Chrosziel MN-300 MagNum 3-Axis Wireless Lens Control System with Chrosziel Motors

Wirelessly control your lens with precision using the Chrosziel MN-300 MagNum 3-Axis Wireless Lens Control System. This version of the kit comes with 3 Chrosziel compact digital motors for interfacing with your lens of choice. Your motors connect to the included receiver and extension module using the included cabling. A battery, antennas, and straps for the hand unit are also included. The zoom rocker fixes to the rear of the hand unit enabling smooth and ergonomic control of the zoom axis. For transport and storage, the kit fits nicely into the included hard case. See below for more information on the individual items in this kit.

Chrosziel MagNum 200 2-Channel Wireless Lens Control Hand Unit

Chrosziel`s MagNum 200 2-Channel Hand Unit for the MagNum wireless lens control system can remotely control focus and iris. Focus is controlled with a fluid-dampened hand wheel. Hard stops can be set along the focus rotation for focus marks. Iris is controlled with a linear slider on an aluminum scale. Compact in size, the transmitter has a rounded handle with a finger grip on the rear so you can hold it securely while operating. The transmitter houses an internal 2.4 GHz antenna and a BNC spigot that will accept an external 434 MHz antenna. To avoid issues with radio interference, there is an integrated spectrum analyzer that can determine the best frequency for transmission. Menu navigation is done by way of an easy-to-read OLED display and membrane directional keys. Included with this transmitter is a BNC antenna for 430 MHz operation, and a hand strap.

Chrosziel MagNum 200 2-Channel Wireless Lens Control Receiver

With dual outputs, the Chrozsiel MagNum 200 Dual-Channel Wireless Lens Control Receiver can drive up to two motors that connect via 7-pin LEMO. The receiver is capable of calibrating motors to the lens without the aid of the transmitter. When connected to a camera via the serial output, start/stop can be remotely controlled from the transmitter. The MagNum 200 system can operate on 2.4GHz and 430MHz frequencies for ensuring the greatest possible working distance and reliability. The 2.4GHz antenna is built-in and a BNC 430MHz antenna is included. The the receiver can be used in a wired/studio configuration drive motors with input from ENG demand controls. Using an Aladin extension modules, which are mountable to the receiver body, the MagNum system can control up to four motors in total.

Chrosziel MagNum Extension Module

Attaching the Chrosziel MagNum Extension Module to the MagNum 200 Receiver expands the MagNum system to be a fully functional 3-axis lens control solution for focus iris and zoom. The Extension Module has a 7-pin LEMO connection for a digital motor and a 12-pin Hirose connection for connection to ENG cameras for iris control and VTR/talkback control.

Chrosziel Zoom Rocker for MagNum MN-200/150

The Zoom Rocker from Chrosziel is designed for use with the MagNum MN-150T Extendable Transmitter or the MN-200T Extendable Transmitter with antenna. It includes a personal code to activate the zoom software module.

Compatibility

MagNum MN-150T Extendable Transmitter (2016 or later models)
MagNum MN-200T Extendable Transmitter with antenna (2016 or later models)

Chrosziel MN-BAT MagNum Remote Control Battery

The MN-BAT MagNum Remote Control Battery is a rechargeable Li-Ion battery for the MagNum wireless lens control unit and is recharged by the MN-CH battery charger (not included).

Also compatible with Sony NP-FM50/55 cameras

Chrosziel MN-CH MagNum Battery Charger

The Chrosziel MN-CH MagNum Battery Charger is a charger for the MF-50 batteries used with the MagNum wireless lens control. The charger can be used worldwide on any power source, as well as the 12 VDC car cigarette lighter outlet. The MN-CH includes cables for US, UK, Europe, and car outlets.

Chrosziel Padded Neck Strap for Lens Control Transmitters (Black)

The Chrosziel Padded Neck Strap is an elastic strap with the Chrosziel logo designed for your LCS transmitter. It offers maximum comfort at minimum weight while carrying your transmitter.

Chrosziel CDM-100 Digital Motor

Designed for gimbal and drone setups, Chrosziel`s CDM-100 Digital Motor is small at only 19mm in diameter and features an integrated 27.6" LEMO 7-pin 1B cable for connecting to Chrosziel`s FIZ systems. Since this motor utilizes a horizontal design and an integrated cable, it can be kept to a low profile when size and weight, or lack thereof, are of prime importance. This motor includes a 19mm clamp with a 15mm adapter for LWS compatibility and two MOD 0.8 gears; one 1.6" and one 2.4" in diameter to compensate for recessed lens control rings.

Chrosziel 7-Pin LEMO Digital Motor Cable for AL2/Magnum (23")

Connect a motor to your Chrosziel Aladin or Magnum wireless follow focus receiver with the MODT60 7-Pin LEMO Motor Cable. The motor cable is compatible with Heden M26VE, BTM, Scorpio SB92, and Preston DM2 digital motors.

Chrosziel D-Tap Power Cable for MagNum

The D-Tap Power Cable for MagNum from Chrosziel is a power cable designed for use with the MagNum camera and lens remote control. It will also work with the Aladin II and AL2-INTF systems. Plug the D-Tap end into the power source and the 5-pin LEMO end into the receiver for powering.

Chrosziel MN-RMB1 Mounting Bracket for MagNum Receiver

The Chrosziel MN-RMB1 Mounting Bracket for MagNum Receiver is designed to attach a MagNum receiver onto a camera`s cold or hot shoe. It is compatible with MN-100R and MN-200R MagNum receivers. The bracket is attached to the receiver via 2 locking screws.

Chrosziel Case with Insert for MagNum Lens Control Unit

This Chrosziel Case is a hard case with a protective foam insert for the MagNum lens control. It is designed to fit the unit along with a motor, all motor cables, and a D-Tap power cable.