CINEGEARS Single Axis Wireless Follow Focus Express Plus Standard Kit

Providing a complete single-axis lens control system packed in a hard case, the Single Axis Wireless Follow Focus Express Plus Standard Kit from CINEGEARS allows you to set up a wireless lens control motor and controller system on your camera system equipped with geared lens and either 15mm or 19mm support rods. The lens controller allows you to adjust the end points to program focus stops, in addition to the two adjustable hard stops on the handwheel. The kit includes two 2" rod clamps with mounting brackets, one each 15mm and 19mm rod clamps, allowing you to mount the included lens control motor on either size rod. The third clamp is approximately 3" long and mounts to a 19mm rod, or a 15mm rod using the included adapter bushing.

In addition to the replaceable cinema-style drive gear that comes with the lens control motor, the kit includes four different replacement gears with gear MODs of 0.5, 0.6, 0.8, and 1.0, in case you have to drive lenses with non-cine-style gearing or plastic lens gears. The included gear re-locator allows you to use lenses that focus in the opposite direction from standard, without having to alter your focus-pulling technique for those lenses. The kit fits into a waterproof case with foam inserts to protect your equipment during transport and storage.

CINEGEARS Single Axis Wireless Express Plus Controller

The CINEGEARS Single Axis Wireless Express Plus Controller is a wireless follow focus controller that easily pairs with a CINEGEARS wireless motor. You can use the controller for focus, zoom, or iris. The controller operates on a frequency of 433 MHz, providing a range of up to 320 line of sight. The wireless controller and optional motor combination provide simple auto lens calibration and manual lens remapping for easy lens changes.

The Express Plus Controller features a removable marking disc, a side mounted index marker with an illuminating LED for pulling focus in dim lighting conditions, and allows you to program up to four stop / positions. Adjustable physical hard stops on the controller are useful when working with lenses that do not have physical hard stops. You can adjust the transition speed for programmed presets, and with optional cables connected to your motor, you can control start/ stop for ARRI, RED, Sony, and Canon professional camcorders. LED indicator lights show you the status of the controller.

The wireless controller features an internal LiPo battery that can run the controller for approximately 20 hours on a single charge. You can operate the controller while simultaneously charging it. Charging is via a mini USB connector, and it supports input voltage range of 12 to 30 VDC.

The controller supports auto-calibration, manual calibration, and lens remapping.

After calibration, the end stops are automatically slightly shortened, preventing you from pinning the lens.

You can program focus pre-sets into the controller and then transition between the focus points at the push of a button with adjustable transition speed.

Manual calibration allows you to set close and far distance stops when using an infinitely rotating lens

The Express Plus Controller features adjustable hard stops that you can use to match the end stops of your calibrated lens. You can also adjust the stops to reflect the positions of the start and stop of your focus pull, so you can pull focus without looking at the controller.

The Express Plus Controller features a built-in LED that illuminates the area of the removable marking disk around the index mark, allowing you to more easily see your marks in dim or dark conditions.

EAN: 743724113983

CINEGEARS 2" Rod Bracket for Lens Control Motors (15mm)

The CINEGEARS 2" Rod Bracket for Lens Control Motors mounts on a 15mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens s geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.

Provides height adjustment when used with an optional CINEGEARS Lens Control Motor.

The 15mm clamp is designed to work specifically with 15mm support rods.

The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.

EAN: 743724114089

CINEGEARS 2" Rod Bracket for Lens Control Motors (19mm)

The CINEGEARS 2" Rod Bracket for Lens Control Motors mounts on a 19mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens s geared focus, zoom, or iris. It features a spring-loaded locking lever that allows you to tighten the bracket on the clamp, while at the same time securing the motor to the clamp.

Provides height adjustment when used with an optional CINEGEARS Lens Control Motor.

The 19mm clamp is designed to work specifically with 19mm support rods.

The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.

EAN: 743724114102

CINEGEARS 3.1" Rod Bracket for Lens Control Motors (15mm)

The CINEGEARS 3.1" Rod Bracket for Lens Control Motors mounts on a 15mm support rod and allows you to mount your CINEGEARS lens control motor on your rods and drive your lens s geared focus, zoom, or iris ring. It features two spring-loaded locking levers one that allows you to tighten the bracket on the rod, and a second locking lever that secures the motor to the clamp.

Provides height adjustment when used with an optional CINEGEARS Lens Control Motor.

The 15mm clamp is designed to work specifically with 15mm support rods

The spring-loaded locking levers allow you to tighten or loosen the clamps, even when you do not have room to rotate the lever through 360° of rotation. If the lever becomes blocked, you gently pull up on the lever, rotate it back, and lower the lever to continue tightening or loosening it.

EAN: 743724114096

CINEGEARS Magnetic Beveled Marking Disc for Express Controller

The CINEGEARS Magnetic Beveled Marking Disc for Express Controller is specifically made to work with a CINEGEARS Express controller, and only the Express controller. It magnetically mounts on the controller and incorporates a slot for a corresponding index pin, which prevents the marking disk from spinning on the controller, ensuring your marks stay accurate. The disk is made to be used with either dry or wet erase marker for easy cleaning and re-marking.

EAN: 743724114058

CINEGEARS 4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors (0.5, 0.6, 0.8, 1.0)

The CINEGEARS 4 x 38mm Diameter Replacement Gear Set for CINEGEARS Lens Motors features 4 lightweight plastic gears that allow you to drive most geared cine or ENG-style