Axler RECODO Dual Head Mount Y Arm
EAN: 847628009417
The RECODO Dual Head Mount Y Arm enables mounting two accessories from a single mounting point. The Y arm consists of two long arms and a short arm that is generally thought of as the bottom mounting arm. The two long arms can be positioned next to each other or spread more than 90° & off-axis from each other, essentially pointing one arm forward and the other back. The long arms and short arm use ball joints for added flexibility, and a central locking knuckle loosens and tightens the joints.
Pointing both long arms away from the short arm gives you 8.6 of extension, and if you point each long arm 180° & in opposite directions, it creates 9 of distance. Although general usage is mounting the short arm to your camera, using the included coupler and cold shoe mount, and accessories to each long arm, you can also mount one of the long arms to your camera and then use the short arm and remaining long arm for accessories.
The design of the Y Arm provides you flexibility in mounting more than just one accessory using the single mounting arm
The included 1/4 -20 female-to-female coupler and included cold shoe mounting foot enable mounting the arm to your camera s cold shoe
The coupler can be used without the cold shoe mounting foot to provide a female 1/4 -20 thread
EAN: 847628009417
The RECODO Dual Head Mount Y Arm enables mounting two accessories from a single mounting point. The Y arm consists of two long arms and a short arm that is generally thought of as the bottom mounting arm. The two long arms can be positioned next to each other or spread more than 90° & off-axis from each other, essentially pointing one arm forward and the other back. The long arms and short arm use ball joints for added flexibility, and a central locking knuckle loosens and tightens the joints.
Pointing both long arms away from the short arm gives you 8.6 of extension, and if you point each long arm 180° & in opposite directions, it creates 9 of distance. Although general usage is mounting the short arm to your camera, using the included coupler and cold shoe mount, and accessories to each long arm, you can also mount one of the long arms to your camera and then use the short arm and remaining long arm for accessories.
The design of the Y Arm provides you flexibility in mounting more than just one accessory using the single mounting arm
The included 1/4 -20 female-to-female coupler and included cold shoe mounting foot enable mounting the arm to your camera s cold shoe
The coupler can be used without the cold shoe mounting foot to provide a female 1/4 -20 thread
Axler RECODO Specs
| Top Mount | 1/4"-20 Male 1/4"-20 Male |
| Bottom Mount | 1/4"-20 Male |
| Points of Articulation | 4 |
| Maximum Length | 8.89" / 22.58 cm |
| Width | 3" / 7.62 cm |
| Weight | 11.6 oz / 0.33 kg |
Packaging Info
| Package Weight | 0.765 lb |
| Box Dimensions (LxWxH) | 6.2 x 3.3 x 1.2" |
In the Box
- Axler RECODO Dual Head Mount Y Arm
- 1/4"-20 Female-to-Female Coupler
- Cold Shoe Mounting Foot
- 2-Year Manufacturer Warranty
Customer reviews
Recommendation for purchase
Nobody recommended yet this product
Any Experience With This product?
Share it with others to help them make the right choice
Write a review
Most positive
Soriano
Wednesday, 8 March 2023
Comment
I like this dual arm because it allows me to mount on a cold shoe while mounting two different accessories. ...
Was this review helpful?
Sort by:
With photos
Soriano
Wednesday, 8 March 2023
Comment
I like this dual arm because it allows me to mount on a cold shoe while mounting two different accessories. ...
Gabe
Saturday, 4 March 2023
Comment
Hadnt seen one like this before. Gave it a shot. Slims down the number of arms needed. However, youll need ...
