Kramer WP-572 Active 1-Gang Wall Plate HDMI over Twisted Pair Receiver (White)

Kramer, Condition:New, MPN:WP-572(W)
177.21
14 Days
Price in points: 178 points
Reward points: 1 point
KRWP572W
In stock
+

Minimum quantity for "Kramer WP-572 Active 1-Gang Wall Plate HDMI over Twisted Pair Receiver (White)" is 1.

Ships within 48 hours, Ships from our european warehouse, Low-cost shipping all over Europe, New product, Local european warranty, 14 Day money back guarantee
Shipping time and rates:
Yes, we can ship to United States
Kramer WP-572 Active 1-Gang Wall Plate HDMI over Twisted Pair Receiver (White)

The white WP-572 Active 1-Gang Wall Plate HDMI over Twisted Pair Receiver from Kramer is a DGKat twisted pair receiver for HDMI signals. The WP-571 (not included) converts an HDMI signal to a single twisted pair signal and the WP-572 converts the twisted pair signal back to an HDMI signal.

The receiver supports a maximum data rate of up to 4.95Gb/s. DGKat twisted technology converts TMDS as well as control and communication to signals that run over twisted pair cables. EDID PassThru passes EDID signals between the source and display. A single connection to the transmitter powers the receiver.

Maximum data rate of up to 4.95Gb/s (1.65Gb/s per graphic channel)

HDTV compatible

HDCP compliant

DGKat Signal Integration technology converts TMDS as well as control and communication to signals that run over twisted pair cables

HDMI Support - x.v.Color, up to 7.1 uncompressed audio channels

3D pass-through

System Range - Up to 295 (90m) at 1080i, or up to 98 (30m) at 1080p on shielded BCaˆ’DGKat524 cable
Up to 295 (90m) at 1080i, or up to 230 (70m) at 1080p on shielded BCaˆ’DGKat623 cable
Up to 330 (100m) at 1080i or up to 295 (90m) at 1080p on shielded BCaˆ’DGKat7a23 cable.

Requires shielded twisted pair (STP) cable

EDID PassThru passes EDID signals between the source and display

ON LED - Lights red when receiving power only, orange when either input or output and power are attached and green when both an active input and output are attached

Single connection to the transmitter powers the receiver

1-gang US wall plate

Used in board, conference, and training rooms, presentation systems, signal distributions and home theater

Kramer WP-572 Specs

Inputs1 DGKat twisted pair on a RJ 45 connector
Outputs1 HDMI connector
BandwidthUp to 4.95 Gb/s data rate (1.65 Gb/s per graphics channel).
Compliance With HDMI StandardSupports HDMI and HDCP
Power ConsumptionUS: 12 VDC, 190 mA (single device); 360 mA total (when one device supplies the power to both devices)
Dimensions1.3 x 1.42 x 4.1" (3.3 x 3.6 x 10.4 cm)
Weight0.18 lb (0.08 kg)

In the Box

  • Kramer WP-572 Active 1-Gang Wall Plate HDMI over Twisted Pair Receiver (White)
  • Power Supply
  • 7-Year Manufacturer Warranty

No posts found

Write a review
Kramer WP572 Active 1Gang Wall Plate HDMI over Twisted Pair Receiver White
Kramer WP-572 Active 1-Gang Wall Plate HDMI over Twisted Pair Receiver (White)

The answer to your request will be sent to your email address.

Similar products

  • Free shipping
1,477.46
  • Free shipping
  • Low stock
1,027.74
  • Video
286.99

At the same price!

  • Video
Pelican 1510 Carry-On Case with Foam Set (Desert Tan)
PE1510FDT
181.74
  • Video
Pelican 1510 Carry-On Case with Foam Set (Black)
PE1510FB
181.74