Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Noga NF9038CACineArm NF (Small)
The Noga NF9038CACineArm NF (Small) is composed of three-joints that can be quickly and efficiently locked or released using a kip lever-based central mechanism. All three-joints can be simultaneously locked using the single central locking knob. While supporting camera lights and monitors, you can move the arm horizontally or vertically, as well as achieve tilt adjustments to obtain the best possible view. With equal length on both sides, the arm offers increased strength and holding resistance.
Three-joint mounting arm
Provides quick and efficient locking or release of arms using a kip lever-based central mechanism
Offers simultaneous locking of all three joints via single central locking knob
Provides horizontal, vertical as well as tilt adjustments allowing you to obtain the best possible view
Equal length on both sides of the arms for increased strength and holding resistance
Supports camera lights and monitors
16x9 Cine Lock Quick Release Mounting Device
The 16x9 Cine Lock Quick Release Mounting Device consists of two parts that each attach to separate pieces of equipment and then lock into one another, and at the slide of a pin they unlock and separate from each other. Thus they provide quick-release functionality between cameras and accessories, and can be used with most any 1/4 or 3/8 gear.
The two parts are a burgundy wedge and a gray plate. They each attach onto a piece of equipment regardless of whether the equipment has a stud or a screw-hole as its mounting option. Both parts have to them two different-sized screw-holes. Via one of the two, each part either screws onto a stud, or -- by means of one of three screws that come included with the Cine Lock -- gets fastened to a screw-hole of a piece of equipment. The screw-holes of the wedge and plate are of 1/4 and 3/8 sizes, and the included screws are of the same sizes.
Provides quick-release functionality with most any 1/4 or 3/8 equipment.
Screws onto a stud or gets fastened into a screw-hole by means of included screws.
Consists of two components. One slides and locks into the other, and a slide of a pin unlocks them.
The Noga NF9038CACineArm NF (Small) is composed of three-joints that can be quickly and efficiently locked or released using a kip lever-based central mechanism. All three-joints can be simultaneously locked using the single central locking knob. While supporting camera lights and monitors, you can move the arm horizontally or vertically, as well as achieve tilt adjustments to obtain the best possible view. With equal length on both sides, the arm offers increased strength and holding resistance.
Three-joint mounting arm
Provides quick and efficient locking or release of arms using a kip lever-based central mechanism
Offers simultaneous locking of all three joints via single central locking knob
Provides horizontal, vertical as well as tilt adjustments allowing you to obtain the best possible view
Equal length on both sides of the arms for increased strength and holding resistance
Supports camera lights and monitors
16x9 Cine Lock Quick Release Mounting Device
The 16x9 Cine Lock Quick Release Mounting Device consists of two parts that each attach to separate pieces of equipment and then lock into one another, and at the slide of a pin they unlock and separate from each other. Thus they provide quick-release functionality between cameras and accessories, and can be used with most any 1/4 or 3/8 gear.
The two parts are a burgundy wedge and a gray plate. They each attach onto a piece of equipment regardless of whether the equipment has a stud or a screw-hole as its mounting option. Both parts have to them two different-sized screw-holes. Via one of the two, each part either screws onto a stud, or -- by means of one of three screws that come included with the Cine Lock -- gets fastened to a screw-hole of a piece of equipment. The screw-holes of the wedge and plate are of 1/4 and 3/8 sizes, and the included screws are of the same sizes.
Provides quick-release functionality with most any 1/4 or 3/8 equipment.
Screws onto a stud or gets fastened into a screw-hole by means of included screws.
Consists of two components. One slides and locks into the other, and a slide of a pin unlocks them.
Noga NF9038CA CineArm NF (Small) Specs
| Arm | Top: Male 1/4"-20 plus nut Bottom: Male 3/8" |
| Extended Length | 5.0" (12.7 cm) |
| Maximum Load Capacity | 7.2 lb (3.3 kg) |
| Weight | 0.6 lb (0.3 kg) |
Packaging Info
| Package Weight | 0.63 lb |
| Box Dimensions (LxWxH) | 6.6 x 2.95 x 1.7" |
16x9 Cine Lock Quick Release Mounting Device Specs
| Thread Size | 1/4" and 3/8" |
| Weight | 1.8 oz (51 g) |
Packaging Info
| Package Weight | 0.15 lb |
| Box Dimensions (LxWxH) | 2.3 x 2.3 x 0.3" |
In the Box
- 2-Year Manufacturer Warranty
- 1/4"-20 Screw
- 1/4"-20 Socket Set Screw
- 3/8" Socket Set Screw
- Washer
- 2-Year Manufacturer Warranty
No posts found
