Atlona HDBaseT HDMI/VGA Extender Kit with Three-Input Switcher and Scaler

The HDBaseT HDMI/VGA Extender Kit with Three-Input Switcher and Scaler from Atlona is a complete A/V integration solution with A/V switching, HDBaseT extension, HD scaling, automatic display control, and automatic input selection. It s a small yet full-featured presentation system in just two boxes. The transmitter installs neatly below a meeting table or in a lectern, while the receiver can be tucked away behind a display or above a projector.

Atlona Three-Input HDMI/VGA Switcher & HDBaseT Transmitter with PoE

Transmit 1080p HDMI and VGA signals over category cable up to 230 with this Three-Input HDMI/VGA Switcher & HDBaseT Transmitter from Atlona, featuring two HDMI inputs and one VGA with audio. Used in combination with an HDVS-150-RX receiver (available separately), this unit provides a compact, automated A/V system with the convenience of automatic input selection and display control. The switcher is remotely powered by the HDVS-150-RX through Power over Ethernet (PoE).

Featuring automatic display control, the HDVS-150-TX can trigger a display to power on automatically whenever a laptop or other device is connected. At the end of the presentation, when the presenter disconnects the laptop, the HDVS-150-TX forces the display to power off. A power button on the front panel can be used for manual on/off control of the display. Surface mounting brackets are provided with the HDVS-150-TX for easy installation under a table or on a wall.

3x1 HDBaseT Switcher

• Two HDMI inputs plus one VGA input with audio
• Allows HDMI display devices to be used with legacy VGA sources

Note:

Audio signals do not pass without an accompanying video signal

Point-to-Point Extension to AT-HDVS-150-RX Scaler Receiver

• Extends A/V up to 230 at 1080p or 1920 x 1200
• Compact, automated A/V system with automatic input selection and display control

Long-Distance HDMI Extension

• Transmits A/V up to 230 at 1080p or 130 at UHD 4K using Cat 6a/7 cable
• Uses easy-to-integrate category cable for low-cost, reliable system installation

Note:

Allows UHD 4K transmission when used with a compatible HDBaseT receiver

Remotely Powered via PoE (Power over Ethernet)

• IEEE 802.3af PoE-powered device
• Power for transmitter is supplied by AT-HDVS-150-RX over HDBaseT

Automatic Input Selection Using Hot-Plug Detection

• Selects active input when sources are connected or if there is a change in source power status
• Enables simplified, automatic system operation with no user intervention necessary

Automatic Display Control (When Connected to HDVS-150-RX)

• Automatically changes display power state based on active or standby mode of the switcher (in conjunction with the HDVS-150-RX)
• Control signals to display are transmitted via RS-232
• Eliminates the need for a complex control system

Front Panel Input Selection and On/Off Controls

• Overrides auto-switching when more than one active source is present
• Simple manual operation allows presenter to maintain control of A/V system

Field-Updatable Firmware

• Rear-panel USB port provides an easy means for device updates

Front Panel Power and Input Selection Status LEDs

• LED indicators provide power and input selection status information
• Easy setup and troubleshooting

Application Examples

• In education environments, the HDVS-150-TX can be placed in a lectern for use with sources such as a laptop and document camera
• In corporate environments, the switcher can be installed below a boardroom conference table to allow presenters to easily connect their laptops to the system

EAN: 846352004774

Atlona HDBaseT Scaler Receiver with HDMI & Analog Audio Outputs

Receive 1080p HDMI and VGA signals over category cable from up to 230 with this HDBaseT Scaler Receiver from Atlona. Used in combination with an HDVS-150-TX switching transmitter (available separately), this unit provides a compact, automated A/V system with the convenience of automatic input selection, display control, and HD scaling. The HDVS-150-RX powers the HDVS-150-TX remotely through Power over Ethernet, saving time and integration costs. It can be surface-mounted behind a display or above a projector.

The HDVS-150-RX offers image adjustment capability and automatically matches incoming signals to the display s native resolution. Integrated scaling and video processing help optimize image quality and switching performance. This receiver also features audio de-embedding and third-party RS-232 control of the scaler, switcher, and display. Featuring automatic display control, the HDVS-150-RX can trigger a display to power on automatically whenever a laptop or other device is connected to the HDVS-150-TX. At the end of the presentation, when the presenter disconnects the laptop, the HDVS-150-RX forces the display to power off. The HDVS-150-RX display control capability can also be triggered by an external control system.

Audio De-Embedding

• Provides two-channel, analog audio signal on balanced captive screw connectors
• Improves A/V system audio with the use of an external amplifier such as the AT-PA100-G2 (available separately)

Long-Distance HDMI Extension

• Receives HDMI and VGA/audio signals up to 230 at 1080p over Cat 6a/7 and 197 at 1080p over Cat 5e/6
• Uses easy-to-integrate category cable for reliable system installation

HD Video Scaler with HDMI Output and Input Resolution Control

• Scales video signals up to 1080p at 60 Hz and 1920 x 1200
• Selectable input resolution from 800 x 600 to 1920 x 1200 for a PC source
• Incoming signals can be automatically scaled to the display s native resolution

EDID Management

• Manages EDID communications with a source connected to the HDVS-150-TX
• Allows integrators to set or match a PC s graphics resolution

HDCP Management

• HDCP compliance can be disengaged through the on-screen menu, control software, or a control system
• Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems protected content is not transmitted

RS-232 Scaler and Switcher Control

• Input switching (at the AT-HDVS-150-TX), image adjustments, resolution settings, and auto-set to display s native resolution can be made from a third-party control system
• Seamless integration with larger, control system-based A/V systems

RS-232 Display Control

• Facilitates on/off display control
• Included software simplifies programming
• Eliminates need for complex control system in small A/V system

Power over Ethernet for AT-HDVS-150-TX

• Industry-standard IEEE 802.3af PoE supplied by the receiver to the AT-HDVS-150-TX transmitter over HDBaseT
• No local AC outlet is required for powering the AT-HDVS-150-TX transmitter

Field-Updatable Firmware

• Rear-panel USB port provides an easy means for device updates

EAN: 846352004767