Chrosziel Swing-Away Matte Box MB 565 Double 15 Kit for Full-Frame Cine Cameras (4x5.650'/4x4')

The Swing-Away Matte Box MB 565 Double 15 Kit from Chrosziel is designed to be used with full-frame cine cameras. The kit is composed of a clamp adapter with 150mm diameter, a swing-away arm for 15mm rods, a French flag, two 4x5.650" /4x4" filter holders, a Pivot mechanism set, a set of side wings, a set of rosettes for handles, an accessory bar with adjustable slider, a filter tray catcher, FlexiBellows, and a case with insert.

Chrosziel 15mm Swing-Away Arm Assembly for Cine.1 Matte Box

The Chrosziel 15mm Swing-Away Arm Assembly enables faster lens changes by conveniently moving the matte box out of the way of the lens. In addition to providing swing-away functionality, the assembly has joints which allow you to tilt the matte box as well as slide it horizontally and vertically when fitting it to your lens, compensating for possible inconsistencies found in complex rigging scenarios.

Chrosziel Top Flag for Cine.1 Matte Boxes

Chrosziel s Top Flag attaches directly to the Cine.1 matte box to block extraneous light from above. The flag folds in half for a smaller footprint when it s packed away. As an added touch, the flag has security holes which mate with safety latches on the matte box, preventing the flag from accidentally falling during installation.

Chrosziel 4 x 5.65" Filter Tray for Cine.1 Matte Box

This Replacement Filter Tray from Chrosziel can hold either a 4 x 5.65" or a 4 x 4" filter in a Cine.1 matte box filter stage.

Chrosziel Side Flag Pivot Mechanism Set for Cine.1 Matte Box

Install side flags in your Cine.1 Matte Box with this Chrosziel Side Flag Pivot Mechanism Set. Using the included screws, the pivot mechanisms secure to the left and right sides of the matte box and have screw clamps for holding side flags. Each pivot mechanism enables the side flags to be adjusted laterally to compensate for focal length.

Chrosziel Extra Large Matte Box Side Flags

Chrosziel s Extra Large Side Flags add light control to select matte boxes when strong light sources like the sun and high wattage broad lights. This side flag will block light sources and keep glare and flare from ruining your image.

Note: Pivot mechanism accessories are required to attach the side flags to your matte box

Adjustable

This side wing allows extra adjustment via a corner edge control this control will work with wide angle lenses and 16:9 aspect ratios, providing specific light control.

Chrosziel Rosette for Cine.1 Matte Box (Pair)

This pair of Rosettes from Chrosziel attach directly to the Cine.1 matte box frame, allowing you to secure accessories compatible with the Arri rosette standard to the Cine.1 matte box.

Chrosziel Top Accessory Bar for Cine.1 Matte Box

Mount accessories top of your Cine.1 matte box with Chrosziel s Top Accessory Bar. The bar itself slots in at the top of the Cine.1 matte box and provides 1/4" -20 and 3/8" -16 tapped holes to mount articulating arms or other accessories. The top of the bar includes a sliding accessory mounting thread for attaching distance measurement equipment.

Chrosziel Filter Tray Catcher for Cine.1 Matte Box

This Tray Catcher from Chrosziel attaches to the bottom of the Cine.1 matte box and extends to prevent filter trays from accidentally falling through the matte box during loading.

Chrosziel 150mm FlexiBellows for MB 565 MatteBox

The FlexiBellows from Chrosziel is a 150mm rubber retaining ring with a 35mm (approx.) flexible rubber bellows, and it is designed to fit 70 to 110mm diameter lenses. This lens retaining ring is compatible with the MB 565 MatteBox.

Chrosziel Hard Case for Cine.1 Matte Box

Protect your Cine.1 Matte Box with this Chrosziel Hard Case. A pre-cut insert is form-fit for the Cine.1 Matte box for security. Dual locking latches secure the lid from falls and seals the inside against outside weather. The case s handle has a rubber grip for comfort when transporting by hand.