MuxLab MuxStream Multi-Camera Live Streaming Solution

MuxLab MuxStream 1080p HDMI/IP PTZ Streaming Camera with 12x Optical Zoom

EAN: 627699009307

Add a standalone video conferencing device to your conference room, lecture hall, event space, or house of worship with this MuxStream 1080p HDMI/IP PTZ Streaming Camera with 12x Optical Zoom from MuxLab. The camera features a high-quality HD 1/2.7 2.07MP CMOS sensor, 12x optical zoom, 16x digital zoom, wide 72.5° angle of view, noise reduction, analog audio input, and serial control capability.

The PTZ camera allows you to capture up to 1080p60 video that it can output via HDMI to a video switcher or via IP to a computer for optional streaming to popular internet sites, using low-latency H.265/H.264 video codecs. The free-to-download MuxStream control app installs onto your Android or iOS tablet or Windows system, allowing you to set up and control the PTZ camera.

The sensor features 2D/3D noise reduction that reduces image noise for a crisp, clean image in low-light. Its quiet motor allows you to pan and tilt smoothly using the included IR remote, via IP connectivity, or via an optional serial controller, using RS-232 serial protocols such as VISCA, Pelco-P, and Pelco-D. A power adapter, power cord, and RS-232 cable are also included with the camera.

Maximum resolution of 1920 x 1080p60

Panasonic 1/2.7 2.07MP high-quality HD CMOS sensor

72.5° wide-angle high-quality lens

HDMI and dual IP video streams using H.264/H.265 codec

3.5mm analog stereo audio input

12x optical zoom and up to 16x digital zoom

High SNR (signal-to-noise ratio) CMOS sensor combined with 2D& 3D noise reduction algorithm, effectively reducing noise even in low light

Supports AAC audio encoding for better sound quality at a lower bandwidth

Designed with worm gear drive for reliable and accurate movement

May be remotely controlled via RS-232 serial via VISCA and Pelco-P/D protocols or via IP

MuxLab 4K HDMI 4x1 Switcher with Audio Extraction

Switch between four HDMI sources such as a computer, laptop, DVD, or Blu-ray to one HDMI display such as a projector, monitor, TV, or another destination with the 4K HDMI 4x1 Switcher with Audio Extraction from Muxlab. Supporting up to UHD 4K60 resolution, this switcher is equipped with four HDMI inputs, two RCA audio outputs which extract LPCM 7.1, Dolby TrueHD, Digital Plus, and DTS-HD audio to digital S/PDIF TOSLINK and LPCM to analog 2CH audio, and one HDMI output.

The 3.5mm stereo, RCA coaxial, and TOSLINK optical connectors allow audio to be de-embedded from the sources and output to audio equipment. The switcher supports up to 12-bit Deep Color, uncompressed HD audio, pass-through of LPCM 7.1, Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master audio. The switching and audio mode selections are controlled via buttons on the front of the unit or with the included IR remote control.

Switches between four Ultra HD sources to one Ultra HD display

Supports resolutions up to UHD 4K (3840 x 2160 at 30 Hz) and 1080p Full HD

Supports 12-bit Deep Color, 3D

Extracts audio to S/PDIF TOSLINK, coaxial, and 3.5mm stereo jack

Extracts LPCM to analog audio 3.5mm stereo jack

Supports LPCM 7.1, Dolby TrueHD, Dolby

Digital Plus and DTS-HD master audio

Push-button selects between the four HDMI inputs

IR remote control

Suitable for commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems, and medical information systems

MuxLab 500764-TX HDMI over IP 4K/60 H.264/H.265 PoE Transmitter

EAN: 627699907641

The MuxLab 500764-TX allows you to transmit up to a UHD 4K/60 HDMI signal up to 328 over a single Cat 5e/6 cable. It s compatible with the MuxLab 500762-RX receiver and can be set up in various combinations with Ethernet switches, network controllers, and routers. It lets you achieve point-to-point, point-to-multipoint, and multipoint-to-multipoint matrix, video wall, and multiview configurations. Depending on network bandwidth, hundreds of devices can be incorporated and managed using the optional MuxLab 500811 or 500812 Pro Digital Network Controller, or via the MuxControl iOS/Android app or 3rd-party apps. Additionally, RS-232 and directional IR inputs allow for remote control of end-point devices.

With H.264/H.265 codec support, the transmitter allows streaming over a local network or over the Internet for worldwide distribution in a low-bandwidth workflow. In low-latency mode using the H.265 codec, the delay is only 200ms. Alternatively, the MJPG video codec is also supported for low-latency transmission. Featuring support for Power-over-Ethernet (PD), the transmitter can be powered by a PoE (PSE) Ethernet switch, but it also supports the optional MuxLab 500993 power supply.

• Compatible with the 500762-RX receiver can be set up with hundreds of devices in various configurations for digital signage, medical information systems, A/V streaming, commercial and residential AV systems, boardrooms, and more
• Transmit up to UHD 4K/60 up to 328 over Cat 5e/6
• HDMI input HDMI and 2-channel audio loopout
• RS-232 and directional IR inputs
• H.264/H.265 codec support 200ms latency in H.265
• Low-latency MJPG codec support
• Multicast, RTSP, RTMP, HLS, FLV, and TS support
• Can be powered over PoE from an Ethernet switch or via the optional MuxLab 500993 AC power supply