AJA OG-HI5-12G Overview
Monitor your HDR camera feed on a 4K monitor when using an openGear frame with this OG-Hi5-12G OpenGear 4K/UHD 12G-SDI to HDMI 2.0 Converter from AJA. This card installs into an openGear frame and provides video input via a 12G-SDI source and outputs via HDMI for viewing on a 4K monitor. It can also utilize a separately available fiber transmitter, receiver, or transceiver SFP module for long-distance feeds.
The card also features a 12G-SDI loop output for confidence monitoring or for viewing on other monitors. Other features include reclocking, HDR10 support, HFR support, HLG over HDMI, and 12-bit workflows. The card can be managed and controlled using the Ross DashBoard software.
Quick Features
- Pristine image fidelity and HFR support up to 60p for 4K/UHD 12G-SDI to HDMI 2.0 conversion with a single cable
- Supports 12-bit workflows
- Generates HDR10 metadata in accordance with HDMI v2.0b/CTA-861-G and supports HLG over HDMI
- Provides a monitoring connection from professional 4K devices using 12G-SDI over coaxial or separately available SFP Fiber module output
- 12G-SDI single link input with a reclocked SDI loop out for SDI monitoring or pass on for SDI pipelines
- Monitor and control via Ross DashBoard software
HDR
HDR (High Dynamic Range) provides the ability to display a wider and richer range of colors, much brighter whites, and much deeper, darker blacks than standard signals allow. This gives your imagery a more dynamic look and allows for natural true to life colors to be communicated to your audience.
The OG-Hi5-12G and family provide support for your 4K/UHD/HD HDR pipelines to HDMI compatible displays by generating HDR metadata in accordance with HDMI v2.0b/CTA-861-G. The OG-Hi5-12G also provides support for Hybrid Log Gamma (HLG) HDR displays over HDMI.
4K and UHD
Typical 4K signals use a resolution of 4096 x 2160 pixels while UHD signals measure 3840 x 2160. This difference can prevent some monitors from being used either in full 4K workflows or in UHD workflows. The OG-Hi5-12G can compensate for these resolution differences, allowing UHD monitors to be used in 4K productions and vice versa.
OG-Hi5-12G also supports High Frame Rate (HFR) inputs. UHD 4K signals at 50 or 60 fps can be fed into OG-Hi5-12G and output at up to 60p for viewing with appropriate HDMI 2.0 capable displays.
12G-SDI Support
The 12G-SDI input on the OG-Hi5-12G allows extremely high-quality signal representation through to the HDMI output for use with large raster and deep color workflows where image quality is critical.
Audio Integration
Up to 16-channels of embedded SDI audio are supported on input and can be passed to 8-channel of embedded HDMI audio on the output with the ability to delay the audio from 0 to 7 frames for proper synchronization with the output video.
openGear Compatibility
The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.
Flexible I/O
The included modular rear panel allows custom I/O connections per card.
Failsafe
The optional redundant power supply provides a secondary power source in the event of a primary power failure.
Ethernet Access
A standard Ethernet connection allows the frame to be accessed via the Ross Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.
EAN: 812321032734
AJA OG-HI5-12G Specs
Inputs / Outputs
Video Inputs | 1x BNC (12G-SDI) |
Audio Inputs | No |
Video Outputs | 1x HDMI (2.0b) 1x BNC (12G-SDI) (Loop Output) |
Audio Outputs | 2x Block 3-Pin Stereo |
Expansion Slots | 1x SFP Slot |
In the Box
- AJA OG-Hi5-12G OpenGear 4K/UHD 12G-SDI to HDMI 2.0 Converter
- 5-Year Manufacturer Warranty
No posts found