Blustream IP50HD-TX Contractor Series HD Video Transmitter

Blustream IP50HD Overview

The Blustream IP50HD-TX Contractor Series HD Video Transmitter sends up to a 1080p60 HDMI signal, bidirectional IR, RS-232, and KVM signals up to 328 over a single Cat cable. An HDMI loop output allows connecting a local display or cascading multiple devices. The transmitter can be used in a standard point-to-point setup with the optional IP50HD-RX receiver or in matrix distribution mode, which requires a 100 Mb/s network switch.

Key Features

• Unicast transmission over unmanaged networks
• Multicast transmission for large managed networks
• H.265 compression
• PCM audio support
• PoE for powering Blustream products via an optional PoE switch
• HDCP 1.4 compliant
• Advanced EDID management
• Analog L/R audio embedding and audio breakout
• Latency of three frames no latency on HDMI loop output

Inputs

• 1 x HDMI
• 1 x 3-pin Phoenix audio input
• 1 x 3.5mm IR stereo jack

Outputs

• 1 x HDMI loop output
• 1 x RJ45 LAN connector
• 1 x 3-pin Phoenix audio output
• 1 x 3.5mm IR mono jack

Other Connections

• 1 x 3-pin Phoenix RS-232 serial port
• 1 x USB-B KVM host port