Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Magewell Pro Capture DVI HD Capture Card (One Channel)
The Pro Capture DVI HD Capture Card (One Channel) from Magewell is a low-profile PCIe 2.0 x1 card that allows for capturing a single channel of DVI + audio, VGA + audio, Component + audio, or HDMI + embedded audio via the DVI input, 1/8 analog audio input, and supplied breakout cables. The card supports various color sampling modes, color depths, color formats, up to 8 audio channels at 48 kHz (HDMI only), and output resolutions up to 2048 x 2048 with frame rates up to 120 fps. The card is also capable of numerous video processing features, including cropping, scaling, de-interleaving, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition.
VGA & Component Input
HDMI Input
Video Processing
Multiple Cards per System
Multiple Output Streams
Ultra-Low Latency Support
Timestamp & AV Synchronization
Video Output SG-DMA
SDK
Windows Driver Tweaks
Firmware Upgrade
The Pro Capture DVI HD Capture Card (One Channel) from Magewell is a low-profile PCIe 2.0 x1 card that allows for capturing a single channel of DVI + audio, VGA + audio, Component + audio, or HDMI + embedded audio via the DVI input, 1/8 analog audio input, and supplied breakout cables. The card supports various color sampling modes, color depths, color formats, up to 8 audio channels at 48 kHz (HDMI only), and output resolutions up to 2048 x 2048 with frame rates up to 120 fps. The card is also capable of numerous video processing features, including cropping, scaling, de-interleaving, aspect ratio conversion, color format conversion, video frame rate conversion, and video OSD composition.
Pro Capture DVI supports multiple cards per system and unlimited output streams for any one input channel with independently adjustable parameters per stream. Additional features include ultra-low latency, timestamp and A/V synchronization, and LED status indicators. The card supports both Windows, Mac, and Linux operating systems, with multiple APIs for Windows and Linux, and with Windows SDKs for easier integration.
General
- Supports auto scanning of video input sources when there is no signal input to the currently selected input source
- Supports manual selection of video input source, auto selection of linked (embedded) audio input source when the video input source changes, and manual selection of audio input source
- Supports standard crossbar based on video input source selection
- Supports input video resolutions up to 2048 x 2048
VGA & Component Input
- 12-bit ADC
- Supports RGB & YCbCr (YUV) color formats
- Supports separated sync, composite sync, sync-on-green (SOG), and sync-on-luminance (SOY)
- Supports DMT, CEA, CVT, GTF video timings
- Input signals up to 165 MHz pixel rate are digitized with 1:1 sampling whereas signals over 165 MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss not officially supported)
- Auto detection of RGB & YCbCr color formats
- Auto or manual sampling phase adjustment
- Auto horizontal alignment
- Supports customized video timings
- Supports customized video resolutions for CVT/GTF timings
HDMI Input
- 225 MHz HDMI receiver
- Adaptive HDMI equalizer support for cables lengths up to 98
- Supports customized EDID
- Supports extraction of AVI/Audio/SPD/MS/VS/ACP/IRSC1/ISRC2/Gamut InfoFrames
- Full colorimetry support
- Supports 8/10/12-bit color depths
- Supports RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Supports up to 8-channel IEC60958/IEC61937 audio streams
- Supports extraction of audio formation information & channel status data, video timing, 3D format information, and Sony/Canon DSLR time code
Video Processing
- Two video processing pipelines with approximately 180MP/s processing bandwidth for each
- Supports full 10-bit video processing
- Video cropping and scaling
- Video de-interlacing: weave, blend top & bottom field, top field only, bottom field only
- Aspect ratio conversion with automatic or manual selection of input and output aspect ratios
- Three aspect ratio conversion modes: ignore (anamorphic), cropping, or padding (letterbox or pillarbox)
- Supports video frame rate conversion
- Supports automatic and manual selection of input/output color formats and quantization ranges, and output saturation range
