Timecode Systems :pulse Overview
The :pulse from Timecode Systems is a multifunctional timecode and metadata hub and device control center designed for multicamera setups that allow you to view, monitor, and control any B:LINK-enabled device and compatible camera or audio device from a smartphone, tablet, or computer. It can be used to provide a zero-drift timecode and genlock sync for video and film applications.
The large-capacity LiPo internal battery is constantly charged from any of the power inputs and will run the unit for a minimum of 3 to 4 hours with RF, Wi-Fi, and Ethernet switched on. It is suitable for camera battery swaps or location moves.
Additionally, the :pulse has a solid aluminum casing and features a high-resolution blue OLED display. It offers flexible mounting methods and multiple powering options and can be configured as either an RF slave device or a master device.
The Mini Base Station
Add the mini base station to your multicamera setup and experience the full benefits of the B:LINK protocol. Monitor and control any B:LINK-enabled device or compatible camera and audio devices from your smartphone, tablet, or computer, all while providing accurate zero drift timecode and genlock for your production
User-Friendly Features
The :pulse also has a solid aluminum casing and features a high-resolution blue OLED display, flexible mounting methods, and multiple powering options. It has UART, RS-232/RS-422 connectivity, Ethernet/Wi-Fi/USB connectivity, and simultaneous long-range RF sync and B:LINK networking features
Zero Drift Between Units
Configured as an RF slave device, the :pulse's timecode and sync generator is soft-jammed twice a second via the long-range robust ISM band RF, meaning zero drift between units. The B:LINK network allows the :pulse to either operate as a B:LINK master device or a B:LINK slave device
Timecode Systems :pulse Specs
| Display | Blue OLED: 128 x 32 pixel resolution |
| Supported FPS Modes | 23.976, 24, 25, 29.97, 30, 29.97DF, 30DF |
| Timecode Input | LEMO 5-pin connector |
| Connectivity | Wired: Ethernet, USB, UART, RS-232, RS-422, LANC |
| Frequency | 865 to 923 MHz, Worldwide ISM bands, 2.4 GHz 802.11g Wi-Fi |
| Power | Backup LiPo rechargeable battery with 3 to 4 hours of operation 5 V micro-USB connector LEMO2 9 to 36 VDC |
| Timecode Output | 3 x Buffered outputs on BNC, LEMO 5-pin, and separate LEMO 9-pin connectors Selectable Mic or Line output level on LEMO 5-pin |
| Output Sync Modes | PAL, NTSC, 720p, 720p double frame, 1080i, 1080p, 1080p double frame, Word Clock 44.1, 48.2, 48, 96, 192 kHz |
| Output Video Sync | 1 Vpp, 75 Ohms or 1 Vpp, 37.5 Ohms for High-Level Genlock mode (3D camera rigs) |
| Dimensions | 3.7 x 2.6 x 0.91" / 94 x 67 x 23 mm |
| Weight | 8.1 oz / 230 g |
Packaging Info
| Package Weight | 1.2 lb |
In the Box
- Timecode Systems :pulse Multifunctional Timecode & Metadata Hub & Device Control Center
- USB Cable
- Power Adapter
- 2-Years Manufacturer Warranty
No posts found
