Autoscript ClockPlus Overview
The simply attaches to the talent monitor of your EVO-IP monitor. It also integrates with the EPIC-IP prompter system. The CLOCKPLUS-IP receives its information through the prompt monitor of an EVO-IP or EPIC prompter system, and it displays the timecode in two-digit displays for hours/minutes/seconds with either a 12- or 24-hour mode. It supports NTP via Ethernet, LTC via BNC, VITC via a composite signal over BNC, and D-VITC via an HD-SDI signal over a BNC connector. Please note that VITC and D-VITC require a VITC/D-VITC enabled monitor. The CLOCKPLUS-IP also displays tally by changing the color of its display.
The display changes from green to red when a tally signal is applied, indicating the camera is active
Timecode, tally, and camera number information, all visible through the lens
Attaches easily to EVO-IP monitor to create an attractive information system
Integrates to ETM in EPIC prompter configuration
Configures with WinPlus-IP software application (not included)
Autoscript ClockPlus Specs
| Display Format | HH:MM:SS 12/24-Hour Mode |
| Inputs | NTP: 1 x RJ45 (Ethernet) LTC: 1 x BNC VITC: 1 x BNC (Composite) D-VITC: 1 x BNC (HD-SDI) |
| Dimensions | 13.23 x 1.85 x 1.18" / 33.6 x 4.7 x 3 cm |
| Weight | 16.4 oz / 465 g |
Packaging Info
| Package Weight | 2.415 lb |
| Box Dimensions (LxWxH) | 17.4 x 13 x 5.3" |
In the Box
- Autoscript CLOCKPLUS-IP Timecode Display for EVO-IP and EPIC-IP Prompters
- 2-Year Manufacturer Warranty
No posts found
