Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
Barco MatrixPRO-II 32x32 Switcher with 3G SDI
The Barco MatrixPRO-II 32x32 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.
Agenlock input synchronizes all switching with the house sync. Auser-selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub-switchers and let each color channel switch independently.
Control can be by front panel buttons, by RS232, or via Ethernet connections. The switcher also fully integrates with Barco s Encore and ScreenPRO-II presentation systems and can be controlled through them.
32x32 Wideband Matrix Switcher
The Barco MatrixPRO-II 32x32 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.
Agenlock input synchronizes all switching with the house sync. Auser-selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub-switchers and let each color channel switch independently.
Control can be by front panel buttons, by RS232, or via Ethernet connections. The switcher also fully integrates with Barco s Encore and ScreenPRO-II presentation systems and can be controlled through them.
32x32 Wideband Matrix Switcher
- Delivers switching and distribution without any artifacts
- Agenlock input synchronizes all switching with the house sync
- Selectable RGB delay locks down-stream equipment to a new signal
- Presets are available to be stored and facilitate easy system reconfiguration
- I/O grouping and split-mode create sub-switchers and let each color channel switch independently
Barco MatrixPRO-II Specs
| Supported Formats | DVB-ASI, SMPTE 259M, SMPTE 292M, SMPTE 424M; 270M bps - 2.97Gbps; 2K, 2048x1556/23.98 and 24 |
| Inputs | |
| Standard | SMPTE 259M / SMPTE 292M / SMPTE 424M |
| Data Rate | 270Mbps - 1.485Gbps / 2.97Gbps |
| Connector | 75 ohm BNC female |
| Impedance | 75 ohm nominal |
| Return Loss | > 15dB (5MHz - 1.485GHz); > 10dB (1.5 - 3GHz) |
| Cable Equalization | Automatic up to 230` (70m) @ 2.97Gbps, typical Belden 1694A Automatic up to 328` (100m) @ 1.485Gbps, typical Belden 1694A Automatic up to 984` (300m) @ 270Mbps, typical Belden 8281 |
| Outputs | |
| Connector | 75 ohm BNC female |
| Impedance | 75 ohm nominal |
| Return Loss | > 15dB (5MHz - 1.485GHz); > 10dB (1.5 - 3GHz) |
| Signal Level | 800mVp-p ±10% |
| Rise & Fall | - 20 - 80% - SD limit: 0.4 - 1.5ns, < 0.5ns rise/fall variation - HD limit: < 270ps, < 100ps rise/fall variation - 3G-HD limit: < 135ps, < 50ps rise/fall variation |
| Amplitude Overshoot | < 10% |
| Signal Polarity | Non-inverting electrical with respect to inputs |
| Power & Other Parameters | |
| Power | 35W |
| Signal Speed | Timing jitter: SD: < 0.2 UI; 3G-HD/HD: < 1UI Alignment jitter: SD: < 0.2UI; 3G-HD/HD: < 0.2UI |
| Safety Regulations | Compliant with CE EN55103-1 and 2 |
| Control | Serial port: RS-232, DB9 connector female Ethernet port: 10/100BaseT Ethernet bus, 1x RJ45 connector |
| Rack Mount | 2RU |
| Dimensions | 3.5 x 19 x 2" (8.8 x 48.3 x 5 cm) |
| Weight | 4.8 lbs (2.2 kg) |
In the Box
- Barco MatrixPRO-II 32x32 Switcher with 3G SDI
- 3-Year Parts and Labor Warranty
No posts found
