AJA OG-Hi5-12G-TR OpenGear 4K/UHD 12G-SDI to HDMI 2.0 Converter with Fiber LC Transceiver

AJA OG-HI5-12G-TR Overview

Monitor your HDR camera feed on a 4K monitor when using an openGear frame with this OG-Hi5-12G-TR OpenGear 4K/UHD 12G-SDI to HDMI 2.0 Converter with Fiber LC Transceiver from AJA. This card installs into an openGear frame and provides video input from a 12G-SDI source and outputs via HDMI for viewing on a 4K monitor. The card also includes a fiber LC SFP transceiver module that allows you to receive a 12G-SDI source signal via fiber that outputs to HDMI, or it can pass a 12G-SDI signal through via fiber output for long-distance transmission.

The card also features a 12G-SDI loop output for confidence monitoring or for viewing on other monitors. Other features include reclocking, HDR10 support, HFR support, HLG over HDMI, and 12-bit workflows. The card can be managed and controlled using the Ross DashBoard software.

Quick Features

• Pristine image fidelity and HFR support up to 60p for 4K/UHD 12G-SDI to HDMI 2.0 conversion with a single cable
• Supports 12-bit workflows
• Generates HDR10 metadata in accordance with HDMI v2.0b/CTA-861-G and supports HLG over HDMI
• Features a 12G-SDI single link input with a reclocked SDI loop out and includes a fiber LC single-channel SFP transceiver which delivers a 4K/UHD SDI or Fiber source signal to an HDMI destination with pass on of the source through SDI or fiber to a secondary destination
• Simple monitoring connection from professional 4K devices using 12G-SDI outputs to displays with HDMI 2.0 inputs
• Ships with a fiber LC single channel SFP transceiver for extending 4K signals over long distances
• Monitor and control via Ross DashBoard software

HDR

HDR (High Dynamic Range) provides the ability to display a wider and richer range of colors, much brighter whites, and much deeper, darker blacks than standard signals allow. This gives your imagery a more dynamic look and allows for natural true to life colors to be communicated to your audience.

The OG-Hi5-12G and family provide support for your 4K/UHD/HD HDR pipelines to HDMI compatible displays by generating HDR metadata in accordance with HDMI v2.0b/CTA-861-G. The OG-Hi5-12G also provides support for Hybrid Log Gamma (HLG) HDR displays over HDMI.

4K and UHD

Typical 4K signals use a resolution of 4096 x 2160 pixels while UHD signals measure 3840 x 2160. This difference can prevent some monitors from being used either in full 4K workflows or in UHD workflows. The OG-Hi5-12G can compensate for these resolution differences, allowing UHD monitors to be used in 4K productions and vice versa.

OG-Hi5-12G also supports High Frame Rate (HFR) inputs. UHD 4K signals at 50 or 60 fps can be fed into OG-Hi5-12G and output at up to 60p for viewing with appropriate HDMI 2.0 capable displays.

12G-SDI Support

The 12G-SDI input on the OG-Hi5-12G allows extremely high-quality signal representation through to the HDMI output for use with large raster and deep color workflows where image quality is critical.

Audio Integration

Up to 16-channels of embedded SDI audio are supported on input and can be passed to 8-channel of embedded HDMI audio on the output with the ability to delay the audio from 0 to 7 frames for proper synchronization with the output video.

openGear Compatibility

The openGear standard ensures that AJA cards will be compatible with other openGear products from certified openGear partners. With a growing list of products, openGear is the future of rackframe products.

Flexible I/O

The included modular rear panel allows custom I/O connections per card.

Failsafe

The optional redundant power supply provides a secondary power source in the event of a primary power failure.

Ethernet Access

A standard Ethernet connection allows the frame to be accessed via the Ross Dashboard application for overall frame communication. Optional per-card Ethernet access can be installed in the frame for advanced communication with compatible openGear cards.

EAN: 812321032765