Extend your transmission of HDMI UHD 4K60 video signals up to 393 using the 1x4 UHD 4K 18 Gb/s HDMI-over-HDBaseT Splitter/Distribution Amplifier from BZBGear. The kit includes a transmitter/splitter, four receivers, one power supply, and surface mounting hardware to fit these compact units easily into your A/V environment in a classroom, conference room, or event space.
The transmitter inputs a single HDMI video source up to UHD 4K60 from a computer, Blu-ray, camera, or other HDMI sources, and it splits and sends up to four simultaneous video signals via HDBaseT over Cat 7/6/6a cable up to 393 to each receiver. If transmitting up to 1080p60 video resolution, you can send the signal up to 492 over Cat 7/6/6a. The splitter also features an HDMI loop output for a local display, and it can de-embed audio to analog output for speakers. Each receiver also features analog audio output. The system supports RS-232 serial control, and it passes through IR remote control from the source to all destinations, so you can extend IR controls to each destination display. IR blasters and receiver cables are included for each unit.
The splitter features a power supply and provides power to the four receivers using Power-over-HDBaseT, so you don t need additional power supplies. The extender system supports advanced EDID management and HDCP 1.4/2.2. The front of the units feature LED status indicators for power, test, and link, and all the connectors are on the back.
Key Features
Distribute one HDMI source signal to any four HDMI display devices
Splitter features one HDMI input and four RJ45 HDBaseT outputs
Four receivers feature one HDBaseT input and one HDMI output to display
HDMI 2.0b, HDCP 2.2, and HDCP 1.x compliant
18 Gb/s video bandwidth
Video resolution up to UHD 4K60 4:4:4
HDR, HDR10+, HLG, and Dolby Vision support
Up to 7.1CH HD audio pass-through
Digital and analog audio de-embedded output
Extend HDMI signal transmission distance up to 393 at UHD 4K60 resolution and up to 492 at 1080p60 resolution via a single Cat 6/6a/7 cable
IR and RS-232 routed to HDBaseT control output
Advanced EDID management
One-way POC function (only from transmitter to receiver)
Compact design for easy and flexible installation
EAN: 850009357793
BZBGear BG-UDA Specs
Interfaces
| Input | 1 x HDMI (HDMI 2.0) Female |
| Embedded Audio | HDMI/LAN(RJ45) |
| Output | 1 x HDMI (HDMI 2.0) Female 4 x RJ45 (HDBaseT) Female 1 x RCA (Stereo Analog, Balanced) Female 1 x Block 5-Pin (Stereo Analog, Balanced) Female |
| Other I/O | 1 x 1/8" / 3.5 mm (IR) Input 1 x 1/8" / 3.5 mm (IR) Output 1 x Block 3-Pin (RS-232) Input/Output |
Standards
| HDR Compatibility | HDR10, HDR10+, Dolby Vision, Hybrid Log Gamma |
| HDCP Support | , Version 2.2 |
| EDID Support | Manual Control |
| Audio Decoding | DTS-ES, DTS-HD High-Resolution, DTS-HD Master Audio, DTS:X, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, LPCM, PCM |
Transmission
| Max Transmission Distance | UHD 4K: 393.7` / 120 m (via Cat 6/6a/7) 1080p: 492.1` / 150 m (via Cat 6/6a/7) |
| Video Format | HDMI (8/10/12-Bit 4:4:4/4:2:2/4:2:0 RGB, YUV) UHD 4K: 60 fps 1080p: 60 fps |
| Maximum Data Rate | 18 Gb/s |
Power
| Power Connector | 1 x Barrel (24 VDC at 2.7 A) Input |
| Power Consumption | Device: 100 to 240 VAC (35 W) |
| ESD Protection | ±8 kV Air-Gap Discharge ±4 kV Contact Discharge |
Environmental
| Operating Temperature | 32 to 72°F / 0 to 40°C |
| Storage Temperature | -4 to 140°F / -20 to 60°C |
| Operating Humidity | 20 to 90% |
General
| Dimensions | 8.7 x 5.1 x 1.6" / 220.0 x 130.0 x 40.0 mm |
| Weight | 1.9 lb / 853 g |
Packaging Info
| Package Weight | 6.96 lb |
| Box Dimensions (LxWxH) | 17.7 x 11 x 4.1" |
In the Box
- BZBGear 1x4 UHD 4K 18 Gb/s HDMI-over-HDBaseT Splitter/Distribution Amplifier
- Transmitter/Splitter
- 4 x Receiver
- 5 x IR Blaster Cable (4.9`)
- 5 x IR Receiver Cable (4.9`)
- 5 x 3-Pin Phoenix Connector
- 5-Pin Phoenix Connector
- 10 x Mounting Ear
- Locking Power Adapter
- 3-Year Manufacturer Warranty
No posts found
