The from Matrix Switch has 16 inputs and 16 outputs. It provides re-clocking for standard 3G/HD/SD rates with automatic bypass for non-standard rates between 20 Mb/s and 3 Gb/s and pass all SDI embedded audio/ancillary data. The switcher supports output mute. Switch on vertical sync is provided with the sync reference input with a pass-through connector and provides support for tri-level sync and NTSC/PAL black burst signals.
The routing switcher features several options for control and system integration. A built-in webpage interface offers a convenient method for control and configuration using a PC or mobile device (Interactive Demo). In addition to the MASCOT protocol, there is also support for some common 3rd party protocols.
Additional control interfaces on this router include USB, RS-485, RS-232, AUX GPIO, and TCP/IP over the Ethernet interface. Remote Panels can also be used with this router for remote control up to a virtually unlimited distance over TCP/IP. In addition, the switcher features a panel with status lights.
Re-clocks standard SDI rates 3G (2.97 Gb/s), HD (1.484 Gb/s), and SD (270 Mb/s)
Auto bypass of non-standard SDI rates from 20 Mb/s to 3 Gb/s
Passes SDI embedded audio and ancillary data
Different SDI rates can be used on different inputs without any restriction
Additional audio level can be connected to the D25 connector (sold separately) with break away from SDI support
Inputs can be switched to multiple outputs without restrictions
Outputs can be individually muted
Vertical interval switching using vertical sync input (Tri-level sync or NTSC/PAL black burst)
Store and recall up to 10 preset salvos
Includes a panel with status lights
Supports Matrix Switch Remote Panels
Ethernet port for control via built-in webpage interface or TCP/IP ports
Interactive webpage interface (Interactive Demo)
Serial control via RS-232 port
RS-485 port for an additional high-speed, long-distance capable control interface
Support for some common 3rd party protocols for added integration flexibility
Auxiliary port for external status and control signaling
No posts found