ARRI LMB 6x6 19mm Studio 3-Stage Set

The ARRI LMB 6x6 19mm Studio 3-Stage Set adds a 19mm Studio Rod Adapter and a Tilt and Flex Adapter 80-156mm to the LMB 6x6 Clamp-On 3-Stage Set. This highly modular, lightweight matte box system includes single- and dual-filter stages, a top/bottom flag, a sunshade, two filter frames, two flag holders, and a #0 matte.

Note:

Requires separately available clamp-on rings.

ARRI LMB 6x6 Basic Module

The ARRI LMB 6x6 Basic Module is the core of the highly modular, lightweight LMB 6x6 matte box system. This module includes two 6.6 x 6.6" filter trays, a sunshade, a backplate with filter guides, two top flag holders, and a #0 matte.

The included #0 matte can be quickly snapped into the sunshade to protect your lens from dirt and dust while repositioning your camera or during a break in filming. This module features tray catchers for precisely holding the frames in place.

This adaptable LMB 6x6 Basic Module can be used with separately available lens clamp-on rings or mounted using 15 or 19mm rod supports. Components like a Swing-Away Tilt Module, top flag, mattes, and extra filter stages are available separately, enabling you to configure the system in as minimal or complete a configuration as needed. The LMB 6x6 Basic Module comes packed in a foam insert made to fit into a Pelican Case 1637.

Note:

Requires separately available clamp-on rings.

Features

Includes two 6.6 x 6.6" filter frames

Tray catchers hold the filter frames precisely in place

The included matte can be quickly snapped onto the matte box to protect your lens

Mounts via separately available lens adapter clamps or 15mm/19mm rod support

Configure as needed with separately available components

Includes a foam insert to hold the matte box components in a Pelican 1637 case

ARRI LMB 6x6 Extra Non-Rotatable Filter Stage

The ARRI LMB 6x6 Extra Non-Rotatable Filter Stage holds one 6.6 x 6.6" filter frame. Use this LMB 6x6 stage by itself as an ultralight filtering option for gimbal, stabilizer, or drone use, or add it to a two-filter stage to hold a third filter.

This filter stage incorporates tray catchers for precisely securing a filter frame, and it can mount the LMB 6x6 sunshade directly onto its front. No tools are needed for mounting the stage is attached using two integrated thumbscrews.

Note:

Requires separately available clamp-on rings.

Features

Holds one 6.6 x 6.6" filter frame

Offers single-filter mounting for gimbal, stabilizer, or drone use

Designed for ARRI LMB 6x6 lightweight matte box

Can directly support the LMB 6x6 sunshade

ARRI LMB 6x6 Top, Bottom Flag

Compatible with the LMB 6x6 lightweight matte box, the ARRI LMB 6x6 Top, Bottom Flag provides flare control for your lens, preventing a loss in image quality caused by stray light.

The lightweight flag incorporates two extendable wings and can be used at the top or bottom of the matte box. This flag can also be used to physically protect the front of the lens when moving your camera rig between shots or during a break in recording.

Note:

Requires separately available clamp-on rings.

Features

Can be attached to the top or bottom of the LMB 6x6 matte box

Two built-in wings for extended flare control

Carbon fiber construction

Can be used to shield the lens front between shots or during breaks

ARRI LMB 19mm Studio Rod Adapter

The ARRI LMB Studio Rod Adapter adds 19mm studio rod support to one of several components used with the LMB 4x5 or LMB 6x6 matte box. This adapter features thumb-lever rod locks and a toolless, screw-in design for quick mounting.

Note:

Requires separately available clamp-on rings.

Compatibility

LMB 4x5 15mm Lightweight Console

LMB 4x5 swing Away Tilt Module

LMB 6x6 Clamp Adapter 143mm

LMB 6x6 Clamp Adapter 156mm

LMB 6x6 Tilt and Flex Adapter

ARRI LMB 6x6 Tilt and Flex Adapter 80-156mm

ARRI s LMB 6x6 Tilt and Flex Adapter 80-156mm can be used to bridge any gap between extending front elements on your lens and an LMB 6x6 matte box. This adapter is compatible with lenses incorporating a front outer diameter between 80 and 156mm.

The Tilt and Flex Adapter will also compensate for the tilting angle created when using a Swing-Away Tilt Module with the LMB 6x6 matte box. An interface at the bottom of the adapter can accommodate either the LMB 15mm or LMB 19mm Studio Rod Adapter.

Note:

Requires separately available clamp-on rings.

Features

Fits lenses with diameters between 80 and 156mm

Bridges gap created by a lens with extending front elements or by a Swing-Away Tilt Module

Integrated rod interface for 15 or 19mm rods