Using the technology of both a PTZ cam and A/V interface receiver, the Vaddio RoboFLIP 30 HDBT OneLINK Bridge System is ideal for capturing events or videoconferencing applications. The RoboFLIP HDBT camera fully rotates into its enclosure when in standby mode which allows full assurance that video feeds are not active. A single RJ45 port provides PoE++, video control, and network connection to the camera and the included bridge A/V interface simplifies installation by extending power, video, and control over a single cable while offering integration with external audio equipment, video displays, and USB conferencing setups.
Vaddio RoboFLIP 30 HDBT PTZ Ceiling Camera (White) Specs
Imaging
| Image Sensor | 1/2.5"-Type CMOS |
| Sensor Resolution | Actual: 8.57 Megapixel Effective: 8.51 Megapixel |
| Built-In ND Filter | None |
| Focus Control | Autofocus Manual Focus |
Exposure Control
| Shutter Type | Electronic Rolling Shutter |
| Gain | 0 to 33 dB |
| Precise Scan Rate Control | No |
| Signal-to-Noise Ratio | 50 dB |
| Minimum Illumination | 1.6 Lux |
| Flip / Mirror Support | Image Flip |
| White Balance | Presets: ATW, Auto, Indoors, Manual, One Push, Outdoors |
Lens
| Focal Length | 4.4 to 88.4mm |
| Optical Zoom Ratio | 20x |
| Max Digital Zoom | 30x |
| Field of View | Horizontal: 70.2 to 3.4° |
| Maximum Aperture | f/2 to 3.8 |
| Minimum Focus Distance | Wide: 3.1" / 8.0 cm Telephoto: 31.5" / 80.0 cm |
Video Capture
| External Recording Modes | RJ45 1920 x 1080p at 25/29.97/30.00/50/59.94/60.00 fps 1920 x 1080i at 50/59.94/60.00 fps 1280 x 720 at 50/59.94/60.00 fps |
| Broadcast Output | |
| IP Streaming | H.264, RTMP, RTSP 1920 x 1080 at 59.94p |
Control
| Presets | 16 |
| Move Speed | Pan: 0.4 to 120°/sec Tilt: 0.4 to 120°/sec |
| Movement Range | Pan: 320° (-160 to 160°) Tilt: 120° (-30 to 90°) |
| Tally Light | No |
| Supported Control Protocols | IR RS-232 |
| Max Cable Length | 230` / 70.1 m (Cat 5e) 328` / 100 m (Cat 6) |
Interface
| Video I/O | 1 x RJ45 (HDBaseT) Output |
| Other I/O | 1 x RJ45 Control Input (Shared with Power Input, Video Output) |
Power
| PoE Support | PoE++ 802.3bt |
Environmental
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Storage Temperature | 32 to 104°F / 0 to 40°C |
| Operating Humidity | 20 to 80% (Non-Condensing) |
| Storage Humidity | 20 to 80% (Non-Condensing) |
General
| Certifications | CE, FCC *as per Manufacturer |
| Dimensions (W x H x D) | 16 x 9.3 x 16" / 40.6 x 23.6 x 40.6 cm |
| Weight | 15 lb / 6.8 kg |
Vaddio OneLINK Bridge A/V Interface Receiver for HDBaseT Cameras (North America) Specs
General
| Compatibility | Vaddio RoboSHOT 12E / RoboSHOT 30E HDBT / RoboSHOT 20 UHD / RoboSHOT 40 UHD / RoboSHOT IW / DocCAM 20 HDBT |
Inputs / Outputs
| USB I/O | 1 x USB-B 3.0 / 3.1/3.2 Gen 1 Female Output |
| Video I/O | 1 x HDMI Output 1 x BNC (3G-SDI) Output |
| Audio I/O | 2 x Block 3-Pin Line/Mic Input 2 x Block 3-Pin Line/Speaker Output |
Power
| Power Source | AC Input |
| DC Input Power | 48 VDC at 1.36 A |
| Certifications | CE, FCC, TAA, UL *as per Manufacturer |
| Operating Temperature | 32 to 72°F / 0 to 40°C |
| Operating Humidity | 15 to 80% (Non-Condensing) |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Storage Humidity | 15 to 80% (Non-Condensing) |
Physical
| Dimensions | 8.4 x 6 x 1.7" / 21.3 x 15.2 x 4.4 cm |
| Weight | 3.3 lb / 1.5 kg |
Packaging Info
| Package Weight | 3.43 lb |
| Box Dimensions (LxWxH) | 12.3 x 9.3 x 3.2" |
In the Box
- White Trim Ring with IR Receiver and Courtesy Light Button
- 3 x Mounting Screw
- Tile Support Brace
- IR Remote
- 2-Year Manufacturer Warranty
- Power Supply
- 4 x 3-Position 3.5mm Phoenix Plug
- USB Cable (6`)
- RS-232 Adapter
- 2-Year Manufacturer Warranty
No posts found
