Using the technology of both a PTZ cam and HDMI interface system, the Vaddio RoboFLIP 30 HDBT OneLINK HDMI Extension System is ideal for capturing events or videoconferencing applications. The RoboFLIP HDBT camera fully rotates into its enclosure when in standby mode, which allows full assurance that video feeds are not active. A single RJ45 port provides PoE++, video control, and network connection to the camera and the included HDMI extension system simplifies installation by extending power, video, and control over a single cable.
Vaddio RoboFLIP 30 HDBT PTZ Ceiling Camera (White)
Minimalistic design with a " flipping" function and high-definition video performance make the Vaddio RoboFLIP 30 HDBT Camera ideal for capturing events or videoconferencing applications in which knowledge of video status is crucial. This ceiling mount, recessed camera fully rotates into its enclosure when in standby mode, which allows full assurance that video feeds are not active. Industry-leading Tri-Synchronous Motion technology allows the camera to silently rotate for ultra-smooth pan, tilt, and zoom up to 30x.
A single RJ45 port provides PoE++, video control, and network connection to the camera. Control for the camera can be achieved through Telnet, RS-232, or the included IR remote. Users can adjust 16 stored PTZ presets, color, white balance, focus, and access system diagnostic logs, streaming settings, and more through a modern web-based interface.
Key Features
Smooth, silent BDLC direct-drive motors for precise pan and tilt movements up to 120° per second
Simultaneous HDBaseT output up to 1080p60 and IP (H.264) output up to 1080p30
Control through Telnet, serial RS-232, or IR remote
Full administrative control via web interface manage remotely while monitoring the stream separately
Vaddio OneLINK HDMI Extension System for HDBaseT Cameras
The Vaddio OneLINK HDMI Extension System for HDBaseT Cameras is an interface that allows you to power, receive HDMI video from, and control your compatible HDBT camera using a single Ethernet cable up to 328 long. The interface connects to your network for control, or you can use an RS-232 controller (not included) instead. HDMI video, up to 1080p60, is transmitted from your HDBT compatible camera to the OneLINK interface, from where it is available over a standard HDMI port.
- Video, power, network, and control on a single Cat5e (or better) cable
- Supports cable runs up to 328
- Works with RoboSHOT UHD HDBaseT cameras
- Bidirectional control via Ethernet and RS-232
- Transmits and receives HDMI video up to 1080p60
EAN: 840077500832
Vaddio RoboFLIP 30 HDBT PTZ Ceiling Camera (White) Specs
Imaging
| Image Sensor | 1/2.5"-Type CMOS |
| Sensor Resolution | Actual: 8.57 Megapixel Effective: 8.51 Megapixel |
| Built-In ND Filter | None |
| Focus Control | Autofocus Manual Focus |
Exposure Control
| Shutter Type | Electronic Rolling Shutter |
| Gain | 0 to 33 dB |
| Precise Scan Rate Control | No |
| Signal-to-Noise Ratio | 50 dB |
| Minimum Illumination | 1.6 Lux |
| Flip / Mirror Support | Image Flip |
| White Balance | Presets: ATW, Auto, Indoors, Manual, One Push, Outdoors |
Lens
| Focal Length | 4.4 to 88.4mm |
| Optical Zoom Ratio | 20x |
| Max Digital Zoom | 30x |
| Field of View | Horizontal: 70.2 to 3.4° |
| Maximum Aperture | f/2 to 3.8 |
| Minimum Focus Distance | Wide: 3.1" / 8.0 cm Telephoto: 31.5" / 80.0 cm |
Video Capture
| External Recording Modes | RJ45 1920 x 1080p at 25/29.97/30.00/50/59.94/60.00 fps 1920 x 1080i at 50/59.94/60.00 fps 1280 x 720 at 50/59.94/60.00 fps |
| Broadcast Output | |
| IP Streaming | H.264, RTMP, RTSP 1920 x 1080 at 59.94p |
Control
| Presets | 16 |
| Move Speed | Pan: 0.4 to 120°/sec Tilt: 0.4 to 120°/sec |
| Movement Range | Pan: 320° (-160 to 160°) Tilt: 120° (-30 to 90°) |
| Tally Light | No |
| Supported Control Protocols | IR RS-232 |
| Max Cable Length | 230` / 70.1 m (Cat 5e) 328` / 100 m (Cat 6) |
Interface
| Video I/O | 1 x RJ45 (HDBaseT) Output |
| Other I/O | 1 x RJ45 Control Input (Shared with Power Input, Video Output) |
Power
| PoE Support | PoE++ 802.3bt |
Environmental
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Storage Temperature | 32 to 104°F / 0 to 40°C |
| Operating Humidity | 20 to 80% (Non-Condensing) |
| Storage Humidity | 20 to 80% (Non-Condensing) |
General
| Certifications | CE, FCC *as per Manufacturer |
| Dimensions (W x H x D) | 16 x 9.3 x 16" / 40.6 x 23.6 x 40.6 cm |
| Weight | 15 lb / 6.8 kg |
Vaddio OneLINK HDMI Extension System for HDBaseT Cameras Specs
| Cable Run | Max: 328` / 100 m |
| Power | Input: 48 VDC, 1.36 A To Camera: 12 VDC, 3 A |
| Environmental | Operating/Storage Temperature: 32 to 104°F / 0 to 40°C Humidity: 20 to 80% RH (non-condensing) |
| Dimensions | 1.73 x 8.39 x 5.98" / 44 x 213 x 152 mm |
| Weight | 1.55 lb / 0.7 kg |
Packaging Info
| Package Weight | 3.35 lb |
| Box Dimensions (LxWxH) | 12.5 x 9 x 3.3" |
In the Box
- White Trim Ring with IR Receiver and Courtesy Light Button
- 3 x Mounting Screw
- Tile Support Brace
- IR Remote
- 2-Year Manufacturer Warranty
- 48 VDC, 1.36A Switching Power Supply
- AC Cord Set
- EZCamera RS-232 Control Adapter
- 2-Year Manufacturer Warranty
No posts found
