Bolin Technology Dante AV-H Decoder Overview
Send Dante AV audio and video to your displays with this Dante AV-H Decoder from Bolin Technology. The EG40DH features high-bandwidth Dante AV Ethernet input and HDMI 2.0 and 12G-SDI output for monitors. Both HDMI and 12G-SDI output ports support up to UHD 4K60 video for demanding conference room, house of worship, live event, or education applications.
The decoder features full Dante support, including discovery, management via Dante Controller software, and it easily fits into your Dante AV network with its plug-and-play setup. It supports all Bolin Dante AV-H PTZ cameras, scaling from 720p to UHD 4K60, and transport in H.264/AVC and H.265/HEVC formats. The compact design allows you to mount it into a standard 1 RU rack, and it can be powered using the included power adapter or via your PoE+ network.
Quick Features
- Supports up to 4K60 resolution
- Dante AV-H supported with standard HEVC, and FAST HEVC (ultralow latency)
- Fully compatible with Dante ecosystem hardware and software
- HDMI 2.0 + 12G-SDI video output
- Dual output between HDMI and SDI
- Video upscalable from 720p up to UHD 4K60 max
- All video with audio embedded
- Audio intercom with front-end device
- On-screen character generator
- Firmware upgrade via IP
- PoE+ and 12 VDC power input
High-Quality, Low Bandwidth Video Output
The EG40DH outputs up to UHD 4K60 video with low latency and very low bandwidth (± 50 Mb/s) across the Dante AV network, giving customers additional flexibility and network management options.
Dante AV-H and Dante Audio Compatible
Full compatibility with all Dante AV-H cameras and encoders and all Dante-enabled mixers, audio devices, and encoders, with support for up to eight channels of audio embedded in the video output.
HDMI and SDI Output
Support for simultaneous HDMI 2.0 and 12G-SDI outputs to monitors or Vision Mixers.
IP Decode Support
There is FPGA decoding support for RTSP, SRT, MPEGTS IP streams, HEVC, and FAST HEVC, making it compatible with Bolin's FAST HEVC cameras, decoders, and all standard HEVC streams.
Production Audio Support
The TRRS Audio intercom port on the front provides support for live production intercom.
Full Dante Controller Support
Device discovery, management, routing, monitoring, and firmware upgrades are enabled through the familiar and reliable Dante Controller software, providing a simple, plug-and-play experience.
Video Upscalable
Upscales lower resolution HDMI and SDI video to maximum from 720p up to UHD 4K60 output. Downscaling is available.
Flexible Power Options
Power the unit via PoE+ (Power over Ethernet) and 12 VDC power input (a power adapter is supplied).
Convenient Mounting Options
The small, 1/3 RU form factor offers a variety of horizontal and vertical mounting options, including rackmount, DIN rail, panel and wall mounts, VESA mounts, and tripod support.
Bolin Technology Dante AV-H Decoder Specs
Key Specs
| Video I/O | Input 1x RJ45 (Dante AV-H) Female Output 1x HDMI 2.0 Female 1x BNC (12G-SDI) Female |
| Embedded Audio | LAN (RJ45) Input: 2-Channel HDMI/SDI Output: 2-Channel |
| IP Video | Decoding H.264/H.265/RTP/RTSP/SRT/UDP 3840 x 2160 at 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p 1920 x 1080 at 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p 1280 x 720 at 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p |
| IP Audio | Decoding AAC-LC/Dante 64 to 256 Kb/s |
| Simultaneous Streams | 1 Streams |
| Power Consumption | Device: 12 VDC at 2 A (18 W) |
| Audio I/O | Output 1x 1/8" / 3.5 mm TRS Stereo Analog Female 1x 1/8" / 3.5 mm TRRS Headphone/Microphone Stereo Analog Female |
| Embedded Audio | LAN (RJ45) Input: 2-Channel HDMI/SDI Output: 2-Channel |
Standards
| Broadcast System Compatibility | NTSC, PAL |
IP Streaming
| IP Video | Decoding H.264/H.265/RTP/RTSP/SRT/UDP 3840 x 2160 at 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p 1920 x 1080 at 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p 1280 x 720 at 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p |
| IP Audio | Decoding AAC-LC/Dante 64 to 256 Kb/s |
| Transport Protocols | Dante |
| Simultaneous Streams | 1 Streams |
Hardware
| Wireless | No |
| Cellular Support | No |
Power
| Power I/O | 1x Barrel (12 VDC at 2 A) Input |
| PoE Support | PoE+ 802.3at |
| Power Consumption | Device: 12 VDC at 2 A (18 W) |
Environmental
| Operating Temperature | 32 to 122°F / 0 to 50°C |
| Storage Temperature | -40 to 140°F / -40 to 60°C |
| Operating Humidity | 10 to 90% |
| Storage Humidity | 10 to 90% (Non-Condensing) |
General
| Rack Form Factor | 1 RU |
| Dimensions | 5.9 x 5.6 x 1.7" / 150 x 142 x 44 mm |
| Weight | 2.31 lb / 1.05 kg |
In the Box
- Bolin Technology Dante AV-H Decoder
- Power Adapter
- IR Remote Controller
- Surface Mount Kit
- Base Mount Kit
- 2-Year Manufacturer Warranty
No posts found
