Gefen 4K Ultra HD 600 MHz HDBaseT Extender Set with HDR, 2-Way IR & PoL (132 )
EAN: 888814999938
Extend full-bandwidth HDMI 2.0 with HDR up to 132 over a single Cat 5 or better cable with the 4K Ultra-HD 600 MHz HDBaseT Extender Set from Gefen, supporting 18.2 Gb/s of data throughout and 600 MHz TMDS clock frequency. Featuring HDBaseT technology as well as Gefen s compression algorithms with high peak signal-to-noise ratio, this extender set accommodates resolutions up to 4K Cinema-DCI and 4K Ultra-HD with high dynamic range. HDR delivers greater contrast between light and dark areas of a video image, resulting in enhanced picture quality and color depth.
This extender set supports both HDCP 2.2 and HDCP 1.4 encryption, as well as 1080p full HD, WUXGA 1920 x 1200, 3DTV, and Deep Color at up to 1080p resolution. High-performance multichannel digital audio, including 7.1 channels of LPCM and HBR digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio, are passed through to the HDMI outputs. The GTB-UHD600-HBTL provides RS-232 and two-way IR extension between sender and receiver, facilitating the control of A/V sources placed near the sender and sending automation commands to the display or another device placed near the receiver.
Gefen s bidirectional PoL technology powers the sender or the receiver unit using the same cable that extends the HDMI signal. Only one of the two units needs to be fed by a power supply. This feature simplifies installation when no electrical outlets are available near the source or the display. Small and low-profile, the sender and receiver enclosures can be securely surface-mounted and hidden away from sight. They accommodate locking HDMI cables (included).
Supports 18.2 Gb/s bandwidth and 600 MHz TMDS clock
Extends HDMI & bidirectional IR over a single Cat 5e or Cat 6a cable
HDMI features supported:
Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920 x 1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (available separately)
IR extension from sender to receiver and from receiver to sender
Bidirectional PoL provides power to the sender or the receiver unit over the link cable-only one side needs external power
Uses Gefen s implementation of HDBaseT technology with proprietary algorithms and enhanced features
Advanced EDID management
Firmware updatable via external Gefen Syner-G port
Locking power connector
Surface mountable
Plug & play-no configuration or setup required for most applications
Compact sender and receiver enclosures are easy to install and can be hidden away
EAN: 888814999938
Extend full-bandwidth HDMI 2.0 with HDR up to 132 over a single Cat 5 or better cable with the 4K Ultra-HD 600 MHz HDBaseT Extender Set from Gefen, supporting 18.2 Gb/s of data throughout and 600 MHz TMDS clock frequency. Featuring HDBaseT technology as well as Gefen s compression algorithms with high peak signal-to-noise ratio, this extender set accommodates resolutions up to 4K Cinema-DCI and 4K Ultra-HD with high dynamic range. HDR delivers greater contrast between light and dark areas of a video image, resulting in enhanced picture quality and color depth.
This extender set supports both HDCP 2.2 and HDCP 1.4 encryption, as well as 1080p full HD, WUXGA 1920 x 1200, 3DTV, and Deep Color at up to 1080p resolution. High-performance multichannel digital audio, including 7.1 channels of LPCM and HBR digital audio formats such as Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio, are passed through to the HDMI outputs. The GTB-UHD600-HBTL provides RS-232 and two-way IR extension between sender and receiver, facilitating the control of A/V sources placed near the sender and sending automation commands to the display or another device placed near the receiver.
Gefen s bidirectional PoL technology powers the sender or the receiver unit using the same cable that extends the HDMI signal. Only one of the two units needs to be fed by a power supply. This feature simplifies installation when no electrical outlets are available near the source or the display. Small and low-profile, the sender and receiver enclosures can be securely surface-mounted and hidden away from sight. They accommodate locking HDMI cables (included).
Supports 18.2 Gb/s bandwidth and 600 MHz TMDS clock
Extends HDMI & bidirectional IR over a single Cat 5e or Cat 6a cable
HDMI features supported:
- HDMI 2.0, full bandwidth to 18 Gb/s / 600 MHz
- HDR 10-bit color at 4K 60 Hz 4:2:0 and 4K 24 Hz 4:4:4
- HDCP 2.2 and 1.4
- 12-bit Deep Color at 1080p
- Uncompressed LPCM digital audio up to 7.1 channels
- HBR (High Bit Rate) digital audio up to 7.1 channels, including Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio
- 3DTV pass-through
- CEC pass-through
- Lip Sync pass-through
Supports the use of DVI sources and DVI displays up to 1080p Full HD and WUXGA (1920 x 1200), with Gefen CAB-DVI2HDMI-LCK DVI-to-HDMI cables (available separately)
IR extension from sender to receiver and from receiver to sender
Bidirectional PoL provides power to the sender or the receiver unit over the link cable-only one side needs external power
Uses Gefen s implementation of HDBaseT technology with proprietary algorithms and enhanced features
Advanced EDID management
Firmware updatable via external Gefen Syner-G port
Locking power connector
Surface mountable
Plug & play-no configuration or setup required for most applications
Compact sender and receiver enclosures are easy to install and can be hidden away
Gefen GTB-UHD600-HB Specs
| Resolution and Distance | 4K Ultra HD 3840 x 2160 to 60 Hz, 4:4:4, up to 132` / 40 m, 8-bit color 4K Cinema (DCI) 4096 x 2160 to 60 Hz 4:4:4, up to 132` / 40 m, 8-bit color 1080p Full HD 60 Hz and WUXGA 1920 x 1200 to 60 Hz, up to 200` / 60 m, up to 12-bit Deep Color |
| TMDS Clock Frequency | 600 MHz max |
| Bandwidth | 18.2 Gb/s, total |
| Video Input Connector | Sender/Receiver: 1 x HDMI Type A 19-pin, female, locking |
| Ports | 1 x RJ45 per unit, shielded 1 x Gefen Syner-G per unit, 3-pin Phoenix 1 x IR in/ext per unit, 3.5 mm mini-stereo jack 1 x IR out per unit, 3.5 mm mini-mono jack |
| IR Extender | EXT-RMT-EXTIRN |
| LED Indicators | Power: 1 per unit (blue) Link: 1 per unit (green) HDMI-Active: 1 per unit (green) |
| Power Supply | Single, 12 VDC, locking, 5.5 mm barrel / 2.1 mm pin |
| Power Consumption | 14 W maximum, both units combined |
| Operating Temperature | 32 to 113°F (0 to 45°C) |
| Operating Humidity | 5 to 90% RH, non-condensing |
| Storage Temperature | -4 to 185°F (-20 to 85°C) |
| Storage Humidity | 0 to 95% RH, non-condensing |
| MTBF | 50,000 hours |
| Dimensions | Sender/Receiver: 4.7 x 1.0 x 2.9" / 11.9 x 2.6 x 7.3 cm |
| Weight | Sender/Receiver: 0.3 lb / 0.14 kg |
Packaging Info
| Package Weight | 2.2 lb |
| Box Dimensions (LxWxH) | 10.4 x 7.1 x 3.9" |
In the Box
- Gefen 4K Ultra HD 600 MHz HDBaseT Extender Set with HDR, 2-Way IR & PoL (132`)
- HDMI-to-HDMI Male-to-Male Locking Cable (6`)
- 12 VDC Power Supply with US/EU/UK/AU AC Plugs & 5.5/2.1mm DC Plug
- 3-Year Manufacturer Warranty
No posts found
