Vaddio RoboSHOT 20 UHD OneLINK HDMI System (White)

Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (White)

EAN: 840077503765

This white RoboSHOT 20 UHD Ultra High-Definition PTZ Camera from Vaddio is suitable for use in distance learning, corporate, and house of worship. It captures UHD 4K (3840 x 2160) at 30p from a single 1/2.3 type Exmor R sensor. Featuring a 12x optical zoom, with a 1.67x digital zoom for a 20x total zoom range, the camera has a 74° angle of view at wide, with a 4.8° angle of view when zoomed in all the way.

The camera simultaneously outputs HDMI, HDBaseT, 3G-SDI, and IP streaming, so there is no concern about selecting an output port. You can control the camera from a networked computer via the Ethernet port, and an included IR remote provides local control. You can tell at a glance the status of the unit thanks to a built-in LED that changes color to indicate the state of the camera.

The camera s outputs are active at all times, so there is no need to select one output over another. This also allows you to output to more than one display device or recorder at the same time. The built-in IP streaming simplifies streaming your video over a network.

HDBaseT provides power over an Ethernet cable, so you are not limited where you can mount the camera by needing an AC outlet. You can mount this camera wherever you can run an Ethernet cable. Please note that you will need a network that supports HDBaseT to take advantage of this feature.

You can control the camera via the included IR remote commander, the RS-232 port, or the HDBaseT port.

The camera features built-in web based interface for control via your browser.

Status Indicator LED

• Purple: boot-up and Standby modes
• Blue: normal operation and is a power on, ready condition
• Blinking blue: the camera has received IR from the remote or other IR source
• Red: tally function shows that the camera is on-air
• Blinking red: fault condition
• Yellow: firmware update is in progress

Vaddio OneLINK HDMI Extension System for HDBaseT Cameras

EAN: 840077500832

The Vaddio OneLINK HDMI Extension System for HDBaseT Cameras is an interface that allows you to power, receive HDMI video from, and control your compatible HDBT camera using a single Ethernet cable up to 328 long. The interface connects to your network for control, or you can use an RS-232 controller (not included) instead. HDMI video, up to 1080p60, is transmitted from your HDBT compatible camera to the OneLINK interface, from where it is available over a standard HDMI port.

• Video, power, network, and control on a single Cat5e (or better) cable
• Supports cable runs up to 328
• Works with RoboSHOT UHD HDBaseT cameras
• Bidirectional control via Ethernet and RS-232
• Transmits and receives HDMI video up to 1080p60