IP streaming output, up to 100 presets, PoE, record using an internal microSDXC/SDHC slot, and RS-232/-422 serial control. The camera can output video to the converter which converts it to NDI protocol video for use on a standard NDI network. The converter also supports PoE and it can be mounted using a 1/4" -20 thread.

JVC KY-PZ100 Robotic PTZ Network Video Production Camera (Black)

This black KY-PZ100 Robotic PTZ Network Video Production Camera from JVC can be used as a single camera or part of a multi-camera shoot. It features a 1/2.8" sensor and captures 1080i/p and 720p footage to a microSDHC/SDXC card slot (microSD card not included). The PTZ camera features 3G-SDI and HDMI outputs and can simultaneously output video while streaming over its Ethernet port or an optional USB Wi-Fi adapter or LTE modem.

The KY-PZ100 supports RS-232C, RS-422 control signals and IP control via its RJ45 connector (Ethernet port). You can program over 100 presets and positions into the camera, which enables you to pre-plan your show. The camera can be mounted on either a tripod or ceiling, and with its POE capability you don t need to worry about running an AC power cord.

Wireless Streaming

• The camera features a built-in USB host that allows you to attach a USB Wi-Fi or LTE adapter and stream
• The camera supports streaming with SMPTE 2022 forward error correction
• Advanced Zixi reliable communication with ARQ, FEC, and adaptive bitrate control
• Low-latency streaming
• 1/2.8" CMOS sensor (2.2 million pixels)
• 30x optical zoom ratio (4.3-129mm, f/1.6 to 4.7)
• Fast f/1.6-4.7 maximum aperture for excellent low light
• LoLux mode (down to 0.01 lux)
• Robotic pan, tilt, and zoom
• Full HD 1080p, 1080i, 720p video
• 3G-SDI and HDMI digital outputs
• 2-channel audio (or 1 channel balanced audio with phantom power)
• USB host connection for Wi-Fi or 4G LTE adapter
• LAN connector supports Power over Ethernet
• MicroSDHC/SDXC memory card recording
• Remote control via RS-232C / RS-422, or via IP controller
• Can memorize over 100 preset settings and positions
• Can be mounted upside-down or right-side-up

EAN: 046838075407

JVC SDI to Full NDI Converter

Encode SDI video output from a JVC camera to high-bitrate NDI format with this compact SDI to Full NDI Converter from JVC. The plug-and-play converter features an SDI input, an SDI loop output for local monitoring, and an RJ45 Ethernet port that supports full-NDI video output and PoE (Power-over-Ethernet).

The full-NDI support allows you to output high-resolution, zero-latency video up to 2048 x 1080p60 with high bitrate up to 100 Mb/s to preserve image quality. The unit also features LED status lights and an 8-pin mini-DIN to allow tally and PTZ control pass-through from a unit such as the JVC RM-LP100 PTZ controller. The converter is powered using either PoE or with the USB Type-B input, which can also be used for data transfer. An SD card slot is used for firmware updates, and the 1/4" -20 thread can be used to mount the converter onto a console or rig.

Key Features

Plug-and-play SDI-to-NDI converter

Preserves image quality with up to 100 Mb/s high bitrate

One SDI input, one SDI loop output, one NDI/RJ45 Gigabit Ethernet port

8-pin mini-DIN connector for PTZ control pass-through for controllers such as the JVC RM-LP100 PTZ controller

Supports video resolutions up to 2048 x 1080p60

USB 2.0 Type-B connector for power input and data transfer

SD card slot for firmware updates

Zero latency with full NDI

Power-over-Ethernet (PoE) support via Ethernet

LED status indicators and tally support

1/4" -20 mounting thread

EAN: 814395021171