Redrock Micro microRemote Tandem Deluxe Bundle

Redrock Micro microRemote Handheld Wireless Focus Controller

The microRemote Handheld Wireless Focus Controller from Redrock Micro is designed to help control your camera focus while using stabilizers such as Steadicams, Jib Arms, and Gimbal Stabilizers. By controlling focus wirelessly you remove the need to directly touch the camera during a shot, but still control focus to direct your viewer s attention.

In situations where wireless may not be possible, the optional tethering cable wires the microRemote for direct, interference-free operation up to 20 feet away.

Camera Run/Stop

This Handheld Controller features the ability to trigger the Run/Stop of supported cameras (cable required). This allows for control of the camera remotely for when it may be inaccessible. The microRemote Handheld Unit also has a built in Run/Stop light that indicates when the camera is recording or not, so the camera does not need to be within your line of sight.

Lens Mapping

All lenses are mapped to the full 270° rotation of the microRemote. This is especially helpful for DSLR lenses that have very short throws, but also very helpful for some Cinema Lenses that have long throws. The expanded mapping on DSLR Lenses is designed to allow refined and precise focus pulls. The mapping process makes all lenses feel similar, allowing for a consistent feel throughout all lenses.

Wireless control of microRemote system up to 1 mile (1600m) line of sight

Adjustable Indicator Arm

Left/Right hand operation

3D Marking discs compatible with Flares for use in the dark

A dual adjustable hard stop for precision pulls

Powered by 2 AA batteries

Camera Run/Stop triggering

Reversible direction

Lanyard loop for resting around neck

1/4 -20 thread for building into a rig

Redrock Micro microRemote Handheld Bundle

With the microRemote Handheld Bundle you can control focus on your lens without taking your hand off your rig. This kit consists of the Basestation, a Digital Torque Motor, and a Fingerwheel controller. All required connection and power cables are available separately. When fully assembled, this kit provides immediate focus control without weighing down your handheld rig. The system can also be used in situations where direct contact with the lens is not possible, like when the camera is mounted on a motorized gimbal stabilizer.

The Basestation is the center of the microRemote system. It coordinates the Fingerwheel and calibrates the motors to the lenses. Power is also distributed through the Basestation. The Digital Torque Motor can drive photo or cinema lenses, while its small size keep it unobtrusive, and its light weight won t unbalance your rig. The motor will attach to 15mm rods and can be adjusted to fit the diameter of your lens. The included fingerwheel is designed to be mounted on a separately available microHandGrip and will be ideally positioned for index finger operation.

Works with virtually all cameras and lenses

Precision-movement fingerwheel

Can be alternately used to control zoom or iris (or multiple units can be combined to simultaneously control more than one lens setting)

Automatic lens calibration (with manual calibration option)

Powerful Redrock Torque motor works with cinema and still lenses

All-digital system

Redrock Micro Air Lens Gear (3-Pack)

The pack of three Air Lens Gear from Redrock Micro adds lightweight precision gearing for accurate and repeatable focusing when using a follow focus or wireless remote (sold separately). The gears are small enough to leave on even when shooting stills. It is designed with lubricated nylon that wraps around your lens focus ring. It features industry standard 0.8 gearing that works with any focus system, including the Redrock microFollowFocus, microRemote, and Eclipse.

Adapts still lenses for video and cinema accessories

Works with virtually any lens and can also be used on many iris and zoom rings

Redrock Micro microRemote Illuminated Marking Disk

The Redrock Micro microRemote Illuminated Marking Disk is a replacement or extra marking disk for use with the microRemote or microRemote Blue wireless lens control. The marking disk features a locator pin hole to ensure consistent alignment. This marking disk can be used with optional flares (sold separately), which will make the disk glow, aiding visibility in dimly lit environments.

Redrock Micro D-Tap to 2-Pin LEMO flexCable for microRemote (24 )

This 24 long Redrock Micro D-Tap to 2-Pin LEMO flexCable for microRemote is for powering an optional microRemote from a D-Tap power source.

Designed to be 200% more flexible than standard cables, which means easier cable wrangling and less drag when using accessories between the camera and gimbal frame, such as when using a Fingerwheel controller or for power connections.

The D-Tap connector is also known as a P-Tap connector.

Redrock Micro 7-Pin LEMO to 7-Pin LEMO flexCable for microRemote Torque Motor (24 )

This 24 long Redrock Micro 7-Pin LEMO to 7-Pin LEMO flexCable for microRemote Torque Motor connects to the 7-pin connector on an optional microRemote Basestation to an optional microRemote Torque motor, delivering both power and control from the basestation to the motor.

Designed to be 200% more flexible than standard cables, which means easier cable wrangling and less drag when using accessories between the camera and gimbal frame, such as when using a Fingerwheel controller or for power connections.

Redrock Micro flexCable for microRemote Fingerwheel (24 )

The Redrock Micro flexCable for the microRemote Fingerwheel lets you connect the microRemote Fingerwheel to the microRemote Basestation. This 24 version is designed to allow the camera operator to pull focus from the Fingerwheel. It features a 3-pin connector on one end and 5-pin on the other.

Lighter Design

flexCables are 35% lighter than most standard cables thanks in large part to the cable sheathing that s ultra-lightweight (yet still provides the required protection).

Increased Flexibility

flexCables have a 200% greater flexibility than most standard cables, allowing for less drag and easier cable wrangling. These cables can be wrapped, twisted, and bent to keep your rig tight without damaging or crimping the cable.

Thin Construction

flexCables are 20% thinner than most standard cables. You can more easily install them where you need to and secure them with less effort.

Redrock Micro microRemote Carrying Case

The Redrock Micro microRemote Carrying Case provides safe transport and storage for the microRemote lens control system. The case is made of impact resistant polypropylene and designed to be waterproof, rustproof, crushproof, and airtight. The custom-fit foam cutouts are specifically tailored to the microRemote handheld wireless controller, the microRemote basestation, and the Redrock Torque motor with additional space for cables, a fingerwheel, and other accessories.

• Impact resistant polypropylene
• Waterproof to a depth of 30
• Dustproof (IP standards 67)
• Airtight with pressure purge valve
• Custom fit foam cutouts
• Space for accessories
• Lifetime warranty