AJA OG-Hi5-12G-R OpenGear 4K 12G-SDI to HDMI 2.0 Converter Card with Fiber LC Connector

AJA OG-HI5-12G-R Overview

Monitor your HDR camera feed on a 4K monitor when using an openGear frame with this OG-Hi5-12G-R OpenGear 4K 12G-SDI to HDMI 2.0 Converter Card with Fiber LC Connector from AJA. This card installs into an openGear frame and provides video input via the LC fiber receiver or 12G-SDI from a 12G-SDI source and outputs via HDMI for viewing on a 4K monitor.

The card also features a 12G-SDI loop output for confidence monitoring or for viewing on other monitors. Other features include reclocking, HDR10 support, HFR support, HLG over HDMI, and 12-bit workflows. The card can be managed and controlled using the Ross DashBoard software.

Quick Features

• Pristine image fidelity and HFR support up to 60p for 4K/UHD 12G-SDI to HDMI 2.0 conversion with a single cable
• Supports 12-bit workflows
• Generates HDR10 metadata in accordance with HDMI v2.0b/CTA-861-G and supports HLG over HDMI
• Provides a monitoring connection from professional 4K devices using 12G-SDI over coaxial or Fiber LC outputs
• 12G-SDI single link input with a reclocked SDI loop out for SDI monitoring or pass on for SDI pipelines
• Ships with a Fiber LC single channel SFP receiver for extending 4K signals over long distances
• Monitor and control via Ross DashBoard software

HDR

HDR (High Dynamic Range) provides the ability to display a wider and richer range of colors, much brighter whites, and much deeper, darker blacks than standard signals allow. This gives your imagery a more dynamic look and allows for natural true to life colors to be communicated to your audience.

The OG-Hi5-12G and family provide support for your 4K/UHD/HD HDR pipelines to HDMI compatible displays by generating HDR metadata in accordance with HDMI v2.0b/CTA-861-G. The OG-Hi5-12G also provides support for Hybrid Log Gamma (HLG) HDR displays over HDMI.

4K and UHD

Typical 4K signals use a resolution of 4096 x 2160 pixels while UHD signals measure 3840 x 2160. This difference can prevent some monitors from being used either in full 4K workflows or in UHD workflows. The OG-Hi5-12G can compensate for these resolution differences, allowing UHD monitors to be used in 4K productions and vice versa.

OG-Hi5-12G also supports High Frame Rate (HFR) inputs. UHD 4K signals at 50 or 60 fps can be fed into OG-Hi5-12G and output at up to 60p for viewing with appropriate HDMI 2.0 capable displays.

12G-SDI Support

The 12G-SDI input on the OG-Hi5-12G allows extremely high quality signal representation through to the HDMI output for use with large raster and deep color workflows where image quality is critical.

Audio Integration

Up to 16-channels of embedded SDI audio are supported on input and can be passed to 8-channel of embedded HDMI audio on the output with the ability to delay the audio from 0 to 7 frames for proper synchronization with the output video.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The included modular rear panel allows custom I/O connections per card.

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Ross Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

EAN: 812321032741