ZeeVee HDbridge 2312 12-Channel Audio/Video to HD Digital Encoder QAM Modulator
EAN: 812254010564
The HDbridge 2312 12-Channel Audio/Video to HD Digital Encoder QAM Modulator from ZeeVee is designed to encode and modulate 12 SD standard definition audio and video inputs to a single QAM RF coaxial output. This encoder can be connected to any RF systems with HDTV monitor equipped with a digital tuner. The modulator is setup via a web browser which enables you to customize your system. The HDbridge 2312 distributes high density video and digital signage with its 12 SD channels and composite video inputs. It features a 480i or 576i video resolution and analog audio is internally encoded and broadcast as Dolby AC3. This unit features integrated closed caption support and uses AV cables (not included). This unit is rackmountable.
Full MPEG2 implementation
I, P, and B Frames
Low latency
Full motion estimation with a wide search range
Intuitive web interface
On-site or remote management
Web accessible instrumentation and management
Single session configures and manages all connected units
Front Panel Display for on-site status and management at a glance
Forced air cooling for effective thermal control
Easy downloadable firmware updates
Emergency Alert System (EAS)
Bonus information channel for use with small video loops
EAN: 812254010564
The HDbridge 2312 12-Channel Audio/Video to HD Digital Encoder QAM Modulator from ZeeVee is designed to encode and modulate 12 SD standard definition audio and video inputs to a single QAM RF coaxial output. This encoder can be connected to any RF systems with HDTV monitor equipped with a digital tuner. The modulator is setup via a web browser which enables you to customize your system. The HDbridge 2312 distributes high density video and digital signage with its 12 SD channels and composite video inputs. It features a 480i or 576i video resolution and analog audio is internally encoded and broadcast as Dolby AC3. This unit features integrated closed caption support and uses AV cables (not included). This unit is rackmountable.
Full MPEG2 implementation
I, P, and B Frames
Low latency
Full motion estimation with a wide search range
Intuitive web interface
On-site or remote management
Web accessible instrumentation and management
Single session configures and manages all connected units
Front Panel Display for on-site status and management at a glance
Forced air cooling for effective thermal control
Easy downloadable firmware updates
Emergency Alert System (EAS)
Bonus information channel for use with small video loops
ZeeVee HDB 2312 Specs
| Connectors | 1 x BNC, coaxial output 12 x RCA female, composite video input 12 x 3.5 mm phone jack, stereo audio input 1 x 3-pin phoenix male, event detection 2 x RJ45 Ethernet port 1 x 3.5 mm phone jack, EAS delay matched audio output 1 x IEC 60320-C14, power input |
| Controls | 4 x Navigation control 1 x OK |
| Composite Video Input | 75 „¦, 0 to 0.7 V per channel 480i input 59.94 fields per second |
| Closed Caption | EIA/CEA-608 captions accepted over composite video input |
| Stereo Audio Input | 75 „¦, 0 to 1.0 V per channel Internally encoded into Dolby Digital AC-3 |
| Encoder Video Profile | MPEG2 HD Profile 2: ISO13818-2 MP @ HL |
| Traffic Shaping | Variable Bit Rate |
| Video Transport Bit Rate | 38.78 Mbps |
| Data Rates | Variable, 2 Mbs to 12 Mbs per channel |
| Average Encoding Data Rate | 10 to 12 Mbs per channel |
| Encoding Latency | Programmable 100 msec to 400 msec |
| Color Profile | 4:2:0 |
| GOP Size | 24 |
| Video, Audio PID | Programmable |
| Program Information | Programmable |
| Encoder Audio Profile | ATSC A/52, Dolby(r) Digital (AC-3) |
| Modulation Type | QAM 256 (ITU-T J83 Annex B) Interleaving modes: (64,2) only |
| Cable Standard | HRC, IRC or STD or User defined |
| Frequency Range | 54 to 864 MHz (Channels 2-135) 2 kHz resolution ± 30 ppm accuracy ± 35 ppm stability |
| Output Power | +45 dBmV typical |
| Output Level Adjustment | 25 to 45 dBmV in 1 dBmV steps |
| MER | 40 dB typical |
| I/Q Amplitude Imbalance | < 1% typical |
| Spectral Tilt | <= 1dB over 6 MHz typical |
| Network Interface | 10/100 mb Ethernet via RJ45 connection IP address via DHCP or set by user HTML/Javascript served web interface for easy configuration Telnet connection for CLI scripting Easy firmware updates All settings saved in NV storage |
| Front Panel Color Display | View channel settings and audio/video utilization on full color LCD |
| Cooling | Dual Internal cooling fans, Front Inlet, Rear Exhaust |
| Vibration | NSTA 1A in carton |
| Mounting | Rack ears shipped attached, 1RU high |
| MTBF | 62,000 hours |
| Compliance | FCC Class A |
| Enclosure | Metal |
| Power | 100-240 VAC, 50/60 Hz |
| Power Consumption | 60 W maximum, 30 W typical |
| Dimensions | 1.7 x 17.3 x 6.9" (43.6 x 440.2 x 175.3 mm) |
| Weight | 6.5 lb (2.95 kg) |
In the Box
- ZeeVee HDbridge 2312 12-Channel Audio/Video to HD Digital Encoder QAM Modulator
- AC Power Cord
- 5-Year Manufacturer Warranty
No posts found
