Switchblade Systems Mobile Production Cart Tier 2 Bundle

Add a full-featured mobile production cart to your broadcast or live stream production with this Mobile Production Cart Tier 2 Bundle from Switchblade Systems. The kit includes the MPC production cart, a Switchblade LPU4 8 x SDI production video switcher, a preinstalled copy of vMix 4K, the VMC12 vMix control surface, a 16-port Gigabit network switch, three PTZCam UV510A PTZ cameras with 20x zoom, one PTZCam View IP PTZ controller, and a 32" monitor mounted into a monitor case.

The 30" wide, heavy-duty cart features a flip-up monitor lid, 16 RU rack space, 2 RU operator space, 2 RU side rails, 8" locking swivel wheels, a locking side table, a 4 RU storage drawer, and a 20-port AC distribution unit.

Switchblade Systems vMix 4K 8 x SDI Input Switcher System (4 RU)

The vMix 4K 8 x SDI Input Switcher System from Switchblade Systems provides a full-featured SDI broadcast switching system with vMix 4K installed on a Windows 10 system in a 4 RU rack-mountable chassis. The system features eight SDI inputs and runs the software on an Intel Corei9-10900X 3.3 GHz 10-core processor, a 1TB internal SSD, 16GB of RAM, Nvidia 3070 RTX graphics card, Gigabit Ethernet, and four hot-swap 2.5" SSD bays.

Switchblade Systems VMC12 Control Panel for vMix and Blackmagic Design ATEM

Control your vMix-based software switcher or Blackmagic Design ATEM with the VMC12 Control Panel for vMix and Blackmagic Design ATEM from Switchblade Systems. Designed with bright LED backlit buttons and a professional T-bar that facilitates common commands, including crossfades, wipes, digital video effects, and downstream keying, the VMC12 is an ideal companion to any Switchblade system and is suited for experienced and novice users alike. Connect an optional Ethernet cable to it from your computer and the VMC12 perfectly integrates with the functions of vMix software and Blackmagic Design ATEM systems, and that same cable can even provide power to the unit using PoE (Power over Ethernet) technology.

vMix-Specific Functions

• Connection Methods: IP connection via RJ45 LAN (POE 802.3af supported) and USB 2.0 cable direct connection
• Input Control: 12 channel preview/program
• Transitions: 4 transitions mappable to buttons
• Overlays: 4 overlay channels (R1 / R2 / R3 / R4)
• Playback Control: 2 playback channels (M1 / M2)
• Other Controls: Record, Stream

ATEM-Specific Functions

• Connection method: IP connection via RJ45 LAN (POE 802.3af supported)
• Input control: 12 channels
• Transition effects: 5 transition buttons (mix / dip / wipe / sting / DVE)
• Upstream keyer control: 4 key buttons (background / key 1 / key 2 / key 3 / key 4)
• Downstream keyer control: 2 DSK buttons
• FTB: supported
• Preview transition: supported
• Macros: supported
• S/SRC: supported
• M/E: supported
• AUX: supported

EAN: 601946495402

PTZCam UV510A HDMI/3G-SDI/NDI HX PTZ Camera with 20x Optical Zoom

Add a camera to your conference room for remote meetings with software such as Skype, Microsoft Teams, or Zoom with this UV510A HDMI/3G-SDI/NDI PTZ Camera with 20x Optical Zoom from PTZCam. The PTZ camera features resolutions up to 1080p60, a 1/2.8" HD CMOS sensor, and an integrated 20x optical zoom lens to capture crisp imagery for your classroom, meeting room, or web conference. The camera offers multiple video output options including HDMI, 3G-SDI, RJ45 Ethernet RTSP streaming, and NDI|HX low-bandwidth, high-quality streaming.

In addition to HDMI and SDI output up to 1080p60, the camera will fit seamlessly into your NDI network and communicate with other NDI applications and hardware. You can set the camera to rapidly move between positions using IP RS-485, or RS-232 control with separately available controllers, and it also supports cascading over RS-232. The camera supports H.264 compression and it transmits IP video streams using ONVIF, RTSP, and RTMP protocols. The camera features a 3.5mm analog audio input and it supports AAC, MP3, and PCM audio compression and embedding over HDMI, 3G-SDI, and NDI|HX.

Applications

Tele-education, lecture capture, webcasting, videoconferencing, tele-training, telemedicine, interrogation, and emergency command systems

High-Definition Image

Employs 1/2.8" high-quality CMOS sensor with resolutions up to 1920 x 1080p60

Leading Autofocus Technology

Leading autofocus algorithm makes the 20x optical zoom lens a fast, accurate, and stable auto-focusing

Low Noise and High SNR

Low-Noise CMOS effectively ensure high SNR of camera video, while advanced 2D/3D noise reduction technology is also used to further reduce the noise, ensuring image sharpness

Audio Input Interface

One 3.5mm analog audio input, support for 16, 32, 44, and 48 kHz sampling frequency, and AAC, MP3, and PCM audio encoding

Quiet and Quick Pan/Tilt Mechanism

With its step-driving motor mechanism, the camera moves quietly and smoothly

A/V Compression

Support for H.264/H.264+ video compression AAC, MP3, and PCM audio compression

Multiple Network Protocol

Support for NDI|HX, ONVIF, RTSP, and RTMP protocols and supports RTMP push mode for streaming media servers (Wowza, FMS)

Serial Functions

Support for RS-232 and RS-485 serial protocols as well as RS-232 cascading

Low-Power Sleep Function

Supports low-power sleep/wake up and power consumption is lower than 400mW in sleep mode

EAN: 616050682389

PTZCam PTZ View IP Control Surface with Video Decoder

Control your PTZ cameras using IP communication with this handy PTZ View IP Control Surface with Video Decoder from PTZCam. The PTZ View offers 4D joystick and button control for up to 999 PTZ cameras with support for the VISCA control protocol over IP. It enables you to control the speed of your pan, tilt, zoom, and lock moves and incorporates a TFT LCD screen. It supports ONVIF communication standards, runs the open Linux operating system, and features built-in H.264/H.265 video decoders to view the active camera feed up to 1080p on the built-in 800 x 480 color display.

The controller offers camera select buttons, presets, knobs for pan/tilt/zoom speed control, iris buttons, and settings to control the finer settings on the PTZ cameras. It also features a key-touch beep feature that can be turned on and off. You can power the camera using a power adapter or via PoE (Power-over-Ethernet) on a supported network to save cable runs.

Features

4D pan/tilt joystick, button control, and color LCD screen

Control up to 999 PTZ cameras

Preview single camera on 800 x 480 TFT LCD screen using video decoder and ONVIF communication

Supports preview for up to 1920 x 1080 resolution

Control speed of pan/tilt and zoom in/out; control focus and iris

VISCA-over-IP communication protocol

Power-over-Ethernet (PoE) support or power via power adapter

Key-touch beep feature

EAN: 616050682341