Tilta Mirage Matte Box with Top Flag and Pocket Follow Focus Kit

Mirage Matte Box with Top Flag and Pocket Follow Focus Kit Overview

Build up your camera lens setup with this Tilta Mirage Matte Box with Top Flag and Pocket Follow Focus Kit. This kit includes the Mirage Matte Box with top flag, four adapter rings, a circular filter tray, and a carry case. It also includes the Tiltaing Pocket Follow Focus with a 15mm single-rod holder, 3.9" 15mm rod, 0.8 MOD gear, and safety case.

The matte box clamps onto 95mm lenses, and four adapter rings are included to accommodate lenses with 67, 72, 77, or 82mm diameters. It is compatible with 95mm round filters and features a slot for an optional 4 x 5.65" filter holder or Tilta's automated VND system. The manual pocket follow focus features a large handwheel with adjustable hard limits, and it mounts onto your rig using the included 15mm rod holder and 3.9" 15mm rod.

Tilta Mirage Matte Box

Built rugged for daily use on your camera rig yet lightweight for handheld, gimbal, stabilizer, or drone work, the Tilta Mirage Matte Box is a modular component system that clips onto 95mm OD lenses common in the film and digital cine fields. The matte box weighs about the same as a standard 4 x 5.65" glass filter, and it accepts Tilta's 95mm round filters with the included filter adapter. The modular design means you can configure the matte box to match your needs on a shot-by-shot basis.

The Mirage comes with a rigid hood and removable top flag for cutting glare and protecting your image from overhead flare. Four included lens adapters enable mounting the Mirage Matte Box on lenses with 67, 72, 77, or 82mm threaded fronts, and an included soft case helps to protect your matte box during transport and storage. An optional 4 x 5.65" stackable filter holder lets you mount 4 x 5.65" filters on the matte box. Additionally, you can mount an optional Tilta VND system for creating precise variable ND effects remotely. Other modular components, such as a top flag, dual circular filter tray, filter protector, and rubber hood for shooting up against windows, are available separately. An optional 15mm LWS rod clamp can be attached, allowing you to mount the Mirage on rods to take the weight off your lens or use lenses with rotating fronts.

Designed for the Wind

The matte box body has been designed to aid airflow with integrated vents that can reduce wind resistance and improve stability when shooting subjects at high speeds, such as in a car or on a drone.

Modular Design

The modular design allows you to configure your matte box in a variety of ways: from completely stripped down using only the 95mm filter holder with the lens clamp to adding a 4 x 5.65" stackable tray, the included lens hood, the included top flag, or swap the hood for an optional rubber hood. Additionally, you can add the optional 15mm LWS rod support, so you can mount the matte box to rods for handling heavier filter loads, such as the optional VND (variable neutral density) system.

95mm Circular Filter System

Tilta's 95mm circular (round) filter system proves coverage for lenses with up to a 95mm outer lens barrel diameter, and it provides significant weight savings over traditional filters as the circular filters weigh about 1/4 the weight of traditional 4 x 5.65" glass filters.

Filters

An optional 4 x 5.65" stackable filter tray can be added between the filter clamp and matte box hood, allowing you to easily add one or two 4 x 5.65" filters to the matte box.

EAN: 810076273471

Tilta Tiltaing Pocket Follow Focus

The Tiltaing Pocket Follow Focus from Tilta allows you to take full creative control of your image acquisition. Use the included 3.9" 15mm rod and single-rod clamp to mount the unit or mount the clamp on any standard 15mm rod. Smooth focus control is at your fingertips with hard stops that give you the freedom to pull focus between two specific distances with ease and precision. The locking system easily engages and disengages hard stop limits without the need to have these removed and lose their position.

The follow focus rotates 360° , and the fluid damping system on the focus wheel mimics the feel of the lens to help with accurate handling. The included 0.8 MOD gear is compatible with most cinema lenses, as well as the photo lens gear ring that comes in the box, which also includes a removable marking disk. A hard-shell safety case fits all the components, making it ideal for transport and storage.

Key Features

• Accommodate lenses with various gear ring sizes
• Tactile focus via simulated lens damping and nonslip grip
• A/B marks are set quickly with quick release hard stop system
• Compatible with most systems using a single 15mm rod
• Composite material greatly improves the mechanics of the system while remaining lightweight, compact design
• Includes two Allen keys and a hard-shell safety case
• Compatible with most standard focus whips and cranks

EAN: 810076270197