Bolin Technology D20H Dante AV Transceiver (HDMI)

Configure this D20H Dante AV Transceiver from Bolin Technology as either a encoder or decoder depending on your routing needs. The D20 features an HDMI input and HDMI output for monitors. The HDMI output port supports up to DCI or UHD 4K60 video with HDCP 2.2 for demanding conference room or classroom applications.

Two RJ45 ports, one for Gigabit Ethernet and one with PoE support, offer connection to your IP network. Another RJ45 port offers RS-422 serial control, which is just one form of control you can utilize with the transceiver. USB Type-A ports can connect keyboards and/or mice to the device for USB-over-IP interfacing. An IR transmitter output and receiver input allows for remote control.

Synchronized Video & Audio

The D20H Dante AV transceiver supports sub-microsecond video and audio synchronization by designating a single network clock that always keeps the video in sync with audio regardless of the number of endpoints in the ecosystem, fixing lip-sync problems.

Multi-Screen Video Display Routing

As a decoder with unicast and multicast capabilities, the D20H receives the signal from a Dante AV PTZ camera or an encoder and feeds it to a display device via the output port. Using the controller software, the decoder can quickly and easily switch between multiple endpoints with no need for breakouts or matrix switches to display the video on any number of screens.

Encoder/Decoder Configurable

The transceiver can be configured as an individual encoder or decoder via a firmware update.

HDMI Output with Built-In High-Quality Scaler

The D20H can output 4K60 images via its HDMI ports. An integrated high-performance scaling engine provides downscaling to the encoded source for a wide array of 4K, UHD 4K, and HD resolutions to match the different capabilities and requirements of other equipment.

Dante Audio over IP

It supports standard Dante compatible networked audio streams from encoders and audio interfaces. The received Dante audio streaming can be combined with the video and then output via the HDMI ports.

Device Control

A built-in RS-422 serial port can be used with a PTZ joystick controller. Full setup, control, and monitoring of the device is enabled with the Dante Controller software with features like automatic device discovery and system configuration. Two USB Type-A ports and a USB Mini-B port provide control over IP using a keyboard and/or mouse with a remote computer.