- Supports RGB, YCbCr 601, YCbCr 709, and YCbCr 2020 color formats
- Supports limited or full quantization range
- Supports limited, full, and extended gamut saturation range
- Supports PNG OSD image of up to 2048 x 2048
- Supports dynamic loading of RGBA OSD image via SDK
Multiple Cards per System
- Supports multiple cards in one system
- On-board rotary switch to set card number, with 16 positions from 0 to F
- System hardware device tree will display œ01: Pro Capture AIO ? when rotary switch is set to 1, and so on
- The video and audio device names displayed in your software will include the card number (set by the rotary switch)
Multiple Output Streams
- Unlimited output streams for any one input channel
- Independent cropping, aspect ratio, color format, resolution, frame rate, de-interlacing, and color adjustment settings for each individual stream
Ultra-Low Latency Support
- Latency of 64 video lines
- Partial notification mode in SDK
Timestamp & AV Synchronization
- Hardware-based 100ns high-resolution clock
- Audio frames (192 audio samples) & video frames are stamped with hardware clock
- Hardware clock can be synchronized across cards (via SDK)
Video Output SG-DMA
- Supports auto detection of Intel tiled GPU surface
- Supports DirectGMA for AMD video adapter chipsets
- Supports GPUDirect for NVIDIA video adapter chipsets
- 400 MB/s per channel DMA bandwidth in PCIe 2.0 system
200 MB/s per channel DMA bandwidth in PCIe 1.0 system
SDK
- Pro Capture SDK for DirectShow for easy integration (Windows)
- Pro Capture SDK for DirectKS for maximum flexibility & performance (Windows)
Windows Driver Tweaks
- All options can be controlled by three levels of registry key: global level, product level, and device level
- Video, audio, crossbar filter names can be customized via registry keys
Firmware Upgrade
- Multiple cards in one system can be upgraded simultaneously
- Cards can be upgraded without a system power shutdown when it is not in use
- Supports Safe upgrade
- If power off or system break down occurs when the firmware is being upgraded, it will automatically restore to the initial version (only available for firmware version 1.21 and above)
Magewell Pro Capture DVI Specs
| Input Interface | 1 x DVI (DVI 1.0) HDMI 1.4a via breakout VGA via DVI2VGA connector Component via breakout 1/8" (3.5 mm) Phone Jack: Line in |
| Output Interface | PCIe Gen2 x1 |
| Supported OS | Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64) Linux (based on V4L2, supports x86, x64 & arm architecture) Mac OS X |
| Supported APIs | Windows: DirectShow, DirectKS, Wave API/DirectSound/WASAPI Linux: V4L2, ALSA |
| Supported Software | VLC, VirtualDub, OBS, xSplit, vMix, VidBlaster, Wirecast, Microsoft Media Encoder, and Adobe Flash Media Encoder Any other DirectShow/V4L2 encoding/streaming software |
| Video Output Format | Supports output image resolutions up to 2048 × 2048 pixels Supports output frame rates up to 120 fps (actual output frame rate can be limited by PCIe bandwidth, and at higher image resolutions; above 1280 × 1024) Supports 4:2:0 8-bit output formats; NV12, I420, YV12 Supports 4:2:2 8-bit output formats; YUY2, YUYV, UYVY Supports 4:4:4 8-bit output formats; V308, IYU2, V408, BGR24, BGR32 Supports 4:4:4 10-bit output formats: V410, Y410 More output formats are supported via Pro Capture SDK for DirectKS |
| Video Output SG-DMA | 400 MB/s per channel DMA bandwidth in PCIe 2.0 system 200 MB/s per channel DMA bandwidth in PCIe 1.0 system |
| LED Indicator | Status LEDs indicate the working state of each channel; idle, input signal locked, memory failed or FPGA configuration failed |
| Power Consumption | Max Current at 12 V: 0.4 A approximately Max Current at 3.3 V: 0.2 A approximately Max Power Consumption: 4.7 W approximately |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -4 to 158°F (-20 to 70°C) |
| Relative Humidity | 5 to 90% non-condensing |
| Form Factor | Low profile PCIe x1 add-on card 3.7 x 2.7" (92.76 x 68.88 mm) without PCI bracket |
In the Box
- Magewell Pro Capture DVI HD Capture Card (One Channel)
- DVI2VGA Connector
- DVI-I to HDMI + Component Breakout
- Low Profile Bracket
- 2 Years Manufacturer Warranty
No posts found
