Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Movcam SCU-1 Hand Control Unit for 1-Axis System
This SCU-1 Hand Control Unit for 1-Axis System is the hand controller/focus knob for Movcam s Single or Dual-Axis Wireless Lens Control System. This is the wireless controller/focus unit only and requires that you source the motor, receiver, and other necessary components yourself. The controller incorporates an OLED information screen that is visible both indoors and out, and it supports automatic lens calibration.
The focus controller/transmitter incorporates a slot that accepts NP-F550 and F570 type batteries internally (batteries not included). Although the system has a wireless range of about 90 indoors and over 650 outdoors, you can connect an available (not included) cable to hardwire the focus controller to the motors (motors not included).
Modular design that can be upgraded from single axis (focus) to dual axis (focus and zoom)
The marking disc on the handwheel is compatible with dry and wet erase markers, removable, and backlit
The screen of the wireless transmitter with the focus handwheel displays the following:
Battery Storage
Record/Stby
Lim
Channel selected
Calibration
Menu
The Menu includes: Home Page
Switch Wireless Module Channel
Control Set Up
Motor Setup
Adjust Torque
Stick Speed
Adjust Screen Brightness
Knob Illumination Switch
Language
Restore Factory Defaults
Software Updates
System Data
This SCU-1 Hand Control Unit for 1-Axis System is the hand controller/focus knob for Movcam s Single or Dual-Axis Wireless Lens Control System. This is the wireless controller/focus unit only and requires that you source the motor, receiver, and other necessary components yourself. The controller incorporates an OLED information screen that is visible both indoors and out, and it supports automatic lens calibration.
The focus controller/transmitter incorporates a slot that accepts NP-F550 and F570 type batteries internally (batteries not included). Although the system has a wireless range of about 90 indoors and over 650 outdoors, you can connect an available (not included) cable to hardwire the focus controller to the motors (motors not included).
Modular design that can be upgraded from single axis (focus) to dual axis (focus and zoom)
The marking disc on the handwheel is compatible with dry and wet erase markers, removable, and backlit
The screen of the wireless transmitter with the focus handwheel displays the following:
Battery Storage
Record/Stby
Lim
Channel selected
Calibration
Menu
The Menu includes: Home Page
Switch Wireless Module Channel
Control Set Up
Motor Setup
Adjust Torque
Stick Speed
Adjust Screen Brightness
Knob Illumination Switch
Language
Restore Factory Defaults
Software Updates
System Data
Movcam SCU-1 Specs
| Transmission Distance | Indoor: 98` / 30 m Outdoor: 656` / 200 m |
| Latency | <12 ms |
| Frequency | ISM 2.4 M |
| OLED Viewscreen | 1.56" / 3.96 cm |
| Power | Volts: 12 to 24 VDC Consumption: 150 mA, 7.2 VDC |
| Memory Card Slot | miniSD |
| Battery Compatibility | Sony NP-F570 / 550 |
| Dimensions | 6.14 x 3.31 x 2.97" / 15.60 x 8.41 x 7.54 cm |
| Weight | Approximately: 1.0 lb / 0.5 kg |
In the Box
- Movcam SCU-1 Hand Control Unit for 1-Axis System
- Carrying Strap
- 2-Year Manufacturer Warranty
No posts found
