SHAPE ICON2 Overview
The Wireless Director s Kit from SHAPE is based on a universal bracket system that will secure the position of your monitor with a 1/4" -20 captive screw. The monitor support allows the possibility to install a Paralinx or Teradek wireless data receiver and a Gold Mount or V-Mount battery plate. It can also be installed on a gobo stand to keep your setup in the same place. The monitor position can be rotated forward and backward using a red ratchet key (sold separately) to secure the position.
Behind the monitor, there is an included universal cheeseplate with 1/4" -20 and 3/8-16 threaded holes. The cheeseplate can move forward and backward with the red knob screw to provide an easy access to the battery rear connectors of the monitor. This bundle includes a pair of handle with push button technology allowing 360° rotation. With this technology, the handles can be easily placed up or down with a simple press of your thumb, and you can position it backward so the monitor can easily hold on a flat surface. The handles are attached to the monitor support with SHAPE standard ARRI rosette place on each side of the monitor support. It includes a strap made of rubber and nylon to provide you a better support and to increase the security for the monitor.
Compatibility
SmallHD, Atomos, TV Logic, ikan, Sony, Ikegami, Asto Design, Liliput, Sound Devices, and other monitors with threaded holes underneath
General
Based on a tension system to move the monitor bracket and the cheeseplate forward or backward to adjust the monitor position
Red ratchet key to secure the lock of the bracket and the cheeseplate position
Includes a spigot with rubber plug
Two 1/4" -20 captive screws to secure the monitor position on the angle bracket
Threaded holes pattern for Gold Mount and V-Mount battery plate (sold separately)
Includes a universal cheeseplate with 1/4" -20 and 3/8" -16 threaded holes
Cheeseplate can move forward and backward using a red knob for easy access to the batteries rear connectors of the monitor
Paralinx or Teradek wireless data receiver can be installed on the cheesplate behind the monitor
Can be combined with a Gold Mount or V-Mount battery plate
Includes a pair of handles with push button technology and SHAPE red ratchet key for fast and easy adjustment
Handles are attached with SHAPE standard ARRI rosette on each side on the monitor support and can be placed up and down with 360° rotation
Handles can be positioned backward for a desktop configuration and can easily hold on to a flat surface
Includes a strap with rubber padding for good grip and better support
Universal bracket for monitors between 7 and 9"
EAN: 629266005286
SHAPE ICON2 Specs
Key Specs
Mounting | Monitor Mount: 2x 1/4"-20 Male Screw Accessory Mount: Multiplex 1/4"-20 Female Thread, Multiplex 3/8"-16 Female Thread Handle Mount: 1x ARRI Rosette with M6 Female Thread |
In the Box
- SHAPE Wireless Director`s Kit
- Cheeseplate with 1/4"-20 & 3/8"-16 Threaded Holes
- Cheeseplate with Handle
- 2 x Handle
- Strap
- Lifetime Manufacturer Warranty
No posts found