ARRI FF-4 15mm Follow Focus Set (Black Edition)

The FF-4 features a modular design that is compatible with most ARRI follow focus accessories such as whips, speed cranks, and knob accessories (available separately). One flat marking disk is included with the FF-4 Basic Unit.

A BA-2/3 adapter is required for use with a studio bridge plate

Features

Slide-on design for 15mm lightweight support rods requires BA-2 or BA-3 adapter for use with studio bridge plates

Single-style left (operator) side unit includes one standard knob

A 1:2 gear ratio suits a variety of lenses

Compatible with most ARRI follow focus accessories such as whips, speed cranks, and other style knobs

ARRI BA-3 FF-4 Adapter for Bridge Plate (15mm Studio Rods)

The ARRI BA-3 FF-4 Follow Focus Adapter is used with an ARRI FF-4 or FF-3 base component. Use this adapter to snap the FF-4/FF-3 onto a pair of bridge plate-supported 15mm studio rods (not included). The adapter fastens onto a pair of rods using a single thumbscrew. Mounting and detaching the BA-3 Adapter from the FF-4/FF-3 can be done in the field by the user and does not require shop service.

Works with both the HD and Cine versions of the FF-4 follow focus, and the FF-3

Thumbscrew-locking adapter snaps onto a pair of 15mm rods (rods not included)

Fastens onto both rods using a single thumbscrew

Can be mounted and removed in the field by the user

ARRI Follow Focus Gear (0.8 Mod, 35 Teeth)

This ARRI Follow Focus Gear can be used with all ARRI follow focus systems. The 35-tooth, 0.8 mod gear is designed for use with prime lenses and smaller zoom lenses that have 32 pitch gear rings. Its medium-width gear face measures 10mm.

Follow focus gear meshes with a lens ring to enable focus adjustments

0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm

For prime lenses and smaller zoom lenses with standard 32-pitch gear rings

ARRI Follow Focus Speed Crank

The ARRI Speed Crank fits into the socket of any ARRI follow focus knob. Designed for quick or extended focus pulls, this L-shaped handle enables a camera assistant to rotate the lens focus barrel further than possible when grasping the focus knob itself. The crank s round knob and right-angle configuration enable rotating the focus knob 360° or more, for those shots requiring extreme shifts in focus.

Attaches to the socket on any ARRI follow focus knob

Enables speedy or extended focus pulls with 360° or more of focus knob rotation

L-shaped handle with knob head for comfortable handling

ARRI Flat Marking Disk for WCU-3 & Standard/2-Speed FF Knob

This ARRI Flat Marking Disk is compatible with standard and two-speed follow focus knobs, and the WCU-3 hand unit knob. Use a non-permanent marker to apply temporary focus marks to its surface. This round plastic unit may be used as a replacement or additional marking disk.