Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
CINEGEARS Customizable Geared Focus Ring
EAN: 743724114584
Providing a way to add a standard cine-style focus gear to your lens, the CINEGEARS Customizable Geared Focus Ring is a strong yet flexible rubber gear strip that you customize to fit the circumference of your lens. The gear is delivered as a rubber strip slightly longer than 12 long, which would correspond to a focus ring barrel just under 4 in diameter.
The strip comes pre-scored for accurate trimming and with pre-formed holes for the metal clip that turns the rubber strip into lens gear. The gear features 0.8 MOD teeth that interface with 32 pitch cine-style focus drive gears.
The 0.8 MOD gear teeth interface with industry standard 32 pitch cine-style follow focus drive gears.
You customize the flexible rubber strip to fit your lens. After cutting the strip to length, you butt the ends together and insert the metal clip to form the lens gear.
CINEGEARS Single Axis Wireless Motor Power Cable
EAN: 743724113969
The CINEGEARS Single Axis Wireless Motor Power Cable provides power to your motor from an optional power source outfitted with a D-tap connector. The cable features a D-tap connector on one end and a 2-pin LEMO connector on the other. The cable features plastic insulation, and it can handle from 12 to 28 VDC.
Approximately 44 long
LEMO connector prevents polarity reversal when use with CINEGEARS motor.
CINEGEARS 4-Pin Start/Stop Cable for Sony F5/F55
The Cinegears 4-Pin Start/Stop Cable can be used in conjunction with the Cinegears Start/Stop Trigger or Cinegears Single Axis Wireless Follow Focus System to trigger your Sony F5/F55 cameras remotely.
CINEGEARS Hard Case with Foam Inserts for Single-Axis Kit
EAN: 743724114720
The CINEGEARS Hard Case with Foam Inserts for Single-Axis Kit is a waterproof case that provides protection to your equipment from damage from falls and impact. The custom cut foam interior allows you to keep the components of your single axis wireless kit snug and secure during transport and storage.
CINEGEARS Thick Focus Ring for Express Controller
The Thick Focus Ring from CINEGEARS is for use with Express Controller. It is made of whiteboard material and held in place with three strong magnets.
CINEGEARS 2 Rod Bracket for Lens Control Motors (19mm)
EAN: 743724114102
The CINEGEARS 2 Rod Bracket for Lens Control Motors mounts on a 19mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens s geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.
Provides height adjustment when used with an optional CINEGEARS Lens Control Motor.
The 19mm clamp is designed to work specifically with 19mm support rods.
The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.
EAN: 743724114584
Providing a way to add a standard cine-style focus gear to your lens, the CINEGEARS Customizable Geared Focus Ring is a strong yet flexible rubber gear strip that you customize to fit the circumference of your lens. The gear is delivered as a rubber strip slightly longer than 12 long, which would correspond to a focus ring barrel just under 4 in diameter.
The strip comes pre-scored for accurate trimming and with pre-formed holes for the metal clip that turns the rubber strip into lens gear. The gear features 0.8 MOD teeth that interface with 32 pitch cine-style focus drive gears.
The 0.8 MOD gear teeth interface with industry standard 32 pitch cine-style follow focus drive gears.
You customize the flexible rubber strip to fit your lens. After cutting the strip to length, you butt the ends together and insert the metal clip to form the lens gear.
CINEGEARS Single Axis Wireless Motor Power Cable
EAN: 743724113969
The CINEGEARS Single Axis Wireless Motor Power Cable provides power to your motor from an optional power source outfitted with a D-tap connector. The cable features a D-tap connector on one end and a 2-pin LEMO connector on the other. The cable features plastic insulation, and it can handle from 12 to 28 VDC.
Approximately 44 long
LEMO connector prevents polarity reversal when use with CINEGEARS motor.
CINEGEARS 4-Pin Start/Stop Cable for Sony F5/F55
The Cinegears 4-Pin Start/Stop Cable can be used in conjunction with the Cinegears Start/Stop Trigger or Cinegears Single Axis Wireless Follow Focus System to trigger your Sony F5/F55 cameras remotely.
CINEGEARS Hard Case with Foam Inserts for Single-Axis Kit
EAN: 743724114720
The CINEGEARS Hard Case with Foam Inserts for Single-Axis Kit is a waterproof case that provides protection to your equipment from damage from falls and impact. The custom cut foam interior allows you to keep the components of your single axis wireless kit snug and secure during transport and storage.
CINEGEARS Thick Focus Ring for Express Controller
The Thick Focus Ring from CINEGEARS is for use with Express Controller. It is made of whiteboard material and held in place with three strong magnets.
CINEGEARS 2 Rod Bracket for Lens Control Motors (19mm)
EAN: 743724114102
The CINEGEARS 2 Rod Bracket for Lens Control Motors mounts on a 19mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens s geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.
Provides height adjustment when used with an optional CINEGEARS Lens Control Motor.
The 19mm clamp is designed to work specifically with 19mm support rods.
The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.
CINEGEARS Customizable Geared Focus Ring Specs
| Material of Construction | Rubber |
| Gear Standard | MOD: 0.8 Pitch: 32 |
| Dimensions | 12.4 x 0.4 x 0.2" / 31.5 x 1.0 x 0.6 cm |
| Weight | 0.4 oz / 10.0 g |
In the Box
- 2 Years Manufacturer Warranty
- 2 Years Manufacturer Warranty
- 2 Years Manufacturer Warranty
- 2 Years Manufacturer Warranty
- Single-Axis Wireless Express Plus Controller
- 19 to 15mm Adapter Bushing
No posts found
