Key Digital 4K/18G HDMI over Single Cat 5e/6 Cable Extender Set with Power over CAT, HDMI Pass Thru, IR, RS-232
EAN: 815996022178
The Key Digital 4K/18G HDMI over Single Cat 5e/6 Cable Extender Set with Power over CAT, HDMI Pass Thru, IR, RS-232 Provides fully automatic equalization to send video signals up to 406 x 2160 up to 328 over Cat6 cable.
EAN: 815996022178
The Key Digital 4K/18G HDMI over Single Cat 5e/6 Cable Extender Set with Power over CAT, HDMI Pass Thru, IR, RS-232 Provides fully automatic equalization to send video signals up to 406 x 2160 up to 328 over Cat6 cable.
- Single CAT5e/6 UTP/STP Extension:
- Fully automatic equalization, and amplification depending on cabling length
- 4K Resolution Support:
- 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Flexible Power over CAT (PoC):
- Only one power supply needed. Connect at Tx or Rx unit.
- Visually Lossless Compression:
- 18G enabling technology applied to all video formats exceeding 10.2Gbps to accommodate transmission channel
- Low Profile:
- Super slim chassis design
- Signal Extension: For resolution and cable quality
- 4K/UHD (18G) with CAT5e/6: Up to 230
- 4K/UHD (18G) with CAT6A STP: Up to 328
- 1080p with CAT5e/6: Up to 230
- 1080p with CAT6A: Up to 328
- 10G Pass-thru:
- Mode enables uncompressed 10.2Gbps signal extension.
- HDR10 (High Dynamic Range):
- More life-like images through a greater range of luminance levels
- HDCP 2.2:
- Compliancy up to HDCP 2.x and backward compliant
- Deep Color Support:
- Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
- IR Sensor:
- Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR:
- Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
- RS-232:
- Bi-Directional control to/from Tx and Rx unit on Phoenix connector
- Full Buffer Technology:
- Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles
- EDID Management:
- Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
- HDCP Authentication:
- HDCP sources are authenticated by HDCP key on transmit unit, for one-to-one topology
- Hot Plug Detection Control:
- Enables integrator to choose if active signal voltage is forced to connected display/output device
- TMDS Re-Clocking:
- Re-generation of TMDS (AV signal) channel data at Transmit unit for brand new AV signal
- Surround Audio Support:
- on HDMI pass-thru and UHDoTP outputs:
- HDMI Pass-Thru: Supports Dolby DolbyTrueHD, DTS and DTS-HD (formats up to 7.1)
- CAT5e/6 Output: Supports Dolby, DTS (formats up to 5.1/6.1)
Key Digital X444LP Specs
Transmitter Interfaces
| Inputs | 1 x HDMI |
| Outputs | 1 x RJ45 1 x HDMI |
| Transmitter Other I/O | 1 x Block 3-Pin RS-232 1 x 1/8" / 3.5 mm IR Input 1 x 1/8" / 3.5 mm IR Output |
Receiver Interfaces
| Inputs | 1 x RJ45 |
| Outputs | 1 x HDMI |
| Receiver Other I/O | 1 x Block 3-Pin RS-232 1 x 1/8" / 3.5 mm IR Input 1 x 1/8" / 3.5 mm IR Output |
Standards
| Reclocking | Yes |
| HDCP Support | Version 2.2 |
| EDID Support | Yes |
Transmission
| Max Transmission Distance | DCI 4K: 328.1` / 100 m (via Cat 6a) |
| Supported Cable Types | Cat 5e/6/6a |
Power
| Transmitter Power Connector | 1 x Barrel Input |
| Receiver Power Connector | 1 x Barrel Input |
| PoE Support | Yes |
General
| Transmitter Dimensions | 4.3 x 4.1 x 0.8" / 109.2 x 104.6 x 20.8 mm |
| Receiver Dimensions | 4.3 x 4.1 x 0.8" / 109.2 x 104.6 x 20.8 mm |
| Transmitter Weight | 9.5 oz / 270 g |
| Receiver Weight | 9.5 oz / 270 g |
Packaging Info
| Package Weight | 2.43 lb |
| Box Dimensions (LxWxH) | 10.7 x 5.7 x 3.2" |
In the Box
- Key Digital 4K/18G HDMI over Single Cat 5e/6 Cable Extender Set with Power over CAT, HDMI Pass Thru, IR, RS-232
- 12 VDC Power Supply
- 4 x Mounting Bracket
- IR Emitter
- IR Sensor
- 3-Year Manufacturer Warranty
No posts found
