The ikan Remote Air Pro Wireless Follow Focus Single-Motor Kit is designed to create a FIZ (focus, iris, zoom) control unit based around your iOS device. This allows your mobile device (not included), along with the downloadable app, to control the motors and display the lens information on your mobile device. Your iOS smartphone is clamped into the holder that includes the focus knob. The app provides the readout and allows you to control the iris and zoom motors using your phone s touchscreen.
The kit supports 20 user-selectable channels, so you can find a clean channel over which to control your motors. The kit includes an integrated hand control unit, three glow-in-the-dark marking rings, three antennas, a 15/19mm adapter ring, 6-pin D-Tap power cable, Lightning to USB connecting cable, PD Movie lanyard, receiver/master motor, USB charger, 4-pin USB charging cable, iPhone 6/6s/6 Plus/6s Plus clamp, and an iPod Touch clamp.
PDMOVIE Glow-In-The-Dark Magnetic Marking Disk
The Ikan Glow-In-The-Dark Magnetic Marking Disk is designed for use with the PD1 Remote Air One, PD1-HT Remote Air One High Torque, PD2 Remote Air Two, and PD2-HT Remote Air Two High Torque. The Remote Air s marking ring achieves automatic decimal alignment simultaneously when it is attached to the controller rotary table. It employs magnetic attachment to mark the stroke scale and combines with Remote Air s automatic stroke detection function for increasing the marking speed. When you use a new lens, an already aligned marking ring can be preserved for next use.
EAN: 847983014552
ikan PD3-ANT Antenna for Remote Air, Air 2 & Air Pro
The ikan PD3-ANT Antenna is a replacement for the ikan Remote Air, Remote Air 2, and Remote Air Pro lines of follow focus systems.
PDMOVIE 19 to 15mm Rod Adapter Bushing (PD Movie)
This 19 to 15mm Rod Adapter Bushing from Ikan fits into the 19mm rod bracket for PD Movie motors, enabling you to mount the motor on a 15mm support rod. The bushing is split, allowing it to compress, so it is easier to fit into the 19mm opening. The bushing s textured finish improves grip, and a contoured lip holds the bushing in place inside the rod clamp when not mounted on a rod.
Split in bushing allows for compression
Textured surface reduces slip
Contoured lip helps prevent bushing from falling out of the mounting bracket when not in use
EAN: 847983012534
PDMOVIE 25" Remote Air Pro D-Tap to LEMO Cable
The Remote Air Pro D-Tap to LEMO Cable from ikan is for use with the PD3-P1, PD3-P2, and PD3-P3 Remote Air Pro Single Channel Wireless Follow Focuses. This 25" cable features a D-Tap at one end and the other end is a 6-pin LEMO connector.
Compatibility
PD3-P1, PD3-P2, and PD3-P3 Remote Air Pro Single Channel Wireless Follow Focuses
EAN: 847983018147
PDMOVIE PD Movie Lightning to USB Cable (3" )
The 3" PD Movie Lightning to USB Cable from ikan allows you charge devices having a lightning port via the USB port on the PD3 Remote Air Pro Wireless Follow Focus motor unit.
Compatible With
PD3-P1 Remote Air Pro 1-Channel Wireless Follow Focus
PD3-P2 Remote Air Pro 2-Channel Wireless Follow Focus
PD3-PD Remote Air Pro 3-Channel Wireless Follow Focus
PDMOVIE Replacement Strap for PD Movie Products
The Replacement Strap from Ikan is used with all PD Movie products.
Compatibility
All PD Movie products
EAN: 847983013814
PDMOVIE PD3-R Remote Air Pro Receiver Motor
The PD3-R Remote Air Pro Receiver Motor from ikan is designed for use with the PD Movie Remote Air wireless lens controllers.
EAN: 847983016266
PDMOVIE USB Charger for Remote Air Pro Follow Focus
The USB Charger from ikan is for use with the Remote Air Pro Follow Focus. It features 110/220V input and 5V output.
Compatbility
Remote Air Pro Follow Focus
EAN: 847983016235
ikan Replacement USB Charging Cable for Remote Air Pro Follow Focus
The Replacement USB Charging Cable from ikan is for use with the Remote Air Pro Follow Focus.
Compatibility
Remote Air Pro Follow Focus
PDMOVIE Replacement Clip for iPhone 6
The Replacement Clip from ikan is used to hold an iPhone 6 to the Remote Air Pro Follow Focus hand unit.
Compatibility
iPhone 6
PDMOVIE Replacement Clip for iPhone 6 Plus
The Replacement Clip from ikan is used to hold an iPhone 6 Plus to the Remote Air Pro Follow Focus hand unit.
Compatibility
iPhone 6 Plus
PDMOVIE Replacement Clip for iPod Touch
The Replacement Clip from ikan is used to hold an iPod Touch to the Remote Air Pro Follow Focus hand unit.
Compatibility
iPod Touch
PDMOVIE Glow-In-The-Dark Magnetic Marking Disk Specs
Packaging Info
| Package Weight | 0.04 lb |
| Box Dimensions (LxWxH) | 6.75 x 5.25 x 0.45" |
ikan PD3-ANT Antenna for Remote Air, Air 2 & Air Pro Specs
Packaging Info
| Package Weight | 0.1 lb |
| Box Dimensions (LxWxH) | 7 x 5.25 x 0.1" |
PDMOVIE 19 to 15mm Rod Adapter Bushing (PD Movie) Specs
| Diameter | Outer: 19 mm Inner: 15 mm (when compressed) |
Packaging Info
| Package Weight | 0.02 lb |
| Box Dimensions (LxWxH) | 5 x 2.5 x 0.1" |
PDMOVIE 25" Remote Air Pro D-Tap to LEMO Cable Specs
| Cable Length | 25" (63.5 cm) |
Packaging Info
| Package Weight | 0.2 lb |
| Box Dimensions (LxWxH) | 4.9 x 1.9 x 1" |
PDMOVIE PD Movie Lightning to USB Cable (3") Specs
| Connector 1 | Lightning connector |
| Connector 2 | USB |
| Length | 3" (7.6 cm) |
Packaging Info
| Package Weight | 1 lb |
| Box Dimensions (LxWxH) | 7 x 5 x 1" |
PDMOVIE Replacement Strap for PD Movie Products Specs
| Length | 18" (46 cm) |
PDMOVIE PD3-R Remote Air Pro Receiver Motor Specs
| Torque | Maximum 0.5 Nm |
| Gear | Module: 0.8 Teeth: 40 |
| Noise | < 28 dB |
| Working Voltage | 12 to 18 V |
| Dimensions | 4.25 x 2.87 x 1.14" (108 x 73 x 29 mm) |
| Weight | 6.4 oz (181.4 g) |
PDMOVIE USB Charger for Remote Air Pro Follow Focus Specs
| Input | 110/220 VAC |
| Output | 5 VDC |
ikan Replacement USB Charging Cable for Remote Air Pro Follow Focus Specs
Packaging Info
| Package Weight | 1 lb |
| Box Dimensions (LxWxH) | 1 x 1 x 1" |
In the Box
- 2-Year Manufacturer Warranty
- 2-Year Warranty
- 2-Year Manufacturer Warranty
- 2-Year Warranty
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
