Kramer WP-571 Active 1-Gang Wall Plate HDMI over Twisted Pair Transmitter (White)

Kramer, Condition:New, MPN:WP-571(W)
177.39
14 Days
Price in points: 178 points
Reward points: 1 point
KRWP571W
In stock
+

Minimum quantity for "Kramer WP-571 Active 1-Gang Wall Plate HDMI over Twisted Pair Transmitter (White)" is 1.

Ships within 48 hours, Ships from our european warehouse, Low-cost shipping all over Europe, New product, Local european warranty, 14 Day money back guarantee
Shipping time and rates:
Yes, we can ship to United States
Kramer WP-571 Active 1-Gang Wall Plate HDMI over Twisted Pair Transmitter (White)

The white WP-571 Active 1-Gang Wall Plate HDMI over Twisted Pair Transmitter from Kramer is a DGKat twisted pair transmitter for HDMI signals. The WP-571 converts an HDMI signal to a twisted pair signal and transmits it to a WP-572 (not included), which converts the twisted pair signal back to an HDMI signal. The transmitter supports a maximum data rate of up to 4.95 Gb/s. DGKat twisted technology converts TMDS as well as control and communication to signals that run over twisted pair cables. EDID PassThru passes EDID signals between the source and display. Asingle connection to the transmitter powers the receiver.

Maximum data rate of up to 4.9 Gb/s (1.65 Gb/s per graphic channel)

HDTV compatible

HDCP compliant

DGKat Signal Integration technology converts TMDS as well as control and communication to signals that run over twisted pair cables

HDMI Support - HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD

3D pass-through

System Range:
Up to 295 (90m) at 1080i, or up to 98 (30m) at 1080p on shielded BC-DGKat524 cable
Up to 295 (90m) at 1080i, or up to 230 (70m) at 1080p on shielded BC-DGKat623 cable
Up to 330 (100m) at 1080i or up to 295 (90m) at 1080p on shielded BC-DGKat7a23 cable.

Requires shielded twisted pair (STP) cable

EDID PassThru passes EDID signals between the source and display

ON LED - Lights red when receiving power only, orange when either input or output and power are attached, and green when both an active input and output are attached

Single connection to the transmitter powers the receiver

1-gang US wall plate

Used in board, conference, and training rooms, presentation systems, signal distribution, and home theater

Kramer WP-571 Specs

Inputs1 x HDMI connector
Outputs1 x RJ45 twisted pair, DGKat
BandwidthUp to 4.95 Gb/s data rate (1.65 Gb/s per graphics channel).
Compliance With HDMI StandardSupports HDMI and HDCP
Power ConsumptionUS: 12 VDC, 190 mA (single device); 360 mA total (when one device supplies the power to both devices)
Dimensions1.30 x 1.42 x 4.10" (3.3 x 3.6 x 10.4 cm)
Weight0.18 lb (0.08 kg)

Packaging Info

Package Weight0.9 lb
Box Dimensions (LxWxH)7.5 x 4.9 x 3.6"

In the Box

  • Kramer WP-571 Active 1-Gang Wall Plate HDMI over Twisted Pair Transmitter (White)
  • 12 VDC Power Supply
  • 7-Year Manufacturer Warranty

Not in the Box

  • Essential Transmitters & Receivers (Not Included)

No posts found

Write a review
Kramer WP-571 Active 1-Gang Wall Plate HDMI over WP-571(W)
Kramer WP-571 Active 1-Gang Wall Plate HDMI over Twisted Pair Transmitter (White)

The answer to your request will be sent to your email address.

Similar products

  • Free shipping
1,477.46
  • Free shipping
  • Low stock
1,027.74

At the same price!

  • Video
Pelican 1510 Carry-On Case with Foam Set (Desert Tan)
PE1510FDT
181.74
  • Video
Pelican 1510 Carry-On Case with Foam Set (Black)
PE1510FB
181.74