Chrosziel MagNum 300 3-Channel Broadcast Lens Control System

Chrosziel MagNum 200 2-Channel Wireless Lens Control Receiver

With dual outputs, the Chrozsiel MagNum 200 Dual-Channel Wireless Lens Control Receiver can drive up to two motors that connect via 7-pin LEMO. The receiver is capable of calibrating motors to the lens without the aid of the transmitter. When connected to a camera via the serial output, start/stop can be remotely controlled from the transmitter. The MagNum 200 system can operate on 2.4GHz and 430MHz frequencies for ensuring the greatest possible working distance and reliability. The 2.4GHz antenna is built-in and a BNC 430MHz antenna is included. The the receiver can be used in a wired/studio configuration drive motors with input from ENG demand controls. Using an Aladin extension modules, which are mountable to the receiver body, the MagNum system can control up to four motors in total.

Chrosziel MagNum Extension Module

Attaching the Chrosziel MagNum Extension Module to the MagNum 200 Receiver expands the MagNum system to be a fully functional 3-axis lens control solution for focus iris and zoom. The Extension Module has a 7-pin LEMO connection for a digital motor and a 12-pin Hirose connection for connection to ENG cameras for iris control and VTR/talkback control.

Chrosziel 12-Pin Hirose Aladin Lens Port to Camera Lens Cable

Use the Chrosziel 12-Pin Hirose Aladin Lens Port to Camera Lens Cable to connect the Aladin interface module to a camera lens servo.

Chrosziel HedA©n M26VE Lens Control Motor

The Chrosziel HedA©n M26VE Motor is a quiet, yet high-torque lens motor for driving focus, zoom, or iris rings on cinema or ENG lenses. The included 0.8 MOD gear interfaces with standard cine lenses or photo lenses with gear rings. 0.6, 0.5, and 0.4 MOD gears are included for ENG lenses as well. Gears can be attached on either side of the motor. The high torque of the motor can drive most lenses regardless of mechanical stiffness due to cold weather or age. Secure the motor itself to your rig using the 19mm rod clamp, which includes a 15mm bushing for lightweight setups. This particular model of M26VE features 512 encoders and a 0k resistor for compatibility with Chrosziel Aladin and MagNum equipment. A 7-pin LEMO connection provides both power and control signals to the motor from the receiver or motor driver.

Chrosziel 7-Pin LEMO Digital Motor Cable for AL2/Magnum (23 )

Connect a motor to your Chrosziel Aladin or Magnum wireless follow focus receiver with the MODT60 7-Pin LEMO Motor Cable. The motor cable is compatible with Heden M26VE, BTM, Scorpio SB92, and Preston DM2 digital motors.

Chrosziel XLR 4-Pin Male to MagNum Lemo 5-Pin 12V Power Cable

The XLR 4-Pin Male to MagNum Lemo 5-Pin 12V Power Cable from Chrosziel is designed for use with the MagNum camera and lens remote control. The XLR 4-pin Male connects to the MagNum Power Lemo 5-pin.

Chrosziel MN-RMB1 Mounting Bracket for MagNum Receiver

The Chrosziel MN-RMB1 Mounting Bracket for MagNum Receiver is designed to attach a MagNum receiver onto a camera s cold or hot shoe. It is compatible with MN-100R and MN-200R MagNum receivers. The bracket is attached to the receiver via 2 locking screws.

Chrosziel MN-RMB2 MagNum QuickFit Rod Mount

The Chrosziel MN-RMB2 MagNum QuickFit Rod Mount is designed for use with the MagNum receiver with shoe adapter. The MN-RMB2 is an accessory bridge for 15mm LWS (light weight support) and 19mm rods. It includes a cold shoe which allows you to mount the receiver in front of or behind the camera body to keep the camera package cleanly set up and balanced. The MN-RMB2 features a cold shoe for lateral attachment of devices.

Chrosziel Case with Insert for MagNum Lens Control Unit

This Chrosziel Case is a hard case with a protective foam insert for the MagNum lens control. It is designed to fit the unit along with a motor, all motor cables, and a D-Tap power cable.