EAN: 046838074790
The JVC DT-V24G2Z 24` 10-Bit Studio LCD Monitor features a 10-bit panel and wide gamma range, making it suitable for critical image evaluation. The monitor is fully capable of displaying 1920 x 1200 signals, and offers a contrast ratio of 1500:1. It also offers wide viewing angles of 178°/178° and a brightness rating of 400 cd/m2.
The studio monitor supports EIA/CEA-708 and EIA/CEA-608 SDI closed captioning standards. It comes with a built-in stereo speaker and a tiltable stand with two-way installation capability.
10-bit IPS panel with 1.073 billion color reproduction
1500:1 contrast ratio
WUXGA resolution: 1920 x 1200 pixels
Built-in histogram, waveform, vectorscope, and zebra pattern
Built-in audio level meter, up to 16 channels
Lissajous audio metering
Four gamma preset modes
Wide array of markers and indicators
Two 3G-SDI and dual-link inputs
IMD (In-Monitor Display)
EBU 100% equivalent color spectrum
Optimized I-P conversion
Color temperature settings: 9300K, 6500K, 5600K, or User mode
IP modes: Normal, Field, and Cinema (24p)
Pixel-by-pixel (1:1) display
Timecode display (SDI)
JVC DT-V24G2Z Specs
Monitor Type | Multi-format LCD monitor |
Screen Size | 24" (61 cm) measured diagonally |
Resolution | 1920 x 1200 |
Display Colors | 1.073 billion |
Viewing Angle | 178° / 178° (H / V) |
Brightness | 400 cd/m2 |
Contrast Ratio | 1500:1 |
Signal System | Not specified by the manufacturer |
Response Time | Not specified by the manufacturer |
Aspect Ratio | 16:10 |
LCD Panel | 24" (61 cm) diagonal, active matrix TFT |
Effective Screen Size | W x H: 20.4 x 12.8" (51.8 x 32.4 cm) |
Standards | 3G-SDI (Ready): SMPTE 424M / SMPTE 425M; dual-link HD-SDI (Ready): SMPTE 372M HD-SDI: BTA S-004C, SMPTE 292M SD-SDI: ITU-R BT.656 (525 / 625), SMPTE 259M (525) Embedded Audio: SMPTE 299M, SMPTE 272M |
Audio Output | Internal: 1 W + 1 W (L/R) |
Energy Efficiency Class | C |
Rated Current | North America: 0.72 A (120 VAC) Europe: 0.42 A (220 to 240 VAC) |
Video I/O | In 1: 3G/HD/SD-SDI In 2: 3G/HD/SD-SDI (compatible with embedded audio/dual-link signals; auto detection) 2 x Lines 2 x BNC connector 1 x HDMI In (compatible with HDCP) 1 x Component In: Y: 1 Vpp, 75 Ohms (with sync) PB/B-Y, PR/R-Y: 0.7 Vpp, 75 Ohms 1 x Composite Input/Output 2 x BNC, 1 Vpp, 75 Ohms ((In and Out are connected with a bridge connection; auto termination) Out 1: 3G/HD/SD-SDI (compatible with embedded audio signals) 1 x Line, BNC connector Out 2: 3G/HD/SD-SDI (switched out; compatible with embedded audio signals) 1 x Line, switched out 1 x BNC connector |
Audio I/O | In 1: 2 x Analog signal lines 2 x RCA connectors 1 x 3.5 mm stereo mini jack In 2: 500 mV (rms), high impedance Output: Audio assign (monitor out) 1 x Analog signal line 2 x RCA, 500 mV (rms) |
External Control | Make/Trigger: RJ-45 RS-485: RJ-45 RS-232C: D-Sub (9-pin) |
Operating Temperature | 41 to 95°F (5 to 35°C) |
Storage Temperature | -4 to 140°F (-20 to 60°C) |
Operating Humidity | 20 to 80%, non-condensing |
Power Requirements | 120/220 to 240 VAC, 50/60 Hz |
Power Consumption | On: 38.9 W Standby: 0.29 W Annual Energy Consumption: 57 kWh/year |
Dimensions | With Stand: 22.3 x 17.7 x 9.6 " (56.4 x 44.9 x 24.3 cm) Without Stand: 22.3 x 16.1 x 3.9" (56.4 x 40.8 x 9.9 cm) |
Weight | With Stand: 23.4 lb (10.6 kg) Without Stand: 17.0 lb (7.7 kg) |
In the Box
- JVC DT-V24G2Z 24" 10-Bit Studio LCD Monitor
- Tilting Desk Stand
- AC Power Cord
- Power Cord Holder
- Core Filter
- 2 x Screw
- 2 Years Manufacturer Warranty
No posts found