ARRI FF-5 Follow Focus Cine Set Pro

The FF-5 Cine Base is designed for cine-style lenses. With a gear ratio of 2:1, one turn of the focus knob results in two turns of the focus gear. This gear ratio suits the generously-spaced focus marks found on most cine lenses.

Designed for cine-style lenses and offering a gear ratio of 2:1, one turn of the focus knob results in two turns of the focus gear

Base unit of the FF-5 follow focus system requires knobs and gear (available separately)

Snaps onto 15 or 19mm lightweight rods separate adapter required for use with 15 or 19mm studio systems (not included)

ARRI Standard Focus Knob (Left Side)

The left-sided ARRI Standard Focus Knob fits ARRI FF-5 and MFF-2 Cine/HD, and FF-4 follow focus units. This standard, single-speed knob is designed to work with cine-style lenses having hard infinity and close focus limits. One reusable flat marking disk is included with the knob. Compatible ARRI focus accessories such as whips, speed cranks, and extensions are available separately.

Single-speed focus knob for FF-5/FF-4/MFF-2 systems

Standard left-sided focus knob

For cine-style lenses with hard focus stops

Compatible with all ARRI follow focus accessories like extensions, cranks, and whips

ARRI Standard Focus Knob (Right Side)

The right-sided ARRI Standard Focus Knob fits ARRI FF-5 and MFF-2 Cine/HD, and FF-4 follow focus units. This standard, single-speed knob is designed to work with cine-style lenses having hard infinity and close focus limits. One reusable flat marking disk is included with the knob. Compatible ARRI focus accessories such as whips, speed cranks, and extensions are available separately.

Single-speed focus knob for FF-5/FF-4/MFF-2 systems

Provides right-sided focus-pulling option

For cine-style lenses with hard focus stops

Compatible with all ARRI follow focus accessories like extensions, cranks, and whips

ARRI Follow Focus Gear (0.8 Mod, 35 Teeth)

This ARRI Follow Focus Gear can be used with all ARRI follow focus systems. The 35-tooth, 0.8 mod gear is designed for use with prime lenses and smaller zoom lenses that have 32 pitch gear rings. Its medium-width gear face measures 10mm.

Follow focus gear meshes with a lens ring to enable focus adjustments

0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm

For prime lenses and smaller zoom lenses with standard 32-pitch gear rings

ARRI Follow Focus Gear (0.8 Mod, 43 Teeth)

This ARRI Follow Focus Gear can be used with all ARRI follow focus systems. The 43-tooth, 0.8 mod gear is designed for use with larger prime lenses and 35mm format zoom lenses that have 32 pitch gear rings. Its gear face width measures a relatively slim 6mm.

Follow focus gear meshes with a lens ring to enable focus adjustments

0.8 mod, 43-tooth, 32 pitch gear with a face width of 6mm

For larger prime lenses and 35mm format zoom lenses with standard 32-pitch gear rings

ARRI Follow Focus Speed Crank

The ARRI Speed Crank fits into the socket of any ARRI follow focus knob. Designed for quick or extended focus pulls, this L-shaped handle enables a camera assistant to rotate the lens focus barrel further than possible when grasping the focus knob itself. The crank s round knob and right-angle configuration enable rotating the focus knob 360° or more, for those shots requiring extreme shifts in focus.

Attaches to the socket on any ARRI follow focus knob

Enables speedy or extended focus pulls with 360° or more of focus knob rotation

L-shaped handle with knob head for comfortable handling

ARRI Short Flexible Shaft for Follow Focus (12 )

The 12 ARRI Short Flexible Shaft is a whip that fits into the socket of any ARRI follow focus knob. With this whip, a camera assistant can pull focus from a distance, diminishing the chance of jostling the camera when doing handheld work or ong shots.

ARRI Flat Marking Disk for WCU-3 & Standard/2-Speed FF Knob

This ARRI Flat Marking Disk is compatible with standard and two-speed follow focus knobs, and the WCU-3 hand unit knob. Use a non-permanent marker to apply temporary focus marks to its surface. This round plastic unit may be used as a replacement or additional marking disk.