Shipping time and rates:
Shipping time and rates:
Sorry, we couldn't find any shipping options for your location. Please contact us, and we'll see what we can do about it.
Yes, we can ship to
United States
AJA SMPTE ST 2110 IP to SDI Mini-Converter
Decoding an HD SMPTE ST 2110 IP signal, the SMPTE ST 2110 IP to SDI Mini-Converter from AJA enables you to monitor and output SMPTE ST 2110 video (RTP) and audio (AES67) over 10 GigE network connectivity.
Featuring two 10 GigE SFP+ cages that support optional SFP+ modules of your choice, the converter allows you to connect an IP signal, which it decodes and formats for source monitoring and dual 3G-SDI output. Audio is output embedded as well as over L/R analog RCA jacks. The two SFP+ cages allow `hitless switching` so there`s no loss of frame synchronization in critical applications. The converter has a compact, rugged, and fanless design suitable for use in studio and in the field.
Key Features
Video Input IP
Audio Input IP
Video/Audio Output
Reference
Discovery, Registration, and Control
IP Clock
AJA Recommended 10 GigE SFP+ Modules
Decoding an HD SMPTE ST 2110 IP signal, the SMPTE ST 2110 IP to SDI Mini-Converter from AJA enables you to monitor and output SMPTE ST 2110 video (RTP) and audio (AES67) over 10 GigE network connectivity.
Featuring two 10 GigE SFP+ cages that support optional SFP+ modules of your choice, the converter allows you to connect an IP signal, which it decodes and formats for source monitoring and dual 3G-SDI output. Audio is output embedded as well as over L/R analog RCA jacks. The two SFP+ cages allow `hitless switching` so there`s no loss of frame synchronization in critical applications. The converter has a compact, rugged, and fanless design suitable for use in studio and in the field.
Key Features
- SMPTE ST 2110 audio and video receiver
- 2 x 3G-SDI outputs with mirrored source video
- Supports up to 1080p60, 10-bit, YCbCr 4:2:2 uncompressed
- Rugged, fanless design
- 2 x 10 GigE SFP+ cages with status lights for media LAN, allowing hitless switching (SFPs not included)
- 1 x 1 GigE RJ-45 port (with a status light) for control LAN - IEC 60603-7 for 10/100/1000 Base-T Ethernet (IEEE 802.3-2012)
- Full 10-bit pixel processing pipeline
- Embedded SDI audio output (up to 8 channels)
- L/R RCA analog audio output
- 1 x mini-USB 2.0 port (IEC 62680-1) for initial network configuration with AJA eMini-Setup software
- Complete control interface accessible on any Web browser from a built-in Web server
- Customizable control with AJA REST API
- HTTP/1.1 (RFCs 7230, 7231, 7232, 7233, 7234, 7235)
Video Input IP
- Single-channel video input
- SMPTE ST 2022-7 dual-stream input for hitless switching
- Rx support for narrow/wide, gapped/linear modes
Audio Input IP
- Up to 16 channels of audio, 24-bit per channel, 48 kHz synchronous (streams with up to 16-channels are received but only the first 8 are output)
- 1 ms or 125 Aµs packet interval
- SMPTE ST 2022-7 dual-stream input for hitless switching
Video/Audio Output
- 2 x 3G-SDI on BNC (single source, mirrored output)
- Up to 8 channels, SDI embedded audio, 24-bit per channel, 48 kHz synchronous
- L/R RCA analog audio levels at -10 dBu (nominal)
Reference
- 1 x BNC reserved for potential future updates
Discovery, Registration, and Control
- NMOS Rx discovery and control according to standards IS-04 v1.2 and IS-05 v1.0
- Ember+ control (no discovery, control only)
- AJA REST API control (discovery via SSDP or MDNS)
- Supported over dedicated management Ethernet port and in-band over media ports
IP Clock
- PTP support compliant with PTP PTPv2 / IEEE 1588-2008
- SMPTE ST 2059-1 compliant
AJA Recommended 10 GigE SFP+ Modules
- Arista Networks SFP-10G-SR Compatible 10GBASE-SR
- Fiberstore SFP-10GSR-85 10G SFP+ 850nm
- Finisar FTLX1471D3BCL (for single-mode 1310nm)
- Mellanox MFM1T02A-SR 850nm 10G
- Maximum supported SFP+ power is 500 mW per SFP+ cage
AJA IPR-10G2 Specs
Inputs / Outputs
| Video Outputs | 2 x BNC (3G-SDI) |
| Audio Outputs | 1 x 2RCA Stereo Analog |
| Other I/O | 1 x RJ45 1 x BNC Reference 1 x Mini-USB Firmware |
| Expansion Slots | 2 x SFP+ Slot |
Format Support
| Output Video Format | SDI 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps 1080i 50/59.94 fps 720p 50/59.94/60 fps 480i / 525 lines 576i / 625 lines |
Standards
| Video Standard Compliance | SMPTE ST-2110 |
IP Streaming
| Video IP Decoding | RTP: 640 x 480 to 1920 x 1080 at 23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 59.94p, 60p |
| Audio IP Decoding | AES67 |
Hardware
| Wi-Fi | None |
Power
| Power Consumption | Device: 5 to 20 VDC (13 W) |
Environmental
| Operating Temperature | 32 to 104°F / 0 to 40°C |
| Storage Temperature | -40 to 140°F / -40 to 60°C |
| Operating Humidity | 10 to 90% |
General
| Dimensions | 5.07 x 5.06 x 0.94" / 128.8 x 128.5 x 23.9 mm |
| Weight | 0.6 lb / 0.27 kg |
In the Box
- AJA SMPTE ST 2110 IP to SDI Mini-Converter
- 5-Year Manufacturer Warranty
No posts found
