The QMOD-HDMI RGB HDTV Modulator from Contemporary Research features one non-encrypted HDMI and one RGBHV/component inputs, making it suitable for sports, motion, and digital signage encoding. Dual hardware scalers accept content up to 1080p, shapes VGA signage for edge-to-edge presentation, and compensates for non-broadcast and PAL refresh rates. With ability to deliver two HD programs in one channel, the QMOD-HDMI 1.5 can also output the content as a multicast or unicast IPTV stream.
The modulator comes with dual-language SAP audio, easy front-panel setup, and alternate audio and NTSC video inputs. Web setup, monitoring, and firmware updates are available via USB and Ethernet ports. Two-across mounting offers up to four programs per rack space and the ability to mix models to handle HDMI, SDI, Component, RGBHV, and NTSC video sources. The version 2.3.4 update reduces end-to-end RF latency to 500 ms and adds RTP protocol for IP streaming.
Sources
One HDMI (non-HDCP) input, up to 1080p video and audio
One RGBHV/Component input, up to 1080p video
Two Composite video inputs for encoding, captioning, or EAS use
Encoding
Creates SD and high-definition MPEG-2 and/or H.264 streams at 480i, 480p, 576i, 720p, or 1080i for distribution
Accepts stereo or PCM audio and converts to Dolby Digital AC-3 with SAP dual-language capability
Converts PCM or MPEG1, Layer 2 audio to stereo AC-3, AAC or MP12, and pass-through AC-3
Embedded captioning from Line 21 data on composite video inputs
Dual hardware scalers enable precise formatting of digital signage for edge-to-edge presentation.
Accept up to 1080p 30/60 Hz and PAL video as well as various computer graphics resolutions while delivering programs at a fixed resolution
Dual-channel operation is standard
Creates one physical channel with two HD programs
Output
Delivers a fully agile QAM 64/256 digital cable channel 2-135
Up to 268 HD Programs and 134 channels per system
Streams multicast or unicast IPTV from GigE Ethernet port
Distributes channel over an onsite broadband cable system with adjustable output level up to 29 dBmV
Operation
Setup with front-panel buttons and easy to use menus, including inputs, encoding, channel, and RF options or use onboard web page for setup and monitoring
Update firmware from USB or Ethernet
Fan cooled with variable speeds
Includes compact switching power supply
Saves power and rack space using 1/2 rack width design
Can be mounted on the optional 1RU single (RK1) or dual (RK2EZ) 19` rack mount kits
Scaling
Accepts 480i to 1080p video and various computer graphics resolutions
Edge to edge presentation with zoom, shrink, and X/Y axis positioning
Native or scales to fixed output resolution, 1080p scaled to 1080i
Contemporary Research QMOD-HDMI Specs
Encoding | MPEG2/H.264 Profile: for HD, for SD 1080i, 720p, 576i, 480p, and 480i output resolution MPEG2 Video Encoding Bitrate 10 to 25 Mbps, HD, 5 to 6 Mbps 480i, variable bitrate if set for IP output only H.264 Video Encoding Bitrate 5 to 10 Mbps, HD, 2 to 4 Mbps 480i, or variable bitrate if set for IP output only |
Modulation | Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1) MER: 38 dB typical |
Compliance | FCC Class B, RoHS, meets California energy standards |
Front Panel | Menu Setup with front panel Select and Directional buttons Menu LCD, Blue with 2 lines of 20 white characters each |
Power Connector | 2.1 mm coaxial jack (inside center conductor positive) |
Power Requirements | 1.1 A maximum, 11.5 to 13.5 VDC |
Output Voltage | 12 VDC typical |
EAS Looped Output | 3 GPI pins for latching control |
Closure | SW (NO) for Closure: V+, 5 to 12 VDC, Ground |
Ethernet | RJ-45 GigE Ethernet connector |
HDMI Input | 1 x HDMI, up to 1080p, as well as, various computer graphics resolutions |
Component Input | 1 x RGBHV/Component input up to 1080p as well as various computer graphics resolutions |
Composite Video | RCA female /PAL, also used for Line 21 captioning data |
Audio | 2 x Digital SPDIF Coax RCA jacks, PCM/AC-3, 48/44.1K sample rate Stereo Audio: 2 x stereo analog 3.5 mm inputs |
RF | F, female, 75 Ohms impedance |
Channels | Agile: 2 to 135 (57 to 861 MHz), standard, HRC, or IRC spacing Channels per System: 134 |
Programs | HD Programs: 268 |
Bandwidth | 6 MHz, fits any open channel without interference to adjacent channels |
Resolution | 1 kHz |
Accuracy | +/- 30 ppm |
Stability | +/- 35 ppm |
Output Power | 29 dBmv, attenuated in 5 steps, approximately 4 dB |
Compliance | FCC Class B, RoHS, California energy standards |
Operating Temperature | 32 to 122°F (0 to 50°C) |
Dimensions | 8.5 x 1.73 x 6" (216 x 62 x 153 mm) |
Weight | 1.5 lb (0.68 kg) |
In the Box
- Contemporary Research QMOD-HDMI RGB HDTV Modulator
- PS12-2 Switching Power Supply
- Standard AC Cord for Power Strips
- HD15 to RCA Component Breakout Cable
- 3.5mm to 2-RCA Audio Cable
- 2-Year Manufacturer Warranty
No posts